Kverneland TS-DRILL tine seeder

Brochure Kverneland TS-DRILL tine seeder

NAME TS-DRILL TANDEN ZAAICOMBINATIE TS-DRILL TINE SEEDER

WHEN FARMING

MEANS BUSINESS

Realising the full potential of farming is about growing and developing your business, not only your crop or livestock, but also your profit. Improve productivity and profitability by focusing on the positives and minimising disadvantageous aspects, through strong, dedicated management. Success springs from determination and clear targets, from laying down the appropriate strategy and allocating correct investments for the future. Quality results require the right ideas and equipment. When there is work to be done, you need the optimal setup and smart solutions that support you towards an easier, more profitable way of working. You need solutions that make tough and demanding conditions less complicated.

KVERNELAND ts-drill

The iM Farming logo appears when the implement can be connected to our smart farming systems and accessories, essential for managing your business.

SOW

Effective sowing means speeding up when the soil is exactly right, in order to give your crop a head start.

KVERNELAND ts-drill

SPEED

PERFORMANCE

EFFICIENCY

VERSATILITY

KVERNELAND ts-drill

INTRODUCTION

EFFECTIVE SOWING

TO GIVE YOUR CROP A HEAD START

Speed When the time is right, you want to seed immediately. Tomorrow conditions may be worse, so speed is important. You need a machine that has the right equipment and capacity to finish the job in time. To give your crop a headstart. Versatility Soil structure is not the same on every field, nor are working conditions. So you often have to adjust your seeder. That’s why we have developed seeders that can be adjusted easily, mainly from the tractor cab.

Performance Especially in extreme conditions, for example, humid soil or high straw residues, the advantages of the ts-drill become evident. In a single pass, the auto-reset tines take care of tilling and seeding, which in turn reduces soil compaction whilst saving fuel and time. Efficiency You invest in the best equipment for seeding your crop. In return, you want the best results and low cost of operation. Our seeders are developed with the lowest weight possible. Less pulling force needed means saving on fuel costs.

The highest possible efficiency in sowing.

KVERNELAND ts-drill

OVERVIEW

TINE SEEDER ts-drill

THE COST-EFFICIENT ALTERNATIVE

The Kverneland ts-drill is setting the benchmark within this class of machinery. The ts-drill allows cultivation and sowing in one pass, saving time and fuel.

Profitable and versatile.

Passive tools - large capacity The passive tools allow operation at high working speed and the large hopper capacity of 1,700 litres reduces the set-up time. Due to the optimised position of the hopper, the centre of gravity is close to the tractor.

Even depth control Due to the floating wing sections of the ts-drill with 5.00m and 6.00m working width, the ts-drill works fine on slopes or uneven ground. The central position of the landwheels within the main frame adapts perfectly to the ground contours thus ensuring an even depth control. The seeding depth is adjusted with no need of tools. ELDOS - electric driven metering device The easily accessible electric driven metering device, ELDOS, with exchangeable rotors is easy to adjust, without any tools.

Steadiness and strength Durable steadiness of the ts-drill offers reliable operation. The high-quality box section frame together with the well- established pneumatic system provide a long working life.

Various tips for different requirements

The ts-drill has been designed to work in extreme conditions i.e. in dry and wet soil. Established in conventional tillage after the plough, it is also perfect for reduced tillage. A straight coulter tine as standard or an

optional XHD narrow tine for less soil disturbance meet the different requirements.

KVERNELAND ts-drill

OVERVIEW

KVERNELAND ts-drill

OVERVIEW

Operator-friendly • Excellent overview •

Electronic monitoring of all functions Complete control of the machine from the cab on the move

•

Environmentally-friendly •

Close centre of gravity saving fuel

•

Versatile operation: conventional after the plough or after conservation tillage

State-of-the-art technology for the professional farmer.

KVERNELAND ts-drill

OVERVIEW

Close to the tractor. Less lifting force needed. CENTRE OF GRAVITY

1700 LITRES

Large hopper capacity with good access to minimise downtime.

400KG/HA

Application rates up to 400kg/ha depending on speed and working width.

5 ROWS Intelligent symmetrial arrangement of tines for excellent seed depth and levelling.

KVERNELAND ts-drill

ADJUSTMENT

EASY ADJUSTMENT

OPERATOR-FRIENDLY

In particular the ease of handling and the wide range of equipment characterise the ts-drill. Various options combined with high performance make the ts-drill a real alternative among crop establishment systems. User-friendly adjustment and clear scales facilitate easy setting of the machine depth and allow quick return to previous positions. The horizontal alignment of the machine is controlled by a simple indicator at the hopper. The seeding depth is adjusted without the need of any tools using a series of spacers which control the depth wheels mounted in the centre of the drill. Thus, the ts-drill can be changed from shallow rape seeding to deeper wheat seeding within a short time.

Easy access to all elements.

The patented lateral position of the metering device ELDOS provides ergonomic access for calibration process.

An electronic low level sensor , adjustable from the outside of the tank at three filling level, monitors a range of seeds from small quantities of oil-seed rape to bigger seeds and larger quantities.

KVERNELAND ts-drill

ADJUSTMENT

• User-friendly adjustment by spacer

• Clear scales

• Side depth control wheels

• From shallow sowing of rape to deep placement of field beans

KVERNELAND ts-drill

METERING DEVICE ELDOS

OPTIMUM SEED METERING WITH ELDOS

AUTOMATIC AND SAFE

ELDOS is the electric driven metering device for Kverneland pneumatic seed drills. It provides state-of-the-art technology for perfect seed placement.

ELDOS is steered by Kverneland e-com or e-bas software. The e-com version is fully ISOBUS compatible . By the automatic section control, GEOCONTROL, the metering device stops and starts automatically. Double and/or missed seeding on headlands or odd-shaped fields are avoided. Special sensors ensure complete functionality from the tractor cab. The e-bas system includes the basic electronics to run and monitor the machine functions via the Focus 3 terminal. The e-bas system controls the ELDOS metering device, the tramlining, the hectare metre and fan speed control.

Self-controlled and fail-safe

Calibration with ELDOS is automatic, and a range of interchangeable seed metering rotors can be swapped - even when the hopper is full - without the need for tools. Sensors monitor the metering rotors, and give a warning if the wrong metering rotors are accidentally installed.

For even more precision, connect implement with an ISOBUS terminal.

KVERNELAND ts-drill

METERING DEVICE ELDOS

• Easy exchange of rotors

• Five rotors for all sorts of seeds and fertiliser

• Self-monitoring system

• Application rates from 1-400kg/ha (depending on working width and speed)

• Simple and automatic calibration

KVERNELAND ts-drill

SEEDING TINE

•

5 rows of tines

•

Straight or XHD narrow tines

•

Offset configuration

•

Centrally mounted depth wheel

•

Toolless depth adjustment via spacers

KVERNELAND ts-drill

SEEDING TINE

AFTER CONSERVATION OR CONVENTIONAL TILLAGE LEAF-SPRING TINE PROTECTION

The seeding tines of the ts-drill are made of high quality spring steel fitted with the Kverneland leaf- spring auto-reset overload protection. To ensure the free flow of crop residues through the machine, the tines are arranged in an offset configuration over five rows.

Perfect sowing results also in extremely humid and sticky soil conditions.

The ts-drill can be ordered with either 12.5cm or up to 15cm row spacing depending on working width and tine spacing. The special design of the tines reduces the tractor power requirements and ensures a constant depth control. The standard straight coulter tines ensure optimal seed placement and soil flow. The alternative narrow tines with XHD carbide tip minimise additionally soil disturbance and improves the ts- drill’s flexibility for conventional and conservation tillage systems thanks to its ability to break up the surface. The XHD carbide tip increases the life time and makes working in stony conditions easier.

Due to the patented seed outlet without any screws in the tube, the ts-drill allows perfect seeding results also in extremely humid and sticky soil. With the patented outlet it is also easier to change the share tip.

Straight tine

Narrow XHD tine

KVERNELAND ts-drill

GROUND CONTOUR FOLLOWING

KVERNELAND ts-drill

GROUND CONTOUR FOLLOWING

PERFECT GROUND ADAPTATION

SMOOTH AND STEADY RUNNING

With the ability to follow undulating land, the ts-drill proves its quality. Due to the central position of the landwheels within the main frame, the ts-drill adapts perfectly to the ground contours. In comparison to implements with front mounted landwheels, the design of the ts-drill equalises the distance between the tine rows and the landwheels. Therefore the impact on the sowing depth when working on slopes or uneven ground is reduced considerably. Side depth control wheels for machines with working widths over 4.5m support the smooth running. The free-floating wing sections also follow lateral ground contours and provide an even depth control for precise seed placement.

Even depth control.

One tine in front of each landwheel levels the soil and ensures an even and steady running of the ts-drill - a prerequisite for the accurate depth control and seed placement with tine seeders. Seeding can be carried out in a crossways direction to the previous cultivation operations. The Clod Board in the front increases the crumbling effect on ploughed land and ensures active levelling due to the high vibration of the cracker tines. The aggressiveness of the clod board can be adjusted hydraulically from the cab on the move or via a spindle. The clod board bar can be easily be raised out of work especially in very wet conditions or if the optimum soil condition is reached without front levelling to achieve a weatherproof seedbed.

KVERNELAND ts-drill

TINE SEEDER

OPTIMUM GERMINATION

EFFECTIVE SEED COVERING

Various options for effective seed covering ensure best seed-to-soil contact for optimum germination.

1. A two-row precision following harrow (as standard) allows even high quantities of damp plant residues to pass without blocking. The harrow pressure and its aggressiveness can be adjusted via the spring pressure adjustment and the angle of the harrow bar. 2. The combination of a one-row V-type following harrow with rubber suspended press wheels ensures optimum results. Like the following harrow the optional press wheels are divided into three sections. The pressure can be infinitely adjusted by screws. If the seed press wheels are not required due to very humid conditions, they can be completely lifted.

KVERNELAND ts-drill

TINE SEEDER

FOCUS 3

ECONOMIC CONTROL SOLUTION

Focus 3: e-bas system not ISOBUS compatible

• • • • • •

Control of ELDOS Tramlining control Hectare metre Speed control Low level control

The terminal Focus 3 runs the e-bas system to control all basic electronic functions of the machines such as the ELDOS metering device, the hopper low level sensor and various tramlining systems. It provides information on hectare, km/h and fan speed. They are shown on a large, clear digital display. The Focus 3 also has a full diagnostic function for testing machine sensors and outputs.

km/h

The Focus 3 is not ISOBUS compatible and it does not support GPS signals or applications.

KVERNELAND ts-drill

ISOBUS PRODUCTS

TS-DRILL`S ARE WITH E-COM FULLY ISOBUS COMPATIBLE

VARIABLE RATE FOR EVEN CROP ETABLISHMENT OF CROPS

With GPS and an application map, the ts-drill automatically adjusts seed rates variable based on pre-defined zones. In combination with the electrically driven metering unit ELDOS, the system ensures precise seeding across varying field conditions. When the seeder enters a designated zone, the seed rate is automatically adapted for that area – increasing efficiency and saving inputs.

320/m 2

280/m 2

iM FARMING - smart, efficient, easy farming

8/m 2

Speed up on the path towards connected agriculture. We offer you numerous options and solutions for how to produce more with less; utilise inputs more efficiently and thereby increase profits and sustainability.

280/m 2

300/m 2

320/m 2

Example: wheat seeds/ha depending on yield expectation and soil condition. Grid 10x10m

KVERNELAND ts-drill

ISOBUS PRODUCTS

Tellus 700 - Single Screen, Multiple Options Tellus 700 simplifies precision farming with smart features, custom mapping, and a user-friendly design. With ISOBUS compatibility and flexible packages, it boosts in-field efficiency and control.

Tellus 1200 - Multiple Screens, Even More Options Tellus 1200, the 12-inch universal Terminal offers intelligent hopper monitoring and precise variable rate application for fertiliser and seed. With an intuitive interface, multi-screen functionality, and GEOCONTROL compatibility, it delivers smart, all-in-one control beyond standard tractor systems.

The best overview in farm management IsoMatch FarmCentre is a cloud-based farm management tool that works seamlessly with Tellus 700 and Tellus 1200 terminals. It allows you to monitor machine activity, send tasks remotely to the terminal, and access real-time data and job reports - anytime, anywhere for smarter, more efficient farming.

Kverneland Sync – the Implement Gateway Always Connected – Easy and Direct

With Kverneland Sync, your implement stays connected to Kverneland online services, ensuring efficient, user-friendly data transfer to IsoMatch FarmCentre and Kverneland ServiceCentre.

GEOFENCING Protect your implement against theft with GEOFENCING and a backup battery, ensuring localization even when the implement is not connected to a tractor.

Task Management Enhance reporting and transparency with real-time tracking, performance measurement, and secure data storage in IsoMatch FarmCentre. Perfect for managing logistics and invoicing in machine cooperations.

Kverneland ServiceCentre Minimize downtime with remote diagnostics via Kverneland ServiceCentre, enabling technicians to quickly resolve electronic issues from a distance.

Kverneland Global 3 A precision GPS antenna delivering 30–50cm DGPS accuracy for guidance, section control, and advanced farming - boosting efficiency and minimising overlap.

KVERNELAND ts-drill

TRANSPORT

SAFE ON THE ROAD

EASY TO CONVERT

Easy conversion from working to transport position.

The threepart hydraulic folding gives a transport width of 3.00m and ensures smooth running and safe road transport. Lighting equipment is optional available.

KVERNELAND ts-drill

Drilling flexibility from the tine seeder

"I Looking for a more versatile drilling solution to cope with changing weather patterns, Spilsby, Lincs-based RH-J (Farms) opted for a 6m ts-drill, from Irelands Farm Machinery. “We had a couple of seasons where we had little option but to reach for our 4m power harrow drill combination to get crops in, instead of our 6m drill of choice,” explains farm manager Mark Blows, pictured with farm owner Alistair Hall- Jones. “Failing to drill our crops is not an option, so we decided to find a flexible and versatile solution that could operate in less than ideal conditions.” RH-J (Farms) grows winter and spring wheat, winter and spring barley, oilseed rape, sugar beet, spring beans and forage maize across 1,600 acres. An on-farm AD plant consumes forage maize in exchange for digestate.

“We plough for sugar beet and forage maize, but use a flat lift and either a carrier or NZ-type cultivator for everything else,” he says. “Then the ts drill can go straight in. It’s a very simple and straightforward process that has reduced establishment costs while gaining output.” Mark says that the Kverneland tine seeder (ts-drill) has been something of a saviour for the Lincs family farming business, but adds that you have to look beyond the finish that the drill leaves behind.

KVERNELAND ts-drill

PARTS & SERVICE

ORIGINAL PARTS & SERVICE

LET’S FOCUS ON YOUR BUSINESS

KVERNELAND ts-drill

PARTS & SERVICE

MYKVERNELAND

SMARTER FARMING ON THE GO

A personalised online platform tailored to your machine needs With MYKVERNELAND you will benefit from easy access to Kverneland’s online service tools. Receive first hand access to information on future developments and updates, operator and spare part manuals, FAQs and local VIP offers. All information is gathered in one place.

KVERNELAND ts-drill

TECHNICAL DATA

TECHNICAL DATA Model

ts-drill 4800

ts-drill 5000

ts-drill 5600

ts-drill 6000

Working width (m) Transport width (m)

4.80

5.00

5.60

6.00

No. of coulters (12.5cm distance) No. of coulters (15.0cm distance) Min. power requirement (HP/KW)

38 32

48 40

40 (14cm) 130 / 96

120 / 88

125 / 92

140 / 96

Weight (kg)

1,805

1,850

1,930

1,980

Hopper Hopper capacity (l)

1,350

Hopper extensions (max. 1,700l) (l) Hopper cover plus gas pressure regulator Quick emptying chute Low level sensor Lighting hopper inside Metering section Mechanical fan drive Hydraulic fan drive Fan speed control ELDOS electric metering device incl. 5 rotors

(350)

Metering device control Seed rate adjustment Seed quantity (min. / max.) (kg/ha)

1-400

Tramlining system with e-bas or e-com eletronic steering Shut-off valves for tramlines

Pre-emergence marker Electr. half-width shut-off Radar speed sensor Calibration kit

KVERNELAND ts-drill

TECHNICAL DATA

Model

ts-drill 4800

ts-drill 5000

ts-drill 5600

ts-drill 6000

Track eradicator reversible tip (1 set) Following harrow: 2 rows precision S-type (ø 8mm) Press wheels (380 x 50mm) incl. 1 row V type harrow (ø 10mm) Hydraulic clod board Straight tines

Narrow XHD tines Central landwheel Lateral control wheel

2 x 11.5/80-15.3 (10PR) 2 x 20.5x8.0-10 (6PR)

Lighting equipment transport

Standard equipment Option

— Not available

Rotor 1 for high rate cereals

Rotor 2 for grass or similar

Rotor 3 for rape and small seeds

Rotor 4 for low rate cereals

Rotor 5 for maize, sunflowers and greening seeds

Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute basis for any legal claim against Kverneland Group. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group reserves the right at any time to make changes to the design or specifications shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary, e.g. for maintenance purposes, please contact proper assistance or supervision of a technical assistant. © Kverneland Group Soest GmbH

KVERNELAND ts-drill

KVERNELAND ts-drill 09.2025

WHEN FARMING MEANS BUSINESS kverneland.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28