MICRO GRANULE APPLICATOR
MICRO-DRILL OPTIMISED CROP CARE
Each micro granule applicator unit micro-drill is electrically powered by ISOBUS connection. An additional generator or other power sources are not required. The complete power supply and control is via ISOBUS. A calibration test is necessary to adjust the system to according granules or fertiliser. The system defines the correct cell wheel and setting quantity. WITH ELECTRIC DRIVE
4
1
The hopper has a capactiy of 17 liter. Comfortable is the low filling height. The filling level is visible from outside. The tank empties completely without any additional cleaning. The easy backwards slided hopper cover is prepared for using a sure-fill adpater. The electric driven metering device regulates the dosing process for different granules. The metering device developed in Kvernelands own plastic factory in Germany consists of a wear-resistant plastic housing. A motor drives the system via two gear wheels. The motor speed depends on the granulate volume and is steered by the ISOBUS system. The integrated shut-off valve enables a cell wheel change even if the hopper is full of granules or fertilizer.
With the adjustbale lever it is very easy to convert the system from calibration to work modus. Different cell wheels with large and small cell depths are made of stainless steel and suitable for different granules and applica- tions rates. Three exchangable cell wheels are ready to hand and stored well-protected in a box at the unit. The operational cell wheel is fixed in a car- tridge. Therefore will be no touch-contact with the granulate when exchanging the cell wheel. A well arranged sticker with a scale indicates the correct cell wheel at the cartridge.
5
2
6
7
3
KVERNELAND OPTIMA
45
Powered by FlippingBook