Kverneland U-DRILL Universal seed drill

Brochure Kverneland U-DRILL Universal seed drill

U-DRILL UNIVERSAL SEED DRILL

Realising the full potential of farming is about growing and developing your business, not only your crop or livestock, but also your profit. Improve productivity and profitability by focusing on the positives and minimising disadvantageous aspects, through strong, dedicated management. Success springs from determination and clear targets, from laying down the appropriate strategy and allocating correct investments for the future. Quality results require the right ideas and equipment. When there is work to be done, you need the optimal setup and smart solutions that support you towards an easier, more profitable way of working. You need solutions that make tough and demanding conditions less complicated.

KVERNELAND U-DRILL

The iM Farming logo appears when the implement can be connected to our smart farming systems and accessories, essential for managing your business.

Effective sowing means speeding up when the soil is exactly right, in order to give your crop a head start. SOW

KVERNELAND U-DRILL

ARABLE TILLAGE SYSTEMS

YOUR KVERNELAND

INTELLIGENT FARMING SOLUTIONS

Choose the best farming solution for you and your land. Combine the highest possible yields with sustainability. This will start with the correct tillage. The choices you make depend on various factors and should match your specific circumstances, like soil structure, crop rotation, residue management, economic and ecological viabilities.

The choice is yours!

You must consider environmental and legal issues. From conventional methods to conservation tillage: the balance of operations at the right time has to be found to achieve high yields with the best soil condition (air, moisture, biological activity, etc.) with a minimum amount of energy, time and investment. For this, Kverneland offers a full range of intelligent farming solutions.

CONVENTIONAL TILLAGE

CONSERVATION TILLAGE

Conventional Tillage • Intensive method of cultivation

Mulch Tillage • Reduced intensity in terms of depth and frequency • More than 30% of residues are left on soil surface • Extended repose period of the soil • Cultivator and/or discs incorporate the crop residues within the top 10cm of soil for stable bearing soil • Full-width tillage - seedbed preparation and seeding in one pass • Protection against soil erosion; reduce soil loss by run-off and improve water storage capacity. • Improvement of soil moisture retention

Strip Tillage • Zonal strip loosening before or during seeding of up to 1/3 of the row width (Loibl, 2006). Up to 70% of the soil surface remains untouched • Strip-till combines the soil drying and warming benefits of conventional tillage with the soil-protecting advantages of no-till by disturbing only the area of the soil where the seeds are placed • Exact fertilising deposit • Soil protection against erosion and drought

Vertical Tillage / No-Till • Extensive method • Working soil vertically avoids additional horizontal layers or density changes • Increasing water infiltration, root development and nutrient take-up • Plants’ roots dictate the overall health of the plant, as they deliver nutrients and water throughout the season, contributing to a higher yield • A strong set of roots makes plants more

• Complete soil inversion e.g. by a plough • Less than 15-30% crop residues left on soil surface • Seedbed preparation done by an active tool or special seedbed harrow • High phytosanitary effect by reduced pressure of weed and fungi diseases - fewer herbicides and fungicides needed • Better dry-off and faster increase of soil temperature for better nutrients absorbation

resistant to wind and drought. • Lower energy input required

KVERNELAND U-DRILL

FLEXIBILITY

SPEED

EFFICIENCY

PLACEMENT

KVERNELAND U-DRILL

EFFECTIVE SOWING

TO GIVE YOUR CROP A HEAD START

Speed When the time is right, you want to drill immediately. Only one day is the best. Tomorrow conditions may be worse. Speed is important. You need a machine that has the right capacity to finish the job in time. Flexibility You want your machine to be flexible. Each field has its own soil structure and specific working conditions. So you need a seed drill that is easy to adjust, preferably from the tractor cab. You don’t want to lose valuable time.

Efficiency This seed drill has been designed with the lowest weight possible and requires relatively low pulling force. The u-drill offers high performance and operator convenience, to achieve consistently good results - even at high speeds. Placement You want to rely on perfect execution: levelling the soil, preparing the seedbed, re-compacting, placing the seeds accurately and smooth closing in one single pass. The Kverneland u-drill universal seed drill combines capacity, easy adjustment and a perfect seed placement.

The highest possible efficiency in sowing.

KVERNELAND U-DRILL

OVERVIEW

5 STEPS IN ONE SINGLE PASS

With its modular design, the u-drill combines proven Kverneland components. Perfect preparation, levelling and recompaction of the seedbed, placing and pressing the seeds is done in one single pass.

Saving time and money.

Levelling the soil For the best possible preparation, the front tyre packer levels the soil, crushes large clods and thus paves the way for the optimum depth control of the following tools. The front tyre packer has a diameter of 800mm and can be lifted hydraulically when it is not needed. Preparing the seedbed Either two rows of conical disc like from a short disc harrow create the seedbed over the entire working width or waved straight minimum disturbance MD disc prepare a mini-seedbed only stripewise in front of the CD coulter. The MD discs are ideal to work after cover crops but also in pre-cultivated soil. Due to the hydraulic system, the disc harrow and MD disc section can be adjusted with continuous variability from the tractor cab.

Consolidation before sowing The loosened soil is consolidated by large tyre packers. Perfect depth control of the coulters and an optimum seed-to- soil contact ensure an excellent capillary action. The large tyre diameter of 900mm significantly reduces the required tractive power. Sowing at uniform depth The heart of the machine is its coulters. The narrow profile of the coulters with their slightly offset steel discs allows easy penetration into the soil. Nearly all the coulter pressure (as much as 100kg) can be used on the integrated press wheels. The result: uniform seeding depth even at high working speeds.

Covering the seeds Harrowing the soil completes the seeding. S-shaped or finger harrows ensure an optimum covering of the seeds. The working intensity can be set by the stepless pressure adjustment and at three different angles. To prevent damage to the harrow when reversing, it is equipped with an effective reversing device.

KVERNELAND U-DRILL

OVERVIEW

Kverneland u-drill

METERING DEVICE ELDOS

PRECISE SEED METERING WITH ELDOS

AUTOMATIC AND SAFE

ELDOS is the electric driven metering device for Kverneland pneumatic seed drills. It is state-of-the-art technology for perfect seed placement.

ELDOS is steered by Kverneland e-com software, which is fully ISOBUS compatible . By the automatic section control, GEOCONTROL, the metering device stopps/starts automatically. Double and/or missed seeding on headlands or odd-shaped fields is avoided. Special sensors ensure complete functionality from the tractor cab. Calibration is automatic, and a range of interchangeable seed metering rotors can be swapped - even when the hopper is full - without the need for tools. Sensors monitor the metering rotors, and give a warning if the wrong metering rotors are accidentally installed.

Kverneland Tellus 1200 the ISOBUS terminal with up to four fully

customizable touch screens.

Good results of seed rate variation across the drill.

According to the test from magazine Profi, the coefficients of variation of seed rate across the drill (i.e. the spread around the average) were 2.7% for wheat, 3.3% for grass and 3.7% for OSR.

Seed rate is pretty consistent across the width of the drill, showing maximum errors of 12% (OSR), 7% (wheat) and 7% (grass). Graph: ST. Source: Magazine Profi

The ELDOS device of the pressurized system of the u-drill plus is better sealed but operates in the same way.

KVERNELAND U-DRILL

METERING DEVICE ELDOS

SHUT-OFF VALVE

•Easy exchange of rotors

• Five rotors for all sorts of seeds and fertiliser

•Self-monitoring system

•Application rates from 1-400kg/ha (depending on working width and speed)

•Simple and automatic calibration

KVERNELAND U-DRILL

40 : 60

Division of hopper capacity u-drill plus is 40 : 60

High capacity, high speed: application rates up to 400kg/ha depending on working width and speed. 400kg/ha

12%

Up to 12% yield increase with precision fertilisation.

KVERNELAND U-DRILL

U-DRILL AND U-DRILL PLUS

u-drill AND u-drill plus

HIGH SPEED AND MAXIMUM PERFORMANCE

Powerful and efficient performance - that is what the u-drill offers. The machine can operate at high forward speeds of up to 18km/h, whilst maintaining a consistent working depth. The seeding depth and the coulter pressure can be centrally controlled by the push of a button from the tractor. The u-drill is quickly set up for operation: All important settings can be controlled from the in-cab display , starting from the simple calibration up to any adjustments in field. Being adjustable on the go as to seeding depth, coulter pressure and automatic headland managment, the u-drill offers operator comfort and safe application.

A plus for the combined application.

The u-drill is available either as standard drill (u-drill) or as grain and fertiliser version, u-drill plus. Both versions have a lightweight, yet robust structure, allowing the deployment of the u-drill on all kinds of sites. They come in working widths of 3.0, 4.0 and 6.0m. Depending on the working width, the hopper capacity is either 3,000l (3.0m and 4.0m) or 4,350l (6.0m u-drill) and 4,200l (6.0m u-drill plus).

The hopper of the u-drill plus is divided lengthwise. The proportion is 40 : 60. The two metering devices are accordingly positioned on either side.

The hopper of the u-drill plus 6001 version is diveded in front and rear.

KVERNELAND U-DRILL

U-DRILL PLUS

FERTILISER PLACEMENT

IN OR BETWEEN THE ROWS

The u-drill plus has been designed for precise fertiliser placement during sowing. It is able to apply fertiliser rates up to 400kg/ha (depending on speed and width). The pressurised hopper system of the 6.0m version ensures these rates are maintained even under the most difficult conditions. The hydraulic fan drive is powered from the tractor hydraulics. 1. Fertiliser placement within the conical disc harrow section The outlets within the second row of the disc harrow section apply the fertiliser exactly in between two seeding rows. All plants have exactly the same access to the incorporated fertiliser deposit. By adjusting the working depth of the disc harrow, the depth of the fertiliser placement is determined. 2. Fertiliser application within the seeding row The fertiliser application within the seeding row is done by the double-entry CD-coulter. The fertiliser is placed together with the seeds. This is especially suitable for phosphoric fertiliser to support the initial germination and development of the plants in the most efficient way. The special design of the double-entry coulter with two exits also allows the seeding of two different crops in just one working pass.

No. of metering devices ELDOS

Model

Application rate

u-drill 3001/4001/6001 u-drill plus 3001/4001

1/1/2

32kg/min/ELDOS 45kg/min/ELDOS 65kg/min/ELDOS

2/2

u-drill plus 6001

Up to 12% increase in yield.

In trials of spring sown crops, yields have shown increases up to 12% compared to crops where the fertiliser (here: NPK) has been applied by other methods. (Source: Landsforsøgene 2012, DK)

KVERNELAND U-DRILL

U-DRILL PLUS

PLACEMENT WITH DISC HARROW & CD COULTER (2 DISTRIBUTION HEADS)

PLACEMENT WITH CD DOUBLE-ENTRY COULTER (2 DISTRIBUTION HEADS)

1 ST POSSIBILITY: FERTILISER PLACED BETWEEN THE ROWS

1 ST POSSIBILITY: FERTILISER PLACED IN THE SEEDING ROW

FERTILISER SEED

The fertiliser is placed in-between the seed rows, the depth of the fertiliser is determined by the disc harrow.

SEED

FERTILISER

SEED

FERTILISER

SEED

With the CD double- entry coulter the fertiliser is placed in the seeding row.

12.5cm / 16.7cm

12.5cm

12.5cm 25cm

2 ND POSSIBILITY: 2 SORTS OF SEEDS IN THE SEEDING ROW

2 ND POSSIBILITY: 2 SORTS OF SEEDS AT 2 DIFFERENT SEEDING DEPTHS

With the CD double- entry coulter two sorts of seeds are placed in the same seeding row.

The disc harrow outlets place e.g. the beans in-between the rape seeds.

RAPE

BEAN

RAPE

BEAN

RAPE

12.5cm 25cm

12.5cm / 16.7cm

12.5cm

PLACEMENT EITHER WITH CD DOUBLE-ENTRY COULTER OR DISC HARROW & COULTER (3 DISTRIBUTION HEADS)

2 ND POSSIBILITY: 2ND PRODUCT PLACED BETWEEN THE ROWS

1 ST POSSIBILITY: 2ND PRODUCT PLACED IN THE SEEDING ROW

The disc harrow outlets place e.g. the beans in-between the rape seeds every 25cm. The depth is determined by the disc harrow.

FERTILISER SEED

With the CD double- entry coulter fertiliser and seed is placed in the seeding row on different sowing depths.

RAPE

BEAN

12.5cm

12.5cm 25cm

KVERNELAND U-DRILL

12 times longer lifetime Fully integrated maintenance-free disc bearings provide an easy flow, thanks to durable bushes, exclusively designed for Kverneland. Self-cleaning press wheels The press wheels (Ø 380mm) are made of special rubber with a self-cleaning effect. Centrally steered seed depth The seed depth adjustment is steered centrally via the ISOBUS terminal. Just one sort of coulter Clear overview and simplified maintenance.

KVERNELAND U-DRILL

CD COULTER

Force (kg)

FOR PERFECT SEED PLACEMENT

Angle °

8°

10°

12°

Competitor II

KVERNELAND

Competitor I

Lower fuel consumption with narrow profile of CD coulter The CD coulter of the u-drill has an extremely narrow profile design, with an angle of only 8° . There is a clear relation between the angle of the seed cutting disc and power requirement: the smallest angle requires less power and less fuel.

Thanks to the very slim design of the CD coulter , there is only a small amount of soil being moved. Therefore you need less pressure to achieve the right seeding depth. Thus, more of the available coulter pressure can be led to the press wheels. The result is a very even seed application.

Up to 25% less penetration force needed.

KVERNELAND U-DRILL

ROW SPACING

TWO SEED ROW SPACINGS

12.5 OR 16.7CM

The distance of the sowing rows is often philosophy. Each farmer has to decide by himself and has to consider local yield potential and the harvest utilisation of the crop. With our Kverneland proven CD-coulter both spacings are possible due to the narrow profile design.

A distance of 12.5cm offers for high seed rate the best distribution of seeds in the field because rows are quickly closed, weed pressure is reduced and a good use of nutrients, water and sun is achieved.

You have the choice!

The wider distance of 16.7cm has the advantage that the microclimate of the standing crop is better against fungal infestation. New type of seeds (Hybrid) achieve higher yields per spike Therefore, less seeds are needed per m 2 . This is important on fields where water is a limited factor. In addition, less coulters per metre reduce the pulling force requirement and have a better clearance especially in wet conditions. Sowing with MD discs for seedbed preparation is only possible with a seed row spacing of 16.7cm.

KVERNELAND U-DRILL

With MD disc 16.7CM

KVERNELAND U-DRILL

SEEDBED PREPARATION

PROFESSIONAL SOIL PREPARATION

FOR A PERFECT SEEDBED AND MAXIMUM GROWTH

Front wheel packer – larger footprint reduces compaction For a perfect result in all seeding conditions, Kverneland recommends the fully equipped u-drill with front tyre packer in order to distribute the load on a larger tyre surface. As a result the contact pressure and the rolling resistance decreases and less power gets lost in soil compaction. Furthermore, due to the improved tire-ground toothing, the soil can support higher driving forces. Disc harrow or MD disc The disc harrow section consists of two rows of aggressively pitched conical discs. The discs are 5mm thick and hardened for long life. Thanks to their conical shape, the cutting angle remains constant. The high rotation speed ensures an excellent cutting quality over the entire working width. The disc harrow section is available with row spacings of either 12.5 cm or 16.7 cm. The MD disc section consists of two rows of straight waved discs. The MD disc have been designed for vertical penetration through the flutes. The blade keeps turning, penetrating and cutting even in the most challenging conditions. A seedbed is created only in strips of 3 to 5 cm in width, in which the seed is placed by the CD coulter. The MD disc option is only available for machines with 16.7 cm row distance. Offset wheel packer For perfect depth control of the coulters, an optimum seed-to-soil contact and excellent capillary action, the loosened soil is re-compacted by a large tyre packer. The large tyre diameter of 900mm together with the off-set position significantly reduces the tractive power required by the machine and thus ensures a consistently good work result.

Less traction needed.

KVERNELAND U-DRILL

MD DISC

The ground is worked vertically with straight blades, only in a 30-50mm strip of soil. Residue is cut and moved to the side. 30-50MM

• Low disturbance seeding especially in high residue and cover crop systems. • Minimal movement of soil between rows for improved grass weed control. • Ability to work in pre-cultivated , ploughed and no till systems where soil structure allows. • Low hp requirement and capability to work in late season seeding conditions. • Zonal cultivation allows consistent, accurate seed placement with the proven CD coulter .

