Kverneland Optima Range

Brochure Kverneland Optima Range

NAME PRODUCT BROCHURE PNEUMATYCZNY SIEWNIK PUNKTOWY OPTIMA PNEUMATIC PRECISION DRILL

WHEN FARMING

MEANS BUSINESS

Realising the full potential of farming is about growing and developing your business, not only your crop or livestock, but also your profit. Improve productivity and profitability by focusing on the positives and minimising disadvantageous aspects, through strong, dedicated management. Success springs from determination and clear targets, from laying down the appropriate strategy and allocating correct investments for the future. Quality results require the right ideas and equipment. When there is work to be done, you need the optimal setup and smart solutions that support you towards an easier, more profitable way of working. You need solutions that make tough and demanding conditions less complicated.

KVERNELAND OPTIMA

The iM Farming logo appears when the implement can be connected to our smart farming systems and accessories, essential for managing your business.

Effective sowing means speeding up when the soil is exactly right, in order to give your crop a head start. SOW

KVERNELAND OPTIMA

ARABLE TILLAGE SYSTEMS

YOUR KVERNELAND

INTELLIGENT FARMING SOLUTIONS

Choose the best farming solution for you and your land. Combine the highest possible yields with sustainability. This will start with the correct tillage. The choices you make depend on various factors and should match your specific circumstances, like soil structure, crop rotation, residue management, economic and ecological viabilities.

The choice is yours!

You must consider environmental and legal issues. From conventional methods to conservation tillage: the balance of operations at the right time has to be found to achieve high yields with the best soil condition (air, moisture, biological activity, etc.) with a minimum amount of energy, time and investment. For this, Kverneland offers a full range of intelligent farming solutions.

CONVENTIONAL TILLAGE

CONSERVATION TILLAGE

Conventional Tillage • Intensive method of cultivation

Mulch Tillage • Reduced intensity in terms of depth and frequency • More than 30% of residues are left on soil surface • Extended repose period of the soil • Cultivator and/or discs incorporate the crop residues within the top 10cm of soil for stable bearing soil • Full-width tillage - seedbed preparation and seeding in one pass • Protection against soil erosion; reduce soil loss by run-off and improve water storage capacity. • Improvement of soil moisture retention

Strip Tillage • Zonal strip loosening before or during seeding of up to 1/3 of the row width (Loibl, 2006). Up to 70% of the soil surface remains untouched • Strip-till combines the soil drying and warming benefits of conventional tillage with the soil-protecting advantages of no-till by disturbing only the area of the soil where the seeds are placed • Exact fertilising deposit • Soil protection against erosion and drought

Vertical Tillage / No-Till • Extensive method • Working soil vertically avoids additional horizontal layers or density changes • Increasing water infiltration, root development and nutrient take-up • Plants’ roots dictate the overall health of the plant, as they deliver nutrients and water throughout the season, contributing to a higher yield • A strong set of roots make plants more

• Complete soil inversion e.g. by a plough • Less than 15-30% crop residues left on soil surface • Seedbed preparation done by an active tool or special seedbed harrow • High phytosanitary effect by reduced pressure of weed and fungi diseases - fewer herbicides and fungicides needed • Better dry-off and faster increase of soil temperature for better nutrients absorption

resistant to wind and drought. • Lower energy input required

KVERNELAND OPTIMA

ARABLE TILLAGE SYSTEMS

KVERNELAND OPTIMA

EFFICIENCY

VERSATILITY

ACCURACY

INTELLIGENCE

KVERNELAND OPTIMA

EFFECTIVE SOWING

TO MAKE SOWING PERFECT

Accuracy The Optima is excellent in precise seed placement. You can be sure that the sowing unit follows the ground contour perfectly and the coulter forms a clean and clear furrow to ensure best seed-to-soil contact. You can seed perfectly in line and in relation to each other but also synchronised over the complete working width. Intelligence You invest in the best equipment for sowing your crop. In return you want the best results and to increase the yields significantly. With the Optima you have everything under control by ISOBUS Technology and Kverneland’s Precision Farming solutions.

Versatility You want a precision drill that is versatile. Ready for the various crops with smaller or bigger seeds, to sow shallow or deep. Ready to adjust to the various ways of tillage, standard or mulch seeding in different type of soils. Universal machines allow cost savings. Efficiency When the time is right, you want to sow immediately. The soil has to be prepared with care and the moment of sowing depends on the right conditions, like local weather. To be successful you need a precision drill that is reliable and effective.

With Optima you can rely on a perfect execution.

KVERNELAND OPTIMA

SOWING HEART HD-II

SEEDING HEART WITHOUT SEALS

NO FRICTION, NO WEAR.

Precise singulation of small, large, round, elongated and flat seeds. Scrapers can be infinitely adjusted to suit seed size and type. During calibration the correct filling of the seed disc can be monitored via a window.

Reduced maintenance costs.

The vacuum interruptor closes the holes of the seed disc from the back side. The vacuum is interrupted and the seeds drop down controlled from the seed disc.

By using a vacuum , the seeds are sucked out of the stock and transported directly to the seed disc. While turning the seed disc the seeds are allocated to each of the holes.

The opto-electronic sensor controls the correct allocation of seeds on the disc. In case of missing seeds, the sensor transfers a signal to the terminal. The opto-electronic sensor also serves as a low level sensor. The seed disc turns on to the point of drop. The seed disc is directly fixed to the turning back of the vacuum heart. No sealing in the seedheart (only at the bearing backside) ensures a constant vacuum, an easy rotation of the seed disc with minimised friction, low power requirement and no wearing.

The end-scraper cleans the seed disc from seed residues, like coating or dust.

The filling height limiter regulates the stream especially of small seeds.

The emptying flap at the lowest point of the seeding heart enables a complete, easy emptying and cleaning of the seeding heart. The vacuum hose connected with the fan or vacuum channel ensures constant vacuum. This is shown on a manometer, which is easily visible from the cab.

The adjustable, upper toothed scraper singulates the seeds - one to each hole.

The adjustable, lower scraper ensures high precision, even of bigger seeds. It turns the seed into the correct direction. This is important for elongated seeds like sunflowers.

KVERNELAND OPTIMA

SOWING HEART HD-II

KVERNELAND OPTIMA

STANDARD & TANDEM ROW

OPTIMUM PLACEMENT FOR PREPARED AND LIGHTER SOIL CONVENTIONAL SOWING

The sowing units - like the whole machine - are modular in design. The basic element always remains the same and the equipment can vary according to individual requirements.

2 sowing units for conventional tillage.

The Standard row is used in conventionally prepared soil conditions. Soil is not too heavy and the land is always ploughed. The parallelogram, sowing coulter with coverer and press wheel ensure good penetration and prevent blockages. The Tandem row is the right solution for light and marshy soil. The front wheel is connected to the press wheel with a bar. The depth of the row is guided by the front and rear wheel and can be centrally adjusted by a handle in the back.

Both row versions are available with 30 l seed hopper.

Standard

Tandem

KVERNELAND OPTIMA

HD.II

PERFECT SEED PLACEMENT WITH HD-II ROW MULCH AND CONVENTIONAL SOWING

The HD-II row is the universal sowing unit for all conditions from light to heavy soil or in conventional or mulch conditions. Safe operation despite plant residues.

Up to 100kg additional pressure.

• Optimal depth control even under extreme conditions, due to the heavy basic weight of the sowing unit with the possibility to add additional pressure (up to 100kg) onto each individual sowing unit via the spring-loaded system. • Effective ground contour following , due to the large lateral depth control by open gauge wheels (ø 410mm, width 120mm). • Precise seed placement by the small coulter which forms a clean furrow. Light re-compaction and seed covering is done by the intermediate press wheel (as option: heavy stainless steel) and the multi-adjustable V-press wheel - to ensure maximum field emergence.

1.2

1.0

0.8

0.6

Consistency of spacing At both speeds Optima placed the seeds within an accurate range.

0.4

0.2

8kph

10kph

Based on source: Top Agrar

Forward Speed

KVERNELAND OPTIMA

HD-II ROW

SOWING ROW HD-II

FOR LIGHT AND HEAVY SOIL

The stable patented cast-iron HD-II single Monoarm gives direct and easy access to the seeding heart with strong pivoting points.

Versatility and reliability are key.

60l (30l) seed hopper

Spindle for convenient and precise depth adjustment

Notched double disc fertiliser coulter for all soil conditions

Optional stainless steel intermediate press wheel or cast iron with rubber ring for best seed-to-soil contact 25mm (50mm) V-press wheels with pressure and angle adjustment for a safe closing of the furrow

410mm (273mm) parallelogram with additional 100kg (mechanical) weight transfer as standard Double disc coulter with exclusive bearings and patented sealing. Optional with quick-fit coulter tip either XHD version for sugar beet or standard for maize for easy switch between crops.

Optima seeding heart - precise and well- established

Optional falling channel “Channel extra” with/without Plantirium sensor for seed detection from rapeseed, sunflower or pumpkin

Open gauge wheel with oscillating connection for smooth depth guidance

KVERNELAND OPTIMA

HD-II ROW

XHD

13 KVERNELAND OPTIMA

HIGH SPEED ROW SX

KVERNELAND OPTIMA

HIGH SPEED ROW SX

THE SX SEEDING HEART

With the pressurised seeding heart the seeds are “shot” by an airstream of up to 70kph into the furrow. A smooth, flexible intermediate press wheel catches the delicate seeds. Any negative impact such as vibration on the way between release point and soil contact is eliminated due to the high air stream. The seeds reach their perfect position in the soil. Each sowing row is electrically powered by ISOBUS connection. An additional generator or other power sources are not required. The complete power supply and control is via ISOBUS. PRECISION AT HIGH SPEED

By using air pressure , the seeds are taken directly to the seed disc. Whilst turning the seed disc, the seeds are allocated to each of the holes. The filling height limiter regulates the stream of the seeds, especially of small seeds.

The seed disc rotates to the point of release. The seed disc is directly fixed to the turning back - closed only by a bearing. The seeding heart is without sealing for minimised friction, wear and power requirement. At the point of release, the seed drops down, controlled by the seed disc into the seed tube supported by the high air stream. An infrared photo sensor monitors the perfect allocation of the seed disc. Defects or doubles as well as low level alerts of the seed hopper and seed counter are reported to the terminal.

The adjustable upper toothed scraper singulates the seeds to every hole.

The adjustable lower scraper ensures that bigger seeds are turned in the correct position and same direction.

