Leaflet e-drill range

e-drill CULTIVATOR-MOUNTED PNEUMATIC SEED DRILL

WHEN FARMING

MEANS BUSINESS

Realising the full potential of farming is about growing and developing your business, not only your crop or livestock, but also your profit. Improve productivity and profitability by focusing on the positives and minimising disadvantageous aspects, through strong, dedicated management. Success springs from determination and clear targets, from laying down the appropriate strategy and allocating correct investments for the future. Quality results require the right ideas and equipment. When there is work to be done, you need the optimal setup and smart solutions that support you towards an easier, more profitable way of working. You need solutions that make tough and demanding conditions less complicated.

KVERNELAND E-DRILL

Effective sowing means speeding up when the soil is exactly right, in order to give your crop a head start. SOW

The iM Farming logo appears when the implement can be connected to our smart farming systems and accessories, essential for managing your business.

KVERNELAND E-DRILL

ARABLE TILLAGE SYSTEMS

YOUR KVERNELAND

INTELLIGENT FARMING SOLUTIONS

Choose the best farming solution for you and your land. Combine the highest possible yields with sustainability. This will start with the correct tillage. The choices you make depend on various factors and should match your specific circumstances, like soil structure, crop rotation, residue management, economic and ecological viabilities.

The choice is yours!

You must consider environmental and legal issues. From conventional methods to conservation tillage: the balance of operations at the right time has to be found to achieve high yields with the best soil condition (air, moisture, biological activity, etc.) with a minimum amount of energy, time and investment. For this, Kverneland offers a full range of intelligent farming solutions.

CONVENTIONAL TILLAGE

CONSERVATION TILLAGE

Conventional Tillage • Intensive method of cultivation

Mulch Tillage • Reduced intensity in terms of depth and frequency • More than 30% of residues are left on soil surface • Extended repose period of the soil • Cultivator and/or discs incorporate the crop residues within the top 10cm of soil for stable bearing soil • Full-width tillage - seedbed preparation and seeding in one pass • Protection against soil erosion; reduce soil loss by run-off and improve water storage capacity. • Improvement of soil moisture retention

Strip Tillage • Zonal strip loosening before or during seeding of up to 1/3 of the row width (Loibl, 2006). Up to 70% of the soil surface remains untouched • Strip-till combines the soil drying and warming benefits of conventional tillage with the soil-protecting advantages of no-till by disturbing only the area of the soil where the seeds are placed • Exact fertilising deposit • Soil protection against erosion and drought

Vertical Tillage / No-Till • Extensive method • Working soil vertically avoids additional horizontal layers or density changes • Increasing water infiltration, root development and nutrient take-up • Plants’ roots dictate the overall health of the plant, as they deliver nutrients and water throughout the season, contributing to a higher yield • A strong set of roots make plants more

• Complete soil inversion e.g. by a plough • Less than 15-30% crop residues left on soil surface • Seedbed preparation done by an active tool or special seedbed harrow • High phytosanitary effect by reduced pressure of weed and fungi diseases - fewer herbicides and fungicides needed • Better dry-off and faster increase of soil temperature for better nutrients absorbation

resistant to wind and drought. • Lower energy input required

KVERNELAND E-DRILL

EFFICIENT

PERFORMANCE

EASY

PLACEMENT

INTELLIGENT

KVERNELAND E-DRILL

EFFECTIVE SOWING

FOR BEST GERMINATION

Performance Seeding at the right moment is one of the critical decisions you have to take as an arable farmer. And the soil needs to be prepared with care. Seed bed preparation and seeding in one pass with the cultivator-mounted e-drill relieves this pressure. Efficient You invest in the best equipment for seeding. In return you want the best results and low cost of operation. The Kverneland seeders have been developed with a close centre of gravity. Less horse power needed means saving on fuel costs and reduction of compaction. Intelligent You want a seed drill that is easy to calibrate, steer and monitor. You can rely on the Kverneland ISOBUS systems – and concentrate on your business.

Easy Soil structure is not the same on every field, neither are working conditions. For best results you want to adjust the tine depth of the power harrow and the sowing depth independently from each other. Centrally – to be efficient, as with the e-drill. Placement Once you have configured your machine, you want to rely on a perfect execution. The e-drill with CX-II coulter is excellent in precision placement of the seed. Not too deep, not too shallow. So it will germinate perfectly, to grow into a great crop.

In short, it’s effective

KVERNELAND E-DRILL

PERFECT SOWING

STRATEGIC THINKING IS ESSENTIAL "The harvest is only as good as the seeding", this saying reflects that a good start is crucial for success. Thorough careful soil preparation, precise sowing and well-coordinated plant protection strategies form the basis for high yields, environmental responsibility and sustainable profitability.

Fertilising and Crop Care The "Law of the Minimum" described by Liebig is important but also the timing of nutrients availability. In order to improve a good germination and development of the young plant an application already with the sowing at the right place in one pass can be beneficial. The crop care should be as less and as precise as possible. Crop rotation/Biodiversity To optimize nutrients in the soil, and combat pest and weed pressure a wider crop rotation is one factor to consider. Crops should be rotated on at least a three to four year cycle. Crop rotation practices can result in increased soil carbon content through high crop cover periods, reduced frequency and tillage intensity, humus formation and a higher biodiversity. Crop rotation is of great benefit to both farmers and the environment.

Sowing time The time of sowing varies from type of seeds, location, soil and weather conditions and based finally on the experience of the farmer. Risk may include fungicide infection, a higher weed pressure, water availability, temperature, hours of sunshine, higher amount of seeds and a shorter growing season. Finally, it is important to establisch a strong and competitive crop population. Soil preparation, structure and fertility Target is a weatherproof seedbed to avoid erosion or capping effects after rain falls. Reduced passes and wheeling and less soil disturbance plus a good seed- to-soil contact receive a strong root development, an optimal nutrient supply competitiveness against weeds. Humus, a key factor, increases the biological activity of soil life and has a favourable influence on the pore distribution of the soil and binding of CO 2 . This improves air circulation, heat balance and water storage capacity.

Sowing rate and row spacing Unfavourable soil and tillage conditions increase the seed rate at the respective sowing date. The sowing rate calculation table (kg/ha) takes into account all significant influencing and "loss factors" for the required sowing rate. Individually, it depends on location (weed type, weed resistant, moisture etc.), type of crop and sowing technology (coulter type, spacing etc.). Knowledge of these influencing factors enables an adapted seed rate calculation. The row spacing has an important influence on both seeding technology (staggered coulter or in one line) and the weed control technology (mechanical, chemical, thermical or all in combination). Sowing depth The sowing depth depends on crop and soil condition. The higher the soil moisture or the amount of precipitation, the shallower the sowing depth can be chosen. Important is the achievement to get access to capillary water.

KVERNELAND E-DRILL

OVERVIEW

AT A GLANCE

ONE PASS POWER HARROW SEED DRILL COMBINATION

The machine’s clear layout and the high level of incorporated, intelligent technology offers the user maximum ease of use, from set-up and filling, to transport and the active seedbed preparation inclusive seeding operation. The combination makes it versatile to have everything done in one pass.

On concept from one hand - Thats fits together!

Easy Filling and Lifting The hopper can easily be filled using big bags, a front loader or a telescopic handler. The hopper can also be filled from a scissor trailer and grain auger or small amounts manually by hand. The large hopper capacity of up to 2,100 litres reduces the set-up time. Due to the optimised position of the hopper and the power harrow, the centre of gravity is as close as possible to the tractor. The power harrow is ready for solo operation in short time thanks to the coupling hook EURO-CONNECTION and the removable seed hopper.

ELDOS - exact metering The patented lateral position of the electric driven metering device ELDOS provides ergonomic access for calibration process. The ELDOS, with exchangeable rotors is easy to adjust, without any tools. The e-drill maxi plus has two ELDOS on each hopper side. Easy adjustment A parallelogram and a quadruple joint of the e-drill ensure the optimum and independent adjustment of the power harrow and coulter bar for a precise seed application. The sowing depth can be adjusted without tools by spacers which are located at the two outer hydraulic cylinders or mechanically with a crank. The power harrow is ready for solo operation within a short time thanks to the coupling hook EURO- CONNECTION.

Precise seed placement with CX-II coulter The CX-II coulter with or without press wheel is precise, and very easy to set up. It guarantees smooth running, requires less power to pull and less coulter pressure to reach a constant seeding depth. With press wheel, the sowing depth can be adjusted individually for each coulter. In addition up to three different row spacings are possible due to the clamped coulter version. Perfect covering of the seeds Harrowing the soil completes the seeding. An S-shaped harrow ensures an optimum covering of the seeds. The working intensity can be set by the stepless pressure adjustment.

KVERNELAND E-DRILL

OVERVIEW

KVERNELAND E-DRILL

MAXI & COMPACT

Kverneland e-drill compact

Kverneland e-drill maxi

KVERNELAND E-DRILL

MAXI & COMPACT

MAXI AND COMPACT

THE RIGHT MODEL FOR YOU!

The Kverneland e-drill compact, e-drill maxi and e-drill maxi plus are part of a fully integrated power harrow and seed drill combination.

The seed hopper is mounted directly on the three-point linkage of the Kverneland power harrow for a positive centre of gravity reducing the requirement for lifting power.

The distribution head is mounted directly on the coulter bar, allowing the hopper capacity to be increased to up to 2,100 litres with use of an optional hopper extension.

The patented hinged hopper cover can be fully opened for easy filling with a front-loader, big bags or filling auger. The cover is protected by a bump protection and can flex up to 15°. The loading platform between hopper and distribution head ensures safe access for filling and maintenance purposes. Working lights inside and outside the hopper allow safe use even in darkness.

e-drill maxi plus - combinded application seeds and fertilzer

Kverneland e-drill maxi plus

The e-drill maxi plus is able to apply two items in one pass. It can be two types of seeds or seed and fertiliser or a combination with e.g. slug pellets or only one type of seed by using the complete hopper. The hopper can be divided into an adjustable hopper ratio of 60:40, 70:30 or 100:0 with two independently working metering devices ELDOS positioned either side. The full hopper volume can be used when sowing one sort of seed only. With the double entry CX-II coulter the seeds/fertiliser is applied precise in the seeding row in just one pass.

Hopper capactiy (l)

Model

with extention

Standard

e-drill compact

1,100 1,600

1,400 2,000

e-drill maxi

2,100 l Hopper can divided for two items 0:100, 70:30 or 60:40

e-drill maxi plus

Electronic low level sensors, adjustable from outside the tank, monitor a range of seeds from small quantities of rape as well as larger quantities of e.g. beans and increase optimum sowing management.

KVERNELAND E-DRILL

E-DRILL MAXI PLUS

THE PLUS

TWO ITEMS IN ONE PASS!

PLACEMENT WITH CX-II DOUBLE-ENTRY COULTER (2 DISTRIBUTION HEADS) WITH E-DRILL MAXI PLUS OR E-DRILL COMPACT / MAXI IN COMBINATION WITH A FRONTHOPPER F-DRILL

1 ST POSSIBILITY: 2 ITEMS IN ONE PASS 2 SORTS OF SEEDS ALTERNATING (E.G. BEANS / RAPE OR SUNFLOWERS). THE DISTANCE IN THE ROW AND THE REPITITION BETWEEN THE ROWS IS DETERMINED BY THE NEEDS OF THE LEADING CULTURE

3 TH POSSIBILITY: 2 ITEMS IN ONE PASS 2 SORTS OF SEEDS IN THE SOWING ROW (E.G. BEANS & RYE)

With the CX-II double-entry coulter two sort

With the CX-II double- entry coulter one sort of seed is placed shallower and in a certain distance an other seed is placed deeper. One seed is the companien seed.

of seeds are placed in the

same sowing row e.g. as companion seed.

12.5cm, 15cm or 25cm

2 ND POSSIBILITY: 2 ITEMS IN ONE PASS 1 SORT OF SEED & FERTILISER IN THE SOWING ROW

With the CX-II double- entry coulter one sort of seeds and fertiliser is placed in the same sowing row e.g. wheat with NPK.

12.5cm, 15cm or 25cm

KVERNELAND E-DRILL

E-DRILL MAXI PLUS

e-drill maxi plus hopper split: 0:100, 70:30 or 60:40

KVERNELAND E-DRILL

A-DRILL

• Application of an additional product

• Independent metering device

• Distribution into the soil flow of the following harrow

• Application rates from 50kg/ha (depending on working width and speed)

• Simple calibration

• Wide choice of rotors

KVERNELAND E-DRILL

A-DRILL

INTEGRATED SEED DRILL A-DRILL APPLICATION OF A THIRD ITEM

On all e-drill models (except on e-drill compact mounted on M series), the integrated seeder a-drill with 200 litre capacity can be mounted. The extra hopper with separate metering device allows to apply an additional sort of seeds, fertiliser or other products like slug-pellets into the soil flow of the following harrow in one pass. There are many reasons to promote the establishment of additional crops or to apply extra nutrients. An additional crop will suppress weed growth and does not compete with the leading crop. The extra crop catch the mineral nitrogen in the soil as well as air nitrogen when mixing with leguminous plants and transform it into organic nitrogen. Thus, the nitrogen will still be available for the next crops. Fertilisers are applied to support plant growth specifically of the youth development and thus more precisely to prevent any losses into the groundwater. In addition soil structure, stability and fertility is improved by root development, diversity, humus build-up and erosion protection. The a-drill has 8 outputs which will spread the flow of seeds or fertilisier by the baffle plate uniformly into the soil flow of the following harrow over the entire working width. The a-drill is delivered with different types of rotors: for small seeds (rape, mustard, cabbage, clover, etc ...), medium rotors for seeds like vetch, grass or sunflowers and for large seeds (peas, horse beans, etc ...) or fertilisier/ insecticides, it is strongly advised to choose the Flex rotors option, which is able of deforming with large seed diameter. The agitator placed above the rotor ensures a steady stream of seeds. A brush, located at the base of the rotor, will regulate the flow and improve the setting accuracy. Up to 8 different rotors are available for fine, medium and big sized seeds Seed metering adjustment is released with the control box from the cab. Two control boxes are available: Version 5.2 which monitors and controls flow speed regulation, ha and hour counter, self-diagnosis, etc. It can be connected to a radar or Isobus 7-pin tractor speed information plug. Version 1.2 which controls rotor speed, the calibration test, the fan (on/off) and the level sensor.

Control box 5.2

Control box 1.2

a-drill 200 Hopper capactiy (l)

200

No. of spreading deflectors Electric fan drive Hydraulic fan drive Application rate/minute (50kg/ha; 4m working width at 12km/h)

4kg/min

Total weight (kg)

100-115

KVERNELAND E-DRILL

E-DRILL MAXI PLUS WITH A-DRILL

PLACEMENT WITH CX-II DOUBLE-ENTRY COULTER (2 DISTRIBUTION HEADS) & APPLICATION WITH THE A-DRILL INTO THE SOIL FLOW OF THE FOLLOWING HARROW (BAFFLE PLATE) 3 ITEMS IN ONE PASS

1 ST POSSIBILITY: 3 ITEMS IN ONE PASS 1 SORT OF SEED (E.G. WHEAT, BARLEY, BEANS ETC.) & FERTILISER IN THE SOWING ROW AND SLUG PELLETS VIA THE FOLLOWING HARROW

2 ND POSSIBILITY: 3 ITEMS IN ONE PASS 1 SORT OF SEED (E.G. WHEAT/BARLEY) & FERTILISER IN THE SOWING ROW AND 1 SORT OF SEED (E.G. CLOVER) VIA THE FOLLOWING HARROW

12.5cm, 15cm or 25cm

With the CX-II double-entry coulter one sort of seed e.g. wheat, barley etc. is placed together with specialized fertliser/microgranule which will not burn the seed. With the soil flow of the following harrow a third item such as clover is applicated for weed control and nitrogen fixation of the air. The soil is protected against erosion due to the quick plant cover and leaching of nutriets avoided.

With the CX-II double-entry coulter one sort of seed e.g. beans, wheat or barley etc. is placed together with a specialized coated fertliser/microgranule that does not burn the seed in the same sowing row. The fertiliser promotes the youth development of the plant. In addition, a third item such as slug pellet is applied via the baffle plate in one pass with the soil flow of the following harrow. High yields start in the years before with the right tillage, crop rotation, trafficking, weed control, weather conditions, etc. A good start is provided with nutrients to support the youth development and protection against pests and weeds is also important. Wheat sown with fertiliser and slug pellets in one pass with the a-drill.

Wheat after harvest and clover as a catch crop which was applied with the a-drill.

KVERNELAND E-DRILL

E-DRILL MAXI PLUS WITH A-DRILL

4 TH POSSIBILITY: 3 ITEMS IN ONE PASS 2 SORTS OF SEED IN THE SOWING ROW (E.G. BEANS & RYE) AND 1 SORT OF SEED (E.G. CLOVER) VIA THE FOLLOWING HARROW

3 RD POSSIBILITY: 3 ITEMS IN ONE PASS 2 SORTS OF SEED IN DIFFERENT SOWING ROWS (E.G. BEANS & RAPE) AND SLUG PELLETS/FERTILISER VIA THE FOLLOWING HARROW

12.5cm, 15cm or 25cm

12.5cm

With the CX-II double-entry coulter two seed types are placed not in the same sowing row but in a certain sequence e.g. rape as main crop and beans as a companion crop. Slug pellets are applied with the a-drill via the baffle plate into the soil stream of the following harrow. The beans freeze over the winter and do not compete with the rape in springtime. In addition to N-fixation and the contribution to erosion control, companion crops can provide other benefits such as improved soil fertility, reduced pest pressure and a weed-suppressing effect until the end of vegetation. The coulter pressure to achieve the deeper sowing depth of the beans is very high. For the shallower rape sowing depth, the setting of the press wheel of according coulter is adjusted differently via the hole pattern.

With the CX-II double-entry coulter two seed types are placed in the same sowing row e.g. beans/peas and rye/triticale. With the soil flow of the following harrow a third seed is applicated e.g. clover for weed control and increase soil fertility due to its ability to fix nitrogen from the air at the roots.

Sunflowers are planted in every fourth row, maintaining a distance of 50cm between each seed and sowing them at a depth of 5cm. To increase biodiversity, clover is sown in the remaining rows at a depth of 2cm. Slug pellets were applied using the a-drill. The clover will not freeze but will cover the soil, providing a greening effect. This improves soil stability and carrying capacity. The intensive rooting of diverse root systems protects the soil against erosion. Humus formation is enhanced, while water-holding capacity and infiltration are improved. Nutrients and CO 2 are bound. Additionally, clover being a legume, helps fix nitrogen from the air into the soil. Clover can also be used as forage and as an energy source.

A mixture of small seed such as ray grass, phacelia and a bigger seed like peas in one sowing row and clover via the a-drill to cover the soil quickly.

KVERNELAND E-DRILL

METERING DEVICE ELDOS

OPTIMUM SEED PLACEMENT WITH ELDOS

AUTOMATIC AND SAFE

ELDOS is the electric driven metering device for Kverneland pneumatic seed drills. It is state-of-the-art technology for perfect seed placement.

ELDOS is steered by Kverneland e-com or e-bas software. The e-com version is fully ISOBUS compatible . By the automatic section control, GEOCONTROL, the metering device stops/starts automatically. Double and/or missed seeding on headlands or odd-shaped fields is avoided. Special sensors ensure complete functionality from the tractor cab. An even establishment is achieved by using application maps. Each zone of the field receives the optimum seed rate. The advantages of uniform growth make every subsequent input application more effective. The e-bas system provides the basic electronics required to operate and monitor the machine functions via the Focus 3 terminal. It controls the ELDOS metering device, the tramlining, the hectare metre and fan speed control. The e-bas system is not ISOBUS compatible and cannot communictate with a GPS system.

Kverneland Tellus 1200 the ISOBUS terminal with up to four fully customizable touch screens.

Self-controlled and fail-safe.

Calibration is automatic, and a range of interchangeable seed metering rotors can be swapped - even when the hopper is full - without the need for tools. Sensors monitor the metering rotors and the calibration flap and give a warning if the wrong metering rotors are accidentally installed or the flap is not closed.

Rotor 1 for high rate cereals or fertilizer

Rotor 2 for grass or similar

Rotor 3 for rape and small seeds

Rotor 4 for low rate cereals or fertilizer

Rotor 5 for maize, sunflowers and greening seeds

A calibration bag and set of digital scales are supplied as standard. The calibration tests are carried out electronically rather than manually.

KVERNELAND E-DRILL

METERING DEVICE ELDOS

•Easy exchange of rotors

• Five rotors for all sorts of seeds and fertiliser

•Self-monitoring system

•Application rates from 1-400kg/ha (depending on working width and speed)

•Simple and automatic calibration

KVERNELAND E-DRILL

On slightly sticky soils an optional scraper is recommended for the press wheel.

CX-II COULTER WITHOUT PRESS WHEEL

CX-II coulter double entry for application of two products (e.g. fertilizer and seeds) in one pass.

CX-II coulter with press wheel The coulter depth and thereby the sowing depth is finely adjusted via the press wheel without the need for tools. This ensures precise, individual seed placement for each coulter in all soil conditions. The system delivers always smooth operation, optimal ground following, and the flexibility to set different sowing depths coulter by coulter across the working width for example, placing beans deeper as a companion crop while sowing the main crop, such as rape, shallower. In extremely wet conditions, the press wheel can be lifted to allow operation without it or optional scraper are available.

The press wheel can be set in several positions to ensure perfect seed placement coulter by coulter.

Lifted press wheel setting recomended in wet and sticky conditions.

KVERNELAND E-DRILL

CX-II COULTER

CX-II COULTERS FOR PRECISE APPLICATION FOR BEST GERMINATION CONDITIONS

Precision seed and fertiliser placement is essential for efficient and sustainable farming. Kverneland e-drill models equipped with clamped CX-II coulters are designed to maximise yield while minimising environmental impact – thanks to reduced soil disturbance, targeted application, and low wheel compaction.

The CX-II disc coulter ensures smooth operation, minimal soil disturbance and precise seed placement. Its flat cutting angle of only 5.4° requires less coulter pressure to reach a consistent sowing depth. Combining a 325mm steel disc with a flexible plastic disc, there’s no need for scrapers. The CX-II coulters are maintenance-free and can achieve up to 50kg coulter pressure with a pre-loaded spring. Safe operation is ensured even at high working speeds and with a certain amount of plant residues on the soil surface. With an inter-row coulter staggering of 445mm the CX-II operates in all field situations – for professional sowing results, row by row.

CX-II coulter with press wheel Press wheels can be adjusted in different positions or can be lifted out to adapt quickly to changing conditions. The individual depth settings allow different depths even within one machine width alternately row by row. This can be crucial for sowing multiple products in a single pass, e.g. rape at a shallower depth and companion crops like beans deeper.

CX-II coulter without press wheel Alternatively, Kverneland provides a cost-efficient CX-II coulter version without a press wheel for wet and sticky soils. The special curved disc design provides sufficient bearing capacity even in lighter conditions. This option may also be appealing for reducing lifting capacity, allowing smaller tractors to operate the seed drill.

CX-II coulter double-entry The CX-II coulter with double-entry application tubes allows to apply two products in one pass. Different distribution heads and a certain amount of shut-off valves are available to regulate the seed flow. Two products are placed with one coulter, e.g. as seed mixture or seeds together with special fertiliser that will not burn the seeds. This is especially suitable for example, phosphoric fertiliser to support the initial germination and youth development of the plants in the most efficient way.

KVERNELAND E-DRILL

Precise smooth running The 325mm steel disc and the flat profile disc angle of 5.4° draws a narrow furrow which reduce power requirement. User-friendly The CX-II coulter is completely maintenance free and very easy to set-up. A pre-loaded spring ensures an optimum penetration. Optimum seed-to-soil contact The press wheels (Ø 250mm x 42mm) can be set in different positions or can be lifted out of work depending on soil conditions. An optional scraper is available for sticky soils. Centrally adjustment of seed depth The seed depth adjustment can be controlled centrally via mechanical cranks or as option hydraulically via by two outer hydraulic cylinders. Maximum clearance The coulter staggering of 445mm guaranties save soil flow even with higher rates of residues.

Three seed spacings are available. 12.5 / 15 / 25cm

KVERNELAND E-DRILL

CX-II COULTER

TAILORED TO YOUR STRATEGY

FLEXIBLE SPACINGS: 12.5, 15 OR 25CM

The row spacing is a strategic choice – and often a matter of philosophy of the arable system. Every farmer must decide individually, based on crop type, local yield potential, crop care actions and the harvest utilisation of the crop. The row spacing has a significant impact on both chemical and mechanical weed control strategies. With the proven Kverneland CX-II coulter, three different row spacings are factory fitted possible, thanks to the clamped bracket system and its slim, compact design – giving you the flexibility to tailor your seeding system to your needs. Row spacing can be adapted later on, allowing the machine to respond flexibly to future challenges

A spacing of 12.5 or 15cm is ideal for higher seed rates, ensuring excellent seed distribution. Narrow spacing ensures fast row closure, better weed suppression and support efficient use of light, water, and nutrients.

