QUALIDISC 21000 T
QUALIDISC T IN 10.25 AND 12.25M WORKING WIDTH PREPARED FOR CONTROLLED TRAFFIC FARMING
Constant ground following over the complete working width, especially at shallower depths can be a challenge of larger implements in soil cultivation. Therefore, Kverneland arranged the new Qualidisc T model with four independently mounted frame segments including a “Ground Contour System (GCS)”. The result is an exceptional ground following performance. The pressure of the four frame sections can be adjusted pair by pair using the Ground Contour System to achieve constant pressure on each section. Compared to a system with accumulators, there are no pressure deviations in the working sections when, for example, passing a ridge. The set pressure is always the pressure applied to the soil to obtain a perfectly flat, worked soil layer and surface. The powerful Qualidisc T was developed to work at high speeds of up to 20km/h without compromise on working performance. Thanks to the optimised spacing between gauge wheels and rear roller high stability without jumping is ensured. The conical disc ( ⌀ 600mm) itself is the same as on the Qualidisc Pro models and ensured precise working depths from 3cm to 15cm. The high frame clearance ensures blockage-free cultivation even with a higher amount of residues like maize straw. The transport wheels are at the rear of the machine which give extra stability during transport and will be lifted on top of the roller to provide extra weight.
Suivi parfait du sol grâce au système GCS. Pression constante sur chacune des quatre sections.
KVERNELAND QUALIDISC
17
Powered by FlippingBook