KVERNELAND OPTIMA

HIGH SPEED ROW SX

HIGH SPEED SOWING UNIT

The Optima SX high speed sowing unit ensures maximised performance and efficiency. With accurate seed singulation, precise seed placement and higher working speeds of up to 18km/h, the Optima SX row increases the performance and efficiency. The sowing row can be combined with the Optima R, Optima TFprofi, the multi-flexible telescopic Optima V, Optima F and large rigid Optima RS frames. All components are ready for high speeds. UP TO 18KM/H FOR UTMOST EFFICIENCY

• Optimum depth control due to the heavy basic weight of the sowing unit with the possibility to add additional pressure (up to 100kg) onto each individual sowing unit via spring-loaded system or optional hydraulically. • Effective ground contour following due to the large depth control by open gauge wheels (⌀410mm, with 120mm) • Precise seed placement by the small coulter which forms a clean furrow. Good placement and seed covering is done by the smooth flexible interme- diate press wheel and multi-adjustable V-press wheel. • Ready for PUDAMA and GEOFORCE

All basic components of the row (cast-iron Monoarm, parallelogram, double disc coulter, open gauge wheels, trash wheels, V-press wheels etc.) are taken form the well-known HD-II seeding row.

Pressurised Optima SX seeding heart. Without seals - no friction, no wear. Integrated electric motor with GEOSEED function. Smooth flexible intermediate press wheel for catching the seed to ensure good seed placement and recompaction.

60 litres seed hopper capacity.

High speed seed tube.

Infrared monitoring of singulation quality.

KVERNELAND OPTIMA

HIGH SPEED ROW SX

KVERNELAND OPTIMA

GEOFORCE ROW SX

GEOFORCE

AUTOMATIC SOWING DEPTH AND PRESSURE CONTROL OF THE ROW

The Kverneland GEOFORCE system is designed to meet the challenges of varying soil conditions by ensuring precise seed placement. Light soils require less pressure, while heavier soils demand more. The system adapts seamlessly, maintaining even depth control and consistent weight on the gauge wheel across different soil types and working speeds. Equipped with advanced sensor technology and double-acting hydraulic cylinders in the setup of the row parallelogram, GEOFORCE automatically adjusts oil pressure to keep each sowing unit at the optimal depth. This ensures uniform germination and consistent field emergence, even in compacted areas like tractor tracks.

A complete lifting of one or more rows is also feasible when creating tramlines.

GEOFORCE’s automated control minimizes operator workload, enhances sowing quality, and reduces production costs, resulting in higher, better-quality yields. Uniform seed placement promotes rapid leaf coverage, lowering weed pressure and the need for chemicals or mechanical weeding. The risk of bird damage and poor emergence from deep seed placement is minimized, benefiting shallow-sown seeds like rapeseed. Precise pressure application reduces fuel consumption by preventing bulldozing effects and allows smooth operation at higher speeds. Additionally, the system extends the lifespan of coulters and wearing parts through on-the-go pressure adjustments, supporting more efficient maintenance cycles.

GEOFORCE is available with the high-speed Optima SX sowing row for maximum efficiency and yield.

KVERNELAND OPTIMA

GEOFORCE ROW SX

GEOFORCE ensures a consistent sowing depth and automatic pressure control – fully independent of row weight or varying soil conditions. Target is to place every seed at the same depth for optimal emergence and growth. Field studies (Beck, 2014) show that automatic downforce systems can boost yields by 0.8% to 7.5%. Making GEOFORCE a smart step toward higher efficiency and productivity!

KVERNELAND OPTIMA

PUDAMA ROW SX

PUDAMA - TARGETED FERTILISER APPLICATION

100 % YIELD WITH 25 % LESS STARTER FERTILISER

PUDAMA ensures systematic, precise placement of starter fertiliser. This targeted application delivers nutrients exactly where they are needed for optimal growth.

PUDAMA offers targeted, discontinuous fertiliser placement directly around maize seeds, leading to better nutrient absorption by plant roots compared to conventional row fertiliser spreaders. This approach reduces fertiliser use between rows, cutting nitrate and phosphate runoff into water systems. Research from the University of Applied Sciences Cologne shows that PUDAMA can save at least 25% of starter fertiliser while maintaining yield potential. By using resources efficiently, PUDAMA supports sustainable crop production and protects soil, water, and air quality The fertiliser is collected at the fertiliser coulter in a defined quantity and shot by an airstream into the soil as a deposit. A sensor link between the fertiliser coulter and seeding unit ensures synchronised seed and fertiliser placement. The Optima SX PUDAMA achieves speeds up to 15 kph, placing up to 25 fertiliser spots per second.

The PUDAMA system can be integrated into the Optima TFprofi and Optima F models with SX high- speed rows.

PUDAMA

KVERNELAND OPTIMA

OPTIMA TFMAXI

OPTIMA TFmaxi

FOR MAXIMUM OUTPUT

Precise seed placement and high efficiency - that is Optima TFmaxi. Folding is activated easily from the tractor cab. Also all other functions are integrated in the ISOBUS steering system: electrohydraulic drive of the fertiliser applicator or the e-drive of the row units. In combination with GEOCONTROL the Optima TFmaxi is not only highly efficient - it’s also very precise. The Optima TFmaxi combines high performance technology with maximum user friendliness. The machine’s clear and logical layout coupled with the high level of intelligent technology offer the user maximum ease of use, from set-up and filling, folding in less than 1 minute and to the seeding operation. The telescopic drawbar frame allows seamless coverage of the field due to the overall length of the machine being reduced to allow tighter headlands turns.

