INTER-ROW ELEMENT
VERSATILE
ADJUSTABLE TO INDIVIDUAL REQUIREMENTS
The right weeding machine for your row crops needs to be adaptable to a number of inter-row elements and additional tools to suit your with your individual field and soil conditions.
The X-CONTROL parallelograms can be fixed without restriction across the entire width of the frame so that row spacing can be adapted to any crop type, e. g. for cereals from 12.5cm. With the universal frame system (UF System) all connections can be easily changed thanks to its leak-free push-pull systems and ISOBUS connections which are available in specific spacings over the entire frame. The UF System enables a quick adaptation from one crop to another.
Prepared for all conditions
The depth guidance wheels ensure a good ground following in all conditions at a constant working depth in front of each weeding element without a bulldozing effect. According to row width, two versions (narrow or wide with low pressure) are available to avoid over rolling and damaging the crop. These guidance wheels are for setting the working depth and must be adjusted via a screw. A scale from 0-10 helps to be as precise as possible.
Precise weed control with flexible adaptation of the inter-row are ensured by the tine holder and slider system. Up to 3 holders and up to 5 tines per inter-row weeding element manage the full-cut between the plant rows of 12.5 to 80cm spacing.
Examples
KVERNELAND ONYX
17
Powered by FlippingBook