KVERNELAND U-DRILL

MD DISC

MINIMAL SOIL DISTURBANCE

CREATING THE IDEAL STRIPE OF SEEDBED

The u-drill with MD disc is an excellent choice with the requirement for minimal disturbance and/or cutting through and seeding into high volumes of residue. the MD disc unit is ideal for use in cover crop rotations. The crop is laid down by the wheel packers of the u-drill for improved decomposition and reduced emergence of grass weeds that are yet to germinate. The MD disc design (Ø 430mm) allows the fluted blade to clear the residue vertically, providing improved cutting and penetration. This reduces the risk of ‘hairpinning’ where the residue is pushed into the seed slot preventing the seed from having good soil contact, resulting in poor germination and establishment. The soil between each MD disc is not disturbed allowing improved weed germination control and ability to seed into cover crops. Each MD disc is in line with the following CD coulter, creating a mini seedbed in a 30-50mm strip of soil where the seeds will be placed. This provides every row with equal growing conditions. The MD disc is protected by a rubber shock system and mounted individually with maintenance-free double ball bearings which are exclusively developed for extreme soil conditions. A maxium working depth of 100mm is possible.

A mini-seedbed of 3-5cm

Oats sown in cover crop mid of March

Clean cut with less soil movement

Flutes enter the soil perpendicular to the ground for maximum cutting performance while requiring less down pressure. The same flutes exit the soil parallel to the ground for a controlled soil release. The clearing and cutting of the crop residue and soil aggregates within the zonal seeding profile ensures the ideal environment for residue decomposition and subsequent seeding zone for the CD coulter. The MD disc have been designed for vertical penetration through the flutes. The blade keeps turning, penetrating and cutting even in the most challenging conditions. The MD discs offer excellent slicing to reduce hairpinning at all speeds, ranging from 7 to 15 km/h. The wavy profile and angle of the discs create a finely tilled strip directly in front of the CD seed coulter. With the MD disc, a sowing distance of 16.7cm is possible.

Oats emergence beginning of May

KVERNELAND U-DRILL

•Special heat treated disc of 55-58HRC (215 kg/mm²) for long durability •Long lifetime. A Kverneland disc is one of the hardest disc in the market! • Softer center for flexibility against obstacles •Always optimal soil results due to lateral adjustment despite of wear

58HRC

56HRC

55HRC

47HRC

51HRC

53HRC

KVERNELAND U-DRILL

DISC HARROW

CONICAL DISC: IMPECCABLE FULL CUTTING QUALITY EXCELLENT PENETRATION

Conical notched discs (⌀ 460mm) Due to the conical design of the disc, the attack angle is always fixed and the cutting angle always stays in the same position. Curved discs transport more soil and improve the mixing effect.

20% longer lifetime than a standard disc.

The discs of the first row ensure good penetration and prevent blockages. The second disc row is working offset and takes over the soil flow and plant residues of the first row. Optional star discs on each side instead of a discs moderate and regulates the soil flow to the sides.

Notched discs work more aggressively, the penetration, self-rotation and self-cleaning is improved. The notches maintain the very good cutting quality.

The side deflectors keep the soil flow in the working zone and avoid dams.

KVERNELAND U-DRILL

HEADLAND MANAGEMENT

FOR UTMOST PRODUCTIVITY

The u-drill comes with a fully automated headland management system. This saves the driver lots of time and eases the operation.

Extremely operator-friendly.

Using just one button, the u-drill operator can initiate a headland sequence with wheels, discs and coulter bar all capable of automatic operation in timed stages. The lifting sequence starting with the disc section ensures a constant depth control until the headland. As the headland sequence starts, the metering device stops automatically - avoiding double seeding. The seed hoses are empty at the headland. This saves up to 5% of seed. The driver can concentrate on steering the machine and the correct operation. In addition, double and/or missed seeding is prevented. With headland management the job can be done more quickly, precisely and efficiently. The drill requires only one double-acting spool to operate.

Feature

u-drill

Competitor I

Competitor II

in cab depth control disc harrow/MD disc unit in cab depth control seeding depth

- - -

in cab coulter pressure adjustment

- -

Headland Management

KVERNELAND U-DRILL

HEADLAND MANAGEMENT

5% No double seeding on headlands saves up to 5% of seeds

KVERNELAND U-DRILL

U-DRILL AND U-DRILL PLUS

iM CALCULATOR APP

FREE TO DOWNLOAD

With GPS it is possible for the farmer to accurately seed, spread and spray without any overlap. The iM Calculator app calculates the cost saving by using those GPS functionalities .

Save seeds and money!

After filling in the required data, the calculator clearly shows what you can save in terms of money.

The amount of seeds saved depends on the size and shape of the field and may amount to more than 5%.

The iM Calculator app for tablets is free to download from the App Store or Google Play.

Please find the online calculator on our homepage: http://imcalculator.kvernelandgroup.com/#/

KVERNELAND U-DRILL

Impressed by low pulling force and per- fect seed placement "I had two Optima precision seeders when I wanted to buy a new seed drill. As I was very satisfied with my Optima, the Kverneland u-drill was the first choice to look at. I’m a mechanical engineer, so I checked the machine thoroughly from the technical point of view. That was so convincing that I tried a demo machine in my field. After the first 10 hectares I decided that this machine is what I was looking for. I was impressed by the low pulling force and the seed placement. That was the reason I did not let this machine go. I bought it right away and I am still happy." Szűcs Zoltán, Hungary 1,200 ha, Crops: Corn, hybrid corn, wheat, phacelia, poppy, Climate: Continental

KVERNELAND U-DRILL

ISOBUS PRODUCTS

U-DRILL`S ARE WITH E-COM FULLY ISOBUS COMPATIBLE VARIABLE RATE FOR EVEN ETABLISHMENT OF CROPS

Variable rate control with an u-drill can be done via an application map, where in combination with GPS, the u-drill automatically changes its seed rate based on a pre-determined amount. The software, working alongside the electrically driven metering device ELDOS, controls and adjusts seed rates for specific areas efficiently. When most of the seeder is within a specific zone defined by the application map, the seed rate for that zone is applied.

320/m 2

280/m 2

320/m 2

280/m 2

350/m 2

280/m 2

8/m 2

Speed up on the path towards connected agriculture. We offer you numerous options and solutions for how to produce more with less; utilise inputs more efficiently and thereby increase profits and sustainability.

280/m 2

300/m 2

320/m 2

Example: wheat seeds/ha depending on yield expectation and soil condition. Grid 10x10m

KVERNELAND U-DRILL

ISOBUS PRODUCTS

Tellus 700 - Single Screen, Multiple Options Tellus 700 simplifies precision farming with smart features, custom mapping, and a user-friendly design. With ISOBUS compatibility and flexible packages, it boosts in-field efficiency and control.

Tellus 1200 - Multiple Screens, Even More Options Tellus 1200, the 12-inch universal Terminal offers intelligent hopper monitoring and precise variable rate application for fertiliser and seed. With an intuitive interface, multi-screen functionality, and GEOCONTROL compatibility, it delivers smart, all-in-one control beyond standard tractor systems.

The best overview in farm management IsoMatch FarmCentre is a cloud-based farm management tool that works seamlessly with Tellus 700 and Tellus 1200 terminals. It allows you to monitor machine activity, send tasks remotely to the terminal, and access real-time data and job reports - anytime, anywhere for smarter, more efficient farming.

Kverneland Sync – the Implement Gateway Always Connected – Easy and Direct

With Kverneland Sync, your implement stays connected to Kverneland online services, ensuring efficient, user-friendly data transfer to IsoMatch FarmCentre and Kverneland ServiceCentre.

GEOFENCING Protect your implement against theft with GEOFENCING and a backup battery, ensuring localization even when the implement is not connected to a tractor.

Task Management Enhance reporting and transparency with real-time tracking, performance measurement, and secure data storage in IsoMatch FarmCentre. Perfect for managing logistics and invoicing in machine cooperations.

Kverneland ServiceCentre Minimize downtime with remote diagnostics via Kverneland ServiceCentre, enabling technicians to quickly resolve electronic issues from a distance.

Kverneland Global 3 A precision GPS antenna delivering 30–50cm DGPS accuracy for guidance, section control, and advanced farming - boosting efficiency and minimising overlap.

KVERNELAND U-DRILL

PARTS & SERVICE

ORIGINAL PARTS & SERVICE

LET’S FOCUS ON YOUR BUSINESS

KVERNELAND U-DRILL

PARTS & SERVICE

MYKVERNELAND

SMARTER FARMING ON THE GO

A personalised online platform tailored to your machine needs With MYKVERNELAND you will benefit from easy access to Kverneland’s online service tools. First hand access to information on future developments and updates, Operator and spare parts manuals, FAQs and local VIP offers. All info gathered in one place.

KVERNELAND U-DRILL

TECHNICAL DATA

Model u-drill / u-drill plus

3001

4001

6001

Working width (m) - frame version

3.0 rigid

4.0 rigid

4.0 fold

6.0 fold

Transport width (m)

3.0

4.0

3.0

No. of metering devices u-drill / u-drill plus Hopper capacity (I) u-drill / u-drill plus

1 / 2

2 / 2

3,000

4,350 / 4,200 pressured

Required oil volume

> 90l/min

Single-acting hydraulic valve + zero-pressure return for fan drive 1 x double-acting hydraulic valve for machine control Power requirement 12 V > 70 A No of CD double disc coulters (16.7/12.5cm)

(18/24)

(24/32)

(36/48)

CD double entry seed outlet u-drill / u-drill plus

- /

Coulter pressure up to 100kg Electro-hydraulic adjustment of the seed placement depth via ISOBUS terminal Press wheels (Ø 380 x 50mm) Row spacing

12.5cm or 16.7cm

Coulter staggering (17.5cm) Electronic adjustment of the seed quantity with radar Filling level sensors in the seed hopper (no. u-drill/u-drill plus)

(1)

(1/2)

(2)

Fan speed sensor Metering device monitoring Electronic half-width shut-off

Mid-mounted front packer (Ø 800mm) Complete front packer (Ø 800mm)

Electro-hydraulic adjustment of the disc harrow depth via ISOBUS terminal Disc harrow (Ø 460mm) Disc harrow (Ø 460mm) with application tube u-drill / u-drill plus

- /

MD disc (Ø 430mm) 16.7cm seed distance Offset tyre packer (Ø 900mm) Maintenance platform, road transport lights, in-hopper light Hydraulic fan drive

Lower link suspension Cat. 3N (825mm) Lower link suspension Cat. 3 (965mm) Lower link suspension Cat. 4 (965mm)

KVERNELAND U-DRILL

TECHNICAL DATA

Model u-drill / u-drill plus

3001

4001

6001

Working width (m) - frame version Hydr. Clod board S-shaped seed harrow 10mm Finger harrow 12mm Calibration set Filling auger u-drill / u-drill plus

3.0 rigid

4.0 rigid

4.0 fold

6.0 fold

/ -

Hydraulical folding track marker with notched discs Track eradicators (2 tines per track) Pneumatic brakes Hydraulic brakes Extended drawbar for tractors with twin tires up to 4.5m Pre-emergence marker (centre marking)

Soil flow harrow LED work lights Tellus 1200 /Tellus 700 for non-ISOBUS-capable tractors Tellus 1200 / Tellus 700 for ISOBUS tractors Hopper volume weighing system with separate monitor Headland management Seed flow sensor Weight (kg) (with front packer + track eradicators) u-drill / u-drill plus

4,600 /4800

5,400 / 5,600

5,600 / 5,800

8,120 / 8,400

Min. power requirement (HP)

120

150

190

Standard equipment Option

- Not available

Rotor 1 for high rate cereals

Rotor 2 for grass or similar

Rotor 3 for rape and small seeds

Rotor 4 for low rate cereals

Rotor 5 for maize, sunflowers and greening seeds

Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute basis for any legal claim against Kverneland Group. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group reserves the right at any time to make changes to the design or specifications shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary, e.g. for maintenance purposes, please contact proper assistance or supervision of a technical assistant. © Kverneland Group Soest GmbH

KVERNELAND U-DRILL

KVERNELAND u-drill 07.2026

kverneland.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36