The high performance Optima TFmaxi is equipped with a 4000l fertiliser hopper and 16 seed hoppers - 60l each. Despite the large capacity the pulling force is still low - starting from 240hp.

Optima TFmaxi Working width (m) Number of rows

12 16

Up to 100ha per day

Row width (cm)

70/75/80

HD-II row SX row

e-drive GEOCONTROL e-drive II / GEOSEED

Fertiliser

4000 l

Microgranule applicator

Possible

- Not available

KVERNELAND OPTIMA

OPTIMA TFMAXI

4,000 LITRES

UP TO 100HA/DAY

16 ROWS

12M WORKING WIDTH

KVERNELAND OPTIMA

OPTIMA RS

HIGH PERFORMANCE AND OUTPUT

The Optima RS frame is designed for farmers and contractors looking for a solid and easy solution, but high efficiency.

The Optima RS frame is available in working width from 6.1m to 9.3m. In order to offer maximum flexibility, the Optima RS frame can be adjusted to different row widths, starting from 35cm to 80cm in even and uneven configurations. It can be equipped with the full range of Kverneland sowing units: Optima HD-II and SX high speed sowing unit. The solid and strong frame made by an 180mm x 180mm square tube is ready to carry up to 18 HD-II or SX sowing units.

Compact on the street and wide in the field.

Optima RS Working width (m) Number of rows

The Optima RS frame can be fitted with a large 2000l fertiliser hopper or alternatively with f-drill front hoppers for a good weight distribution. In addition, the electric driven micro-granule applicator is available for up to 18 rows. For safe road transport, a strong lengthwise transport device is available – the machine complies with the EU Type approval and is ready for transport at 40 km/h even with 18 rows and fertiliser, thanks to the pneumatic brake system.

6.1

6.8

7.6

8.3

9.3

8-12

8-16

12-16 12-18 12-18

Row width (cm)

45-80 35-80

45-70 50-80

HD-II row SX row

e-drive-II / GEOCONTROL Mounted fertilizer 2000l Fertiliser in combination with f-drill front hopper Microgranule applicator * GEOFORCE

* Only in combiantion with SX/HD-II rows and e-drive II Possible - Not available

KVERNELAND OPTIMA

OPTIMA TFPROFI

OPTIMA TFprofi

Optima TFprofi Working width (m) Number of rows

6 8

MAXIMUM OUTPUT

Row width (cm)

70/75/80

HD-II row SX row e-drive II / GEOSEED Mounted fertiliser hopper (l)

The Optima TFprofi is the perfect combination of high performance and low tractor power requirement. The trailed, foldable frame with eight rows can be equipped with a 2000l fertiliser hopper. The Optima TFprofi can be operated by a 90hp tractor - requiring no lifting capacity. Equipped with either a hydraulic drive or with a direct fan drive via PTO shaft, this machine can also be used with tractors that have little hydraulic power.

2000

Microgranule applicator PUDAMA GEOFORCE

Possible

- Not available

Smooth running.

The Optima TFprofi can be equipped with 4 landwheels to ensure smooth running. Due to an intelligent adjustment system at the wheels, the sowing units perfectly follow the ground contour. The hydraulic cylinders of the landwheels are divided into two parts: one responsible for the lifting process and the other one for the following of the ground contours.

KVERNELAND OPTIMA

OPTIMA TFPROFI

Reduced set-up time due to large capacity of fertiliser hopper. 2,000 LITRES

Low pulling force, no lifting capacity needed ≥90HP

8 ROWS

Each seed hopper has a capacity of 60 litres

Optimised pivoting point for close headland turning 90°

40KM/H

Homologation for road transport

KVERNELAND OPTIMA

OPTIMA F

KVERNELAND OPTIMA

OPTIMA F

OPTIMA F HYDRAULIC FOLDING LARGE IN FIELD - NARROW ON THE ROAD The Optima F hydraulic folding frame is the right choice for larger farms and contractors. It can be fitted with HD-II or SX row units for large performance. The 6.00m Optima F is quickly folded to transport position. Thanks to the parallel hydraulic folding system, it is not necessary to empty each individual hopper before folding, which saves time.

The frame can be equipped with 8 rows for maize, 12 rows for the combined usage in sugar beet, maize, sunflowers or soya or with maximum 16 HD-II rows for narrow seeding of maize and rape seed.

The micro-granule applicators, micro-drill, are available as an option. For the application of fertiliser, the Optima F can be combined with the front hoppers f-drill or iXtra LiFe for liquid fertiliser or equipped with a central mounted hopper with a volumne of 1125l. The machine is fully ISOBUS compatible and ready for GEOCONTROL and GEOSEED.

•Clear design

Optima F Working width (m)

•Close centre of gravity

6 8

6 9

•Combination with mounted or front hoppers f-drill or iXtra LiFe as feriliser hopper

No. of rows

Row distance (cm)

70/75/80

45/50

37.5

HD-II row SX row

•GEOCONTROL and GEOSEED

e-drive II / GEOSEED Mounted fertiliser hopper (l) f-drill iXtra LiFe Microgranule applicator PUDAMA

(1125) *

(1125)

•Hydraulic frame ballasting kit

•Hydraulic fan drive

- *

•Close row sowing

GEOFORCE

* On demand

Possible

- Not available

KVERNELAND OPTIMA

• Compact and clear design

• Variable row width

• Integrated fertiliser system

• Optimised centre of gravity

KVERNELAND OPTIMA

OPTIMA V

MAXIMUM FLEXIBILITY

Optima V Working width (m) Number of rows

2.70 - 4.80 3.15 - 4.80 2.64 - 4.40

The Optima V is the perfect seed drill for farmers and contractors who need a machine with various row widths. The adjustment of the row width is done in next to no time which ensures a speedy response to changing requirements. The headstock is made of round tubes which saves weight and increases the stiffness. Plastic glide parts integrated within the main telescopic frame (160mm square tube) guarantee longterm usage of the machine. All inner rows are mounted on 8 maintenance free plastic rolls and are adjustable in different step widths.

6 + 1

(6r) 75+80 (7r) 45-65

Row width (cm)

45-80

33-55

HD-II row SX row e-drive II / GEOSEED Mounted fertiliser Filling auger f-drill iXtra LiFe Microgranule applicator GEOFORCE

•

Optima V is available with 6, 6+1 or 8 rows.

• Optima V with 6 rows allows the flexible adjustment of the row width e.g. for the sowing of sugarbeet at 45cm or for maize at 75/80cm. • Optima V with 6+1 rows offers additional option to work with either 6 or 7 rows at various row widths. • Optima V with 8 rows is ready for close row sowing for high yields. For more precise fertiliser application a half-switch-off is possible when two electro-hydraulic fertiliser drives are installed on each hopper side. More comfort is offered by the tool box to have all at hand, the foldable stairs with maintenance platform and an optional filling auger.

Possible

- Not available

Ready for GEOSEED .

Row width with different settings

Type

Rows

Transport

6 6 7 8

80cm 75cm 80cm 75cm

70cm

65cm

60cm

55cm

50cm

45cm

6+1 6+1

65cm 45cm

60cm 40cm

55cm

50cm 35cm

45cm

55cm 50cm

37.5cm

33cm

KVERNELAND OPTIMA

OPTIMA R

OPTIMA R - STRONG AND COST-EFFICIENT

STRAIGHTFORWARD

The rigid Optima R frame is the cost-efficient alternative for different farm sizes and complements the range of Optima RS models. The Optima R has no lengthwise transport device so is particularly suitable for farmers who do not need to cross public roads.

Simple and cost-efficient.

The Optima R allows universal seed application depending on the type of sowing unit and equipment fitted. Available in working widths from 3.0m to 6.0m, the Optima R can be set at row widths from narrow 35cm up to wide 80cm for maize respectively up to 150cm for pumpkins. Sowing of sunflowers, sugarbeets, rape or soya beans is also possible. All Optima R frames are available with mechanical or electric drive, thus, ready for GEOCONTROL and GEOSEED. Standard, Tandem, HD-II or SX rows can be chosen according to field and farm requirements. The Optima R can be combined with a large central fertiliser hopper which has a capacity of 1,000 l and can be driven mechanical or electro-hydraulic. The combination with a front hopper system is possible. The micro-granule applicator, micro-drill, or a filling auger is also available as an option.

Optima R Working width (m) Number of rows

3.0 3.5 4.0 4.5 5.0 6.0 2-8 3-8 3-8 3-8 4-8 5-8

HD-II row SX row

Standard row Tandem row e-drive II / GEOSEED Mechanical drive Mounted Fertiliser f-drill Microgranule applicator GEOFORCE

Possible

- Not available

KVERNELAND OPTIMA

IXTRA LIFE

• Precise fertilization and sowing saves costs for fertilizers and seeds • Environment protection in terms of resources and CO 2 -emissions • Fertilization and sowing in just one pass • All from one hand! One concept - front tank, electronics and seeding technology • Good ballasting and utilization

KVERNELAND OPTIMA

IXTRA LIFE

IXTRA LIFE FRONT TANK

This innovative ISOBUS combination ensures that seeds are sown at the right place and applies the correct amount of liquid fertiliser at the same time. For the best start of the crop, the liquid fertiliser is placed close to the seed. The iXtra LiFe front tank works in combination with the precision drill Optima to apply the fertiliser during seeding sugar beet, maize or sunflowers for example. The smart electronics on both seeder and front tank communicate so the application starts and stops together with each individual seed row. The iXtra LiFe provides liquid fertiliser close to the rows of the precision drill. With stricter fertilisation legislation an efficient nutrient application is key to reduce the total amount of fertiliser every year. Row fertilisation is a way to increase efficiency and save money due to a better placement of the fertiliser near the seeds. At the same time it creates space for additional application of organic fertilisers. The electric driven seeding elements in combination with GPS and GEOCONTROL automatically switch on or off in exactly the right place, ensuring that there is no overlap in the headland or in any row that has already been seeded. This is especially the case in triangular shaped fields and on curved or irregular shaped headlands. IN FRONT OF A GOOD START

Kverneland iXtra LiFe Sections

4 - 6 - 8 - 12 - 16 - 18

Nominal tank capacity (l) Maximum tank capacity (l) Clean water tank capacity (l)

1,100 1,300 2 x 65

The liquid fertiliser always follows the row unit which ensures perfect application and prevents double or missing spots.

Empty weight (kg)

221

Front linkage

Cat. II

Piston membrane pump (hy- draulic driven) (l/min)

200

Electrical level indicator Standard

Standard

Control panel

Electrical (ISOBUS)

KVERNELAND OPTIMA

F-DRILL

FRONT HOPPER F-DRILL

MAXIMUM FLEXIBILITY AND BALANCE The Kverneland front hopper f-drill as fertiliser hopper increase capacity and performance. The modular structure of the f-drill together with the Optima model ensure even weight distribution across the machine arrangement, giving the tractor maximum balance. This protects the soil structure, improves safety and manoeuvrability, whilst at the same time giving the driver an unrestricted view over the entire machine set-up. The range of Kverneland f-drill front hoppers are available in two sizes and each volume in two versions. The f-drill compact has a capacity of 1600 litres and the f-drill maxi up to 2200 litres. Both models are fitted with the electric driven metering device ELDOS. The standard version is equipped with one ELDOS metering unit. Higher application rates can be achieved with the duo version, as two ELDOS units distribute two times in total up to 600kg/ha. The wide opening of the hopper allows filling with a big bag or filling auger. A close-fitting 2-part hopper cover protects from dust and water and can easily be opened and closed. The sieves inside the hopper protect the ELDOS from stones and crush fertiliser clods. The positioning of all the major components is well-organised and clear. The hydraulic fan and the ELDOS metering device are located in front of the hopper for best access. A radar sensor records the speed in order to maintain the relevant distribution rate at the correct time. The hopper is fitted with an access platform, ideal for maintenance purposes and for the filling operation.

Model

Litre No. of ELDOS Application rate

f-drill compact

1,600 1,600 2,200 2,200

1 x 400kg/ha 2 x 300kg/ha 1 x 400kg/ha 2 x 300kg/ha

f-drill compact duo

f-drill maxi

f-drill maxi duo

KVERNELAND OPTIMA

F-DRILL

KVERNELAND OPTIMA

E-DRIVE II

OPTIMA E-DRIVE II

CONTROLLING AND STEERING FROM CAB

e-drive II Individual row start and stop function Variable seed rate per row Variable seed rate adjustment during sowing Two independent tramlining systems Opto-electronic control Section control Application maps

With e-drive II each sowing unit is driven individually via an electric motor. All the data is entered and read by an ISOBUS conform terminal like Tellus 1200 or Tellus 700. The sowing distances are infinitely adjustable on the move. All the sowing units can be switched off individually. This solution saves seeds and money!

In conjunction with close row sowing widths of 37.5cm or 45/50cm another benefit of e-drive II comes into play: Individual tramline control. Tramlines can be set up for every sprayer width and irrigation system. The e-drive II features complete electronic monitoring of all machine functions. This includes the seed monitoring by opto-electronic sensors as well as the steering of hydraulic functions such as the control of trackmarker arms and folding processes. Only the design of the seeding heart without a sealing enables the steering of all these functions without external power supply. All functions for every machine can be used without an extra generator or accumulator.

ISOBUS Standard.

KVERNELAND OPTIMA

PRECISION DRILL

Rape Kit Sowing rape with your precision drill enhances the range of application and improves the pay back of the machine costs. Results from various testing facilities have shown a high germination rate of precision-drilled rape, especially in difficult soil conditions. Thus each rape plant has best access to nutrients and water for high yields.

Channel Extra & Plantirium Sensor (HD-II) The Channel Extra is for shallow sowing of small seeds like sugarbeet and rape seed. Perfect placement is guaranteed by the special design of this falling channel. Curling or jumping of seeds in the seed furrow is prevented. The Plantirium sensor for seed detection from small like rape to larger seeds like beans or sunflowers. It automatically adapts to new seed type. An optical system counts the seeds, detect missing and doubles. The driver gets information in the terminal about the status of the working quality of each row. In addition a signal appears when the seed hopper is empty. In-field software updates are possible.

Intermediate Press wheel (HD-II) Kverneland’s intermediate press wheels provide the best seed-to-soil contact. This is especially necessary in dry conditions to get best access to capillary water. This is the most available form of water for plants to utilise because it is in the soil pore spaces or held loosely around soil particles. The cast iron version with rubber ring is designed for light to mid soil with less stones. The heavier stainless steel roller with scraper is used in heavy stony field conditions.

Equip your Optima according to your requirements.

KVERNELAND OPTIMA

• Perfect crop establishment systems

• For mulch or conventional sowing

• For all cultures from beans to rape

KVERNELAND OPTIMA

PRECISION DRILL

OPERATOR-FRIENDLYNESS

SIMPLE ADAPTATION AND ADJUSTMENT

Trash Wheel Seeding in different conditions extends the usage of your Optima. For conditions with a high amount of residues, the Optima can be equipped with trash wheels that remove straw and other residues in front of the sowing unit.

Coulter Pressure Adjustment With the pressure adjustment either mechanically from 0 to 100kg or hydraulically with spring loaded release system from -40kg as pressure release to 100kg the operator can individually adjust the coulter pressure of each row to any soil conditions: 0kg or -40kg in light and sandy soils, 100kg in heavy clay. This prevents bulldozing and ridge forming and ensures smooth running at an uniform sowing depth.

Double Disc Fertiliser Coulter The notches of the double disc fertiliser coulter give perfect traction in all soil conditions and allow perfect fertiliser placement. The overload protection ensures blockage-free operation especially in conditions with stones or with high amounts of residues. The integrated scrapers are useful for sticky soil.

Fertiliser placement 5cm below and beside of the placed seed

KVERNELAND OPTIMA

MICRO GRANULE APPLICATOR

ELECTRIC MICRO GRANULE APPLICATOR

MICRO-DRILL FOR OPTIMA HD-II AND SX

The demand for microgranule applicators is increasing. Micro nutrient and also small amounts of insecticides or fungicides ensure the best start for the crop. The Institute for Application Techniques in Plant Protection (JKI) is constantly working on technologies and procedures to enhance the safety of humans and nature in Germany, regarding plant protection. The aim of the Institute is to optimize the use of plant protection products and contribute to a sustained increase of plant production systems. The JKI has granted the approval for the Kverneland micro granule applicator, micro-drill, to comply with these standards. (Reference G 2196). The electric driven micro granule applicator micro-drill for the Optima HD-II and SX sowing units has been designed as backpack behind the sowing unit and offers a hopper capacity of 17 liters. It is electrically driven and ISOBUS controlled. The metering device consists of a wear-resistant plastic housing and exchangeable cell wheels made of stainless steel which ensure precise metering of the micro granules.

Operator saftety Increasing operator safety by easy and safe handling was focus during development. Therefore, the operator can exchange the cell wheels even when the hoppers are full of granule. There is no need to empty them first, reducing the operator’s risk of being in direct contact with the granules. A plus for the environment The granulate falls freely into the seed furrow without air support, minimising the emission of dust and complying with the current guidelines for emission control for any granulates applied. Precision Farming The comfortable, fully ISOBUS integrated control system allows the adaption of the stop and start points of the seed row. This ensures precise shutting on and off at the end of the field (without overlaps or faults) and in addition allows the switching off during tramline operation.

KVERNELAND OPTIMA

MICRO GRANULE APPLICATOR

Optima SX

Kverneland Micro granule applicator micro-drill Hopper capacity (Liter)

Minimum application rate (kg/ha) Maximum application rate (kg/ha)

2 (37.5 cm row width & 2km/h) 25 (80 cm row width & 18km/h)

Different cell wheels in 3mm, 6mm and 9mm width for Granule, Micro fertilizer and slug pellets

Cell wheels

Power requirement Electronic system Electronic standard

max. 3 A / 12 V

ISOBUS (GEOCONTROL of the sowing row)

AEF conform

Weight (without granule/ferilizer) (kg)

8.9

Optima HD-II

Optima Models

frames with HD-II e-drive II and SX rows

KVERNELAND OPTIMA

MICRO GRANULE APPLICATOR

KVERNELAND OPTIMA

MICRO GRANULE APPLICATOR

MICRO-DRILL OPTIMISED CROP CARE

Each micro granule applicator unit micro-drill is electrically powered by ISOBUS connection. An additional generator or other power sources are not required. The complete power supply and control is via ISOBUS. A calibration test is necessary to adjust the system to according granules or fertiliser. The system defines the correct cell wheel and setting quantity. WITH ELECTRIC DRIVE

The hopper has a capactiy of 17 liter. Comfortable is the low filling height. The filling level is visible from outside. The tank empties completely without any additional cleaning. The easy backwards slided hopper cover is prepared for using a sure-fill adpater. The electric driven metering device regulates the dosing process for different granules. The metering device developed in Kvernelands own plastic factory in Germany consists of a wear-resistant plastic housing. A motor drives the system via two gear wheels. The motor speed depends on the granulate volume and is steered by the ISOBUS system. The integrated shut-off valve enables a cell wheel change even if the hopper is full of granules or fertilizer.

With the adjustbale lever it is very easy to convert the system from calibration to work modus. Different cell wheels with large and small cell depths are made of stainless steel and suitable for different granules and applica- tions rates. Three exchangable cell wheels are ready to hand and stored well-protected in a box at the unit. The operational cell wheel is fixed in a car- tridge. Therefore will be no touch-contact with the granulate when exchanging the cell wheel. A well arranged sticker with a scale indicates the correct cell wheel at the cartridge.

KVERNELAND OPTIMA

CLOSE ROW SOWING

OPTIMUM CONDITIONS FOR GROWTH

Giving all plants the optimum growing conditions and same access to nutrients, water and sun is the basis for high yields.

With the sowing of maize, former harvesting processes had limited the standard row distance to 75cm. Due to the introduction of chopping and picking attachments which are independent of this former standard row width, close row sowing has become possible. This opened up for enhanced growth. Various tests have shown that with row distances between 30cm to 50cm yield increases by up to 10%. In fact, close row sowing at 37.5cm has turned out as the optimum setting for prosperous maize population.

Up to 10% higher yields.

37,5 cm

Close row spacing and defined seed placement by GEOSEED ensures optimum growth

KVERNELAND OPTIMA

CLOSE ROW SOWING

FROM 37.5CM

• From 37.5 to 50cm

• 2-D Placement with GEOSEED

• Optimum growing space

• Yield increase up to 10%

KVERNELAND OPTIMA

IM FARMING

GEOCONTROL

COST SAVING WITH PAYBACK

The more precisely and evenly a seed is sown, the easier it is to work and harvest, and the greater the possible yield.

iM CALCULATOR APP - free to download After filling in the required data, the calculator clearly shows what you can save in terms of money. With GPS it is possible to accurately seed, spread and spray without any overlap. The iM Calculator app calculates the cost saving by using those GPS functionalities. The amount of seeds saved depends on the size and shape of the field and may amount to more than 5%. The iM Calculator app for tablets is free to download from the App Store or Google Play. Please scan the QR code or find the online calculator on our homepage: http://imcalculator.kvernelandgroup.com/#/ Seeding with GPS and GEOCONTROL in combination with an Optima e-drive II is a major step towards precision and cost saving. These machines are all equipped with ISOBUS technology which, with the help of the Tellus 1200 terminal, can be easily controlled. Each electric driven seeding element, in combination with GPS and GEOCONTROL, is automatically switched on or off in exactly the right place, ensuring there is no overlap with any row that has already been sown. This is especially handy in triangular fields, on curved or irregular shaped headlands. You can also continue seeding at night since the switching on/off of the seed elements is completely reliable.

KVERNELAND OPTIMA

IM FARMING

GEOSEED

PATENTED 2-D SEED PLACEMENT

GEOSEED increases the yields of row crops and ensures maximum efficiency. Seeds are placed perfectly in line and in relation to each other.

GEOSEED is the precise synchronization of seed placement across the full working width of the machine. This ensures that seeds are distributed evenly, achieving an optimal pattern—either parallel or diamond-shaped—across the soil surface. The positive effects of this technology are far-reaching. By enhancing seed distribution, GEOSEED maximizes the efficient use of key resources such as nutrients, water, and sunlight, fostering optimal plant growth. Additionally, this uniform planting pattern helps reduce the risks of wind and water erosion, as the even distribution of plants improves soil structure and coverage, leading to better water retention and minimizing soil degradation.

• Increase in yield

• Best use of nutrients, water and sun

• Reduces the risk of water and wind erosion in hilly conditions

KVERNELAND OPTIMA

ISOBUS PRODUCTS

OPTIMA MODELS ARE FULLY ISOBUS COMPATIBLE

VARIABLE RATE FOR PRECISE ETABLISHMENT OF CROPS

Variable rate control with an Optima can be done via an application map, where in combination with GPS, the Optima automatically changes its seed rate based on a pre-determined amount. This can be done individually on each sowing row, which means that each sowing heart can manage different seed rates for a specific area.

7/m 2

8/m 2

9/m 2

7/m 2

9/m 2

7/m 2

9/m 2

7/m 2

9/m 2

6/m 2

7/m 2

6/m 2

9/m 2

6/m 2

9/m 2

6/m 2

9/m 2

6/m 2

9/m 2

6/m 2

9/m 2

6/m 2

8/m 2

6/m 2

9/m 2

Speed up on the path towards connected agriculture. We offer you numerous options and solutions for how to produce more with less; utilise inputs more efficiently and thereby increase profits and sustainability.

8/m 2

6/m 2

9/m 2

7/m 2

9/m 2

8/m 2

9/m 2

7/m 2

Example maize 60,000 to 90,000 seeds/ha depending on yield expectation and soil condition. Grid 5 x 5m.

KVERNELAND OPTIMA

ISOBUS PRODUCTS

Tellus 700 - Single Screen, Multiple Options Tellus 700 simplifies precision farming with smart features, custom mapping, and a user-friendly design. With ISOBUS compatibility and flexible packages, it boosts in-field efficiency and control.

Tellus 1200 - Multiple Screens, Even More Options Tellus 1200, the 12-inch universal Terminal offers intelligent hopper monitoring and precise variable rate application for fertiliser and seed. With an intuitive interface, multi-screen functionality, and GEOCONTROL compatibility, it delivers smart, all-in-one control beyond standard tractor systems.

The best overview in farm management IsoMatch FarmCentre is a cloud-based farm management tool that works seamlessly with Tellus 700 and Tellus 1200 terminals. It allows you to monitor machine activity, send tasks remotely to the terminal, and access real-time data and job reports - anytime, anywhere for smarter, more efficient farming.

Kverneland Sync – the Implement Gateway Always Connected – Easy and Direct

With Kverneland Sync, your implement stays connected to Kverneland online services, ensuring efficient, user-friendly data transfer to IsoMatch FarmCentre and Kverneland ServiceCentre.

GEOFENCING Protect your implement against theft with GEOFENCING and a backup battery, ensuring localization even when the implement is not connected to a tractor.

Task Management Enhance reporting and transparency with real-time tracking, performance measurement, and secure data storage in IsoMatch FarmCentre. Perfect for managing logistics and invoicing in machine cooperations.

Kverneland ServiceCentre Minimize downtime with remote diagnostics via Kverneland ServiceCentre, enabling technicians to quickly resolve electronic issues from a distance.

Kverneland Global 3 A precision GPS antenna delivering 30–50cm DGPS accuracy for guidance, section control, and advanced farming - boosting efficiency and minimising overlap.

KVERNELAND OPTIMA

Flexible in combination “We are contractors specialized in sowing and precision seeding located in Hoekse Waard, in the South of Rotterdam. For the precision seeding of maize, sweetcorn and pumpkins, we work with a Kverneland Optima 8 and 12 rows in combination with the iXtra LiFe front tank for liquid fertilizer application. The Kverneland Optima is equipped with the Terminal Tellus which we use also for our other Kverneland seed drills. The front tank and precision drill are both visible and monitored on one screen. Both implements are equipped with GEOCONTROL which individually shuts on/off the rows, ensures automatic section control on headlands and prevents overlapping in the field. Thanks to Kverneland technology, we, as contractors provide better use of the minerals in the root zone of the plants. This results in savings both on fertilisers and minerals and is thus environment-friendly. ” Arjan Breure, Contractor Breure Klaaswaal, Netherlands Main branch: sowing and precision seeding Optima for precision seeding: pumpkins, maize for silage and sweetcorn

KVERNELAND OPTIMA

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60