You have the choice!

A wider spacing of 25cm offers the advantage that the microclimate of the standing crop is better against fungal infestation by improved air circulation within the crop stand. New type of seeds (hybrid) achieve higher yields per spike. Therefore, less seeds per m 2 are needed. This is especially beneficial in areas where water is the limited factor. Additionally, fewer coulters per metre reduce pulling and lifting force requirements and offer better clearance in wet and sticky conditions. Wider spacing allows for easier mechanical weeding and better access for inter-row cultivators.

Clamped brackets of the CX-II coulter to be flexible in row spacing.

KVERNELAND E-DRILL

ADJUSTMENT

12)

13)

1) Mechanical sowing depth adjustment 2) Hydraulical sowing depth adjustment and coulter bar lifting 3) LED working lights inside and outside the hopper

11)

10)

4 Pre-emergence marker for perfect crop care 5) Hydraulic overload protected track markers

6) The seed flow sensor detects blockages and warns of them. 7) Easy access to the ELDOS due to patented lateral positioning 8) Mechanical coulter pressure adjustment with scale and crank 9) Hydraulical coulter pressure adjustment with scale 10) Quick emptying chute for easy hopper clearing Low level sensor adjustable from outside the hopper 11) Radar speed sensor 12) Distribution heads outside the hopper with shut-off valves and half width switch-off as option 13) LED road light kit for safe road transport

KVERNELAND E-DRILL

ADJUSTMENT

USER-FRIENDLY ADJUSTMENTS

FOR PERFECT SOWING DEPTH

The sowing depth can be adjusted mechanically centrally via crank or hydraulically via spacers at the two cylinders without any tools.

The quadruple joint of the coulter bar ensures a constant seed application by the short and long coulters at any sowing depth. The parallelogram of the power harrow guarantees an independent adjustment of the tine depth without any impact to the sowing depth. Without re-adjustment of the coulter bar, the complete coulter bar can be lifted e.g. for the preparation of the headlands.

The patented lateral position of the metering device ELDOS ensures a good and ergonomic access. This also facilitates an easy rest emptying and cleaning of the hopper.

In addition the depth adjustment of the following harrow is organised centrally by a crank. The scale allows an easy control, even if the complete harrow is lifted up.

Always the right speed! A radar speed sensor records the speed in order to maintain the relevant distribution rate at the correct time.

The sowing depth can be adjusted centrally by spacers at the two hydraulic cylinders without any tools or as standard equipment mechanically by two outer cranks.

The pressure and height of the S-tine following harrow are adjusted using a crank. The angle can also be modified to customise the aggressiveness of the operation.

The coulter bar can be lifted completely for solo use of the power harrow.

KVERNELAND E-DRILL

EURO-CONNECTION

FLEXIBLE WITH EURO-CONNECTION SOLO OR IN COMBINATION

Despite the integrated concept, the coulter bar can be coupled or uncoupled quickly via EURO-CONNECTION, allowing the power harrow also to be used solo. In addition there is the possibility to remove the hopper too.

Flexibility is key

The coulterbar is attached with the EURO-CONNECTION directly to the roller frame. The coupling hook is similar to the front loader coupling. This can quickly and easily be hitched thanks to the readily accessible hydraulic and electronic interface. Track markers are attached to the power harrow, therefore, the power harrow is ready for solo operation within short time. The e-drill model is exclusively designed to be combined with Kverneland power harrows. The power harrows need to be equipped with the EURO-CONNECTION coupling system. Conversion made simple! In a matter of minutes, the solo machine can be converted into a power harrow seed drill combination.

Flexible use of the power harrow whether with seed hopper or in solo operation depending on soil conditions.

KVERNELAND E-DRILL

EURO-CONNECTION

iM CALCULATOR APP FREE TO DOWNLOAD

With GPS it is possible for the farmer to accurately seed, spread and spray without any overlap. The iM Calculator app calculates the cost saving by using those GPS functionalities .

Save seeds and money!

EURO-CONNECTION

After filling in the required data, the calculator clearly shows what you can save in terms of money. The amount of seeds saved depends on the size and shape of the field and may amount to more than 5%.

The iM Calculator app for tablets is free to download from the App Store or Google Play.

Please scan the QR code or find the online calculator on our homepage: http://imcalculator.kvernelandgroup.com/#/

KVERNELAND E-DRILL

ZONE A: SURFACE Larger aggregates on the surface — weatherproof

ZONE B: SEED HORIZON Smaller aggregates in the seed zone — good seed-to-soil contact

ZONE C: BELOW SEED HORIZON Mixed aggregates below seed zone with vertical fractures without restriction — good root development and capillary water access.

KVERNELAND E-DRILL

SEEDBED PREPARATION

POWERFUL SEEDBED PREPARATION FOR SUCCESSFUL GERMINATION

An optimal seedbed with a load-bearing seed horizon into which the seeds can be embedded at an absolutely even depth over the whole area of the field is the basis for high field emergence and thus for high yields. It requires an unbroken association between the seed horizon and the capillary water conducting lower layer to ensure germination in the absence of rainfall. Additionally, rapid heating of the soil and adequate oxygen supply to the germination seeds and a fine crumbled and uniform reconsolidated seedbed for an optimal seed coverage is important too.

The e-drill models are specifically designed for combination with Kverneland power harrows of the M, H, and S series.

Qualitiy made in Germany

Power harrows have long since become typical combination machines because they are largely independent of the soil conditions. On heavy soils it reaches an intensive crumbling. Under light conditions, it can work flat and at a lower rotor speed. Consequently, there is no better alternative for seedbed preparation.

A power harrow together with a seed drill is finally an economic high performance combination. Seed bed preparation and seeding in one pass!

In order to prevent damage caused by stones and ensure even levelling 4 rotors per meter and the helical tine positioning reduces the peak loads on the driveline and results in smoother running and less fuel consumption.

The Quick-Fit tines makes is easy to exchange without any tools.

KVERNELAND E-DRILL

POWER HARROWS

FLEXIBLE WITH EURO-CONNECTION SOLO OR IN COMBINATION

S series A heavy-duty power harrow for all types of work in all conditions. The robust design is suitable for use with tractors up to 250hp.

H series The H Series is the perfect choice for medium-sized farms and contractors for solo seedbed preparation or in combination with a seeder. For tractors up to 180hp.

M series The Kverneland M series is a strong but compact power harrow for tractors up to 140hp. The self-supporting construction of the drive box and the tapered bearings ensure good performance.

Kverneland power harrows

Min – Max power requirement (HP)

Frame Working width (m)

Roller

Combination seed drill

M series H series

rigid rigid

2.5 - 3.0

70 – 140 85 – 180

e-drill compact e-drill compact, e-drill maxi, e-drill maxi plus,

Tooth packer roller (ø 575mm), Actiline roller (ø 550mm), Actipack roller (ø 560mm)

3.0 - 3.5 - 4.0

S series

rigid 3.0 - 3.5 - 4.0 - 4.5

100 – 250

KVERNELAND E-DRILL

Fantastic germination “We struggled last autumn to get crops in with our previous drill due to constantly changing weather patterns ,” explains William Orr, of West Mains. Therefore the family-run farming business bought a 4m e-drill maxi, sitting above a 4m NG-S power harrow which create a close-coupled combination with the tractor. The outfit arrived in time to drill 100ha of spring barley. With 300ha of combinable crops, the farm ploughs ahead of the drill. He believes the power harrow’s cracker packer provides the optimum level of consolidation directly behind the coulters. “We’re really pleased with the seed placement and germination,” says William. A Tellus in-cab terminal takes care of drill set-up, with the farm yet to take advantage of ISOBUS. “That said, it’s already a very easy machine to use. Seed rolls are easy to swap and calibration is straight-forward,” he adds. “I don’t have auto start/stop on the drill, so I do need to allow for a little overlap.” “The e-drill has done a fantastic job." Mr Orr is so pleased with the e-drill that he plans to sow oilseed rape with it, this summer.

William Orr, West Mains UK

KVERNELAND E-DRILL

ISOBUS PRODUCTS

E-DRILL`S ARE WITH E-COM FULLY ISOBUS COMPATIBLE

VARIABLE RATE FOR EVEN CROP ETABLISHMENT OF CROPS

With GPS and an application map, the e-drill automatically adjusts seed rates variable based on pre-defined zones. In combination with the electrically driven metering unit ELDOS, the system ensures precise seeding across varying field conditions. When the seeder enters a designated zone, the seed rate is automatically adapted for that area – increasing efficiency and saving inputs.

320/m 2

280/m 2

350/m 2

280/m 2

iM FARMING - smart, efficient, easy farming

350/m 2

8/m 2

Speed up on the path towards connected agriculture. We offer you numerous options and solutions for how to produce more with less; utilise inputs more efficiently and thereby increase profits and sustainability.

280/m 2

300/m 2

320/m 2

Example: wheat seeds/ha depending on yield expectation and soil condition. Grid 5x5m

KVERNELAND E-DRILL

ISOBUS PRODUCTS

Tellus 700 - Single Screen, Multiple Options Tellus 700 simplifies precision farming with smart features, custom mapping, and a user-friendly design. With ISOBUS compatibility and flexible packages, it boosts in-field efficiency and control.

Tellus 1200 - Multiple Screens, Even More Options Tellus 1200, the 12-inch universal Terminal offers intelligent hopper monitoring and precise variable rate application for fertiliser and seed. With an intuitive interface, multi-screen functionality, and GEOCONTROL compatibility, it delivers smart, all-in-one control beyond standard tractor systems.

The best overview in farm management IsoMatch FarmCentre is a cloud-based farm management tool that works seamlessly with Tellus 700 and Tellus 1200 terminals. It allows you to monitor machine activity, send tasks remotely to the terminal, and access real-time data and job reports - anytime, anywhere for smarter, more efficient farming.

Kverneland Sync – the Implement Gateway Always Connected – Easy and Direct

With Kverneland Sync, your implement stays connected to Kverneland online services, ensuring efficient, user-friendly data transfer to IsoMatch FarmCentre and Kverneland ServiceCentre.

GEOFENCING Protect your implement against theft with GEOFENCING and a backup battery, ensuring localization even when the implement is not connected to a tractor.

Task Management Enhance reporting and transparency with real-time tracking, performance measurement, and secure data storage in IsoMatch FarmCentre. Perfect for managing logistics and invoicing in machine cooperations.

Kverneland ServiceCentre Minimize downtime with remote diagnostics via Kverneland ServiceCentre, enabling technicians to quickly resolve electronic issues from a distance.

Kverneland Global 3 A precision GPS antenna delivering 30–50cm DGPS accuracy for guidance, section control, and advanced farming - boosting efficiency and minimising overlap.

KVERNELAND E-DRILL

PARTS & SERVICE

ORIGINAL PARTS & SERVICE

LET’S FOCUS ON YOUR BUSINESS

KVERNELAND E-DRILL

PARTS & SERVICE

MYKVERNELAND

SMARTER FARMING ON THE GO

A personalised online platform tailored to your machine needs With MYKVERNELAND you will benefit from easy access to Kverneland’s online service tools. Receive first hand access to information on future developments and updates, operator and spare part manuals, FAQs and local VIP offers. All information is gathered in one place.

KVERNELAND E-DRILL

TECHNICAL DATA

Model

e-drill compact

e-drill maxi

e-drill maxi plus

Maschine type

cultivator mounted

Working width (m) Transport width (m) 5) Hopper capacity (l) Hopper extension (l)

3.0 3.0

3.5 3.5

4.0 4.0

3.0 3.0

3.5 3.5

4.0 4.0

3.0 3.0

3.5 3.5

4.0 4.0

1,100

1,600

2,100 1)

300

400

Quick emptying chute Low level sensor Integrated seeder a-drill 200 Combination with f-drill (CX-II double entry)

Kverneland power harrow

M / H / S series

H / S series

Metering device & Tramline system Drive 1000 rpm

Hydraulic fan drive (without valve) Hydraulic fan drive with valve Hydraulic fan drive Load Sensing ELDOS electric driven metering device (No.) e-bas electronic incl. Focus 3 Terminal 3) e-com electronic excl. Tellus Terminal 3) Tellus 1200 or Tellus 700 Terminal

(1)

(2)

Metering device control Seed rate adjustment Seed quantity (min. - max.)

1 - 400kg/ha

Shut-off magnet valves for tramlines Electric half-width shut-off Sensor seed flow control Pre-emergence marker Vertical hydr. folding track marker with notched disc Others S-tine harrow (10mm) Toolbox and calibration set Camera Loading step / Platform Road light kit

(LED) (LED)

Working lights (inside/outside hopper)

Oil charge hydr. fan (l/min)

Min. power requirement (HP/kW)

100 / 74

115 / 85

125 / 92

130 / 96

140 / 103

150 / 110

130 / 96

140 / 103

150 / 110

1,220

1,315

1,400

1,260

1,345

1,440

1,560

1,645

1,740

Weight (kg) 2)

KVERNELAND E-DRILL

TECHNICAL DATA

Model

e-drill compact

e-drill maxi

e-drill maxi plus

Maschine type

cultivator mounted

Working width (m)

3.0

3.5

4.0

3.0

3.5

4.0

3.0

3.5

4.0

Coulters & adjustments No. of coulters 12.5cm distance 4) No. of coulters 15cm distance 4) No. of coulters 25cm distance 4) CX-II coulter incl. press wheel

24 20 12

28 24 14

32 26 16

24 20 12

28 24 14

32 26 16

24 20 12

28 24 14

32 26 16

CX-II coulter double entry

(Comb. w. f-drill)

CX-II coulter without press wheel

CX-II coulter disc Ø (mm) Press wheel Ø (mm) Press wheel scraper Coulter pressure (kg)

325

250 x 42

5 - 50

Mechanic coulter pressure adjustment by crank Hydraulic coulter pressure adjustment Mechanic central seed depth setting by spindle Hydraulic central seed depth setting incl. coulter bar lifting EURO-CONNECTION

Standard equipment Option

1) Possible hopper split: 0:100; 40:60 or 30:70 2) Weights given as an indication. Without power harrow and with CX-II coulter 12.5cm 3) Pre-assembled at the factory. Depends on ordered basic machine. 4) Pre-assembled at the factory. Retrofit kits for long and short CX-II coulters optional available to customize row spacing locally. 4) Road transport see local homologation. Depending on regulations, a transport device may be necessary.

- Not available

The Focus 3 terminal runs the e-bas system to control all basic electronic functions of the machines such as the ELDOS metering device, the hopper low level sensor and various tramlining systems. It provides information on hectare, km/h and fan speed. They are shown on a large, clear digital display. The Focus 3 also has a full diagnostic function for testing machine sensors and outputs. The Focus 3 is not ISOBUS compatible and it does not support GPS signals or applications.

Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute basis for any legal claim against Kverneland Group. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group reserves the right at any time to make changes to the design or specifications shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary, e.g. for maintenance purposes, please contact proper assistance or supervision of a technical assistant. © Kverneland Group Soest GmbH

KVERNELAND E-DRILL

KVERNELAND e-drill 01/09.2025

WHEN FARMING MEANS BUSINESS

kverneland.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40