Brochure Satio/Satio F

SPEED UP - WHEN THE TIME IS RIGHT UNIVERSAL PNEUMATISCHE SOLOSÄMASCHINE PNEUMATIC SOLO SEED DRILL Satio

WHEN FARMING

MEANS BUSINESS

Realising the full potential of farming is about growing and developing your business, not only your crop or livestock, but also your profit. Improve productivity and profitability by focusing on the positives and minimising disadvantageous aspects, through strong, dedicated management. Success springs from determination and clear targets, from laying down the appropriate strategy and allocating correct investments for the future. Quality results require the right ideas and equipment. When there is work to be done, you need the optimal setup and smart solutions that support you towards an easier, more profitable way of working. You need solutions that make tough and demanding conditions less complicated.

KVERNELAND SATIO

The iM Farming logo appears when the implement can be connected to our smart farming systems and accessories, essential for managing your business.

Effective sowing means speeding up when the soil is exactly right, in order to give your crop a head start. SOW

KVERNELAND SATIO

ARABLE TILLAGE SYSTEMS

YOUR KVERNELAND

INTELLIGENT FARMING SOLUTIONS

Choose the best farming solution for you and your land. Combine the highest possible yields with sustainability. This will start with the correct tillage. The choices you make depend on various factors and should match your specific circumstances, like soil structure, crop rotation, residue management, economic and ecological viabilities.

The choice is yours!

You must consider environmental and legal issues. From conventional methods to conservation tillage: the balance of operations at the right time has to be found to achieve high yields with the best soil condition (air, moisture, biological activity, etc.) with a minimum amount of energy, time and investment. For this, Kverneland offers a full range of intelligent farming solutions.

CONVENTIONAL TILLAGE

CONSERVATION TILLAGE

Conventional Tillage • Intensive method of cultivation

Mulch Tillage • Reduced intensity in terms of depth and frequency • More than 30% of residues are left on soil surface • Extended repose period of the soil • Cultivator and/or discs incorporate the crop residues within the top 10cm of soil for stable bearing soil • Full-width tillage - seedbed preparation and seeding in one pass • Protection against soil erosion; reduce soil loss by run-off and improve water storage capacity. • Improvement of soil moisture retention

Strip Tillage • Zonal strip loosening before or during seeding of up to 1/3 of the row width (Loibl, 2006). Up to 70% of the soil surface remains untouched • Strip-till combines the soil drying and warming benefits of conventional tillage with the soil-protecting advantages of no-till by disturbing only the area of the soil where the seeds are placed • Exact fertilising deposit • Soil protection against erosion and drought

Vertical Tillage / No-Till • Extensive method • Working soil vertically avoids additional horizontal layers or density changes • Increasing water infiltration, root development and nutrient take-up • Plants’ roots dictate the overall health of the plant, as they deliver nutrients and water throughout the season, contributing to a higher yield • A strong set of roots make plants more

• Complete soil inversion e.g. by a plough • Less than 15-30% crop residues left on soil surface • Seedbed preparation done by an active tool or special seedbed harrow • High phytosanitary effect by reduced pressure of weed and fungi diseases - fewer herbicides and fungicides needed • Better dry-off and faster increase of soil temperature for better nutrients absorbation

resistant to wind and drought. • Lower energy input required

KVERNELAND SATIO

ARABLE TILLAGE SYSTEMS

KVERNELAND SATIO

The Kverneland Satio provides cost-efficient technology essential for high yields through precise seed placement. Farmers face challenges like uncertain legal situations, unpredictable weather, the need for herbicide reduction, emerging weed resistance, and rising input and energy costs. The Satio solo seed drill operates independently of seedbed preparation, allowing targeted seeding at the optimal time to achieve the best growing conditions. For example, winter barley benefits from a well-settled seedbed. By focusing solely on sowing, the Satio enables higher speeds and shallower seed placement, extends the time window, and reduces peak working times. This approach requires less power, minimizes soil compaction, reduces tractor tracks, and lowers fuel consumption. The right time and the placement with the CX-II coulter ensures in the prepared seedbed minimal soil disturbance, enhancing mechanical weed control and insect management for optimal results.

EFFICIENT

PERFORMANCE

INTELLIGENT

PRECISION

KVERNELAND SATIO

SATIO F

SATIO F - THE FOLDABLE SOLO SEED DRILL HIGH EFFICIENT WITH CAPACTIY

The seed hopper of the foldable Satio F models (5.00 and 6.00m working width) offers a large capacity of 1,700l. The electric driven ELDOS metering system (1-400kg/ha) in e-com or e-bas version offers maximum comfort. A radar speed sensor records the speed in order to maintain the relevant distribution rate at the correct time. The Satio F in the e-com version is fully ISOBUS comfortable. The CX-II coulters are clamped to the coulter bar and enable the choice row spacings of 12.5cm or 25cm to adapt to individual farming systems (crop care management, power requirement, weed type and pressure, limited climate factors, seed type, soil conditions etc.). The coulter pressure is adjusted mechanically using a crank or can optionally be controlled hydraulically from cab. Press wheels are supporting the fine adjustment of the sowing depth and increase soil to seed contact for fast emergence. To increase comfort, the sowing depth of the Satio F models is centrally adjusted via spacers as standard. The spacers are on both sides of the headstock and adjust the height of the depth wheels. The value displayed on the scale of the spacers indicates the pointer position. The pointer is adjusted via top-link of the tractor to ensure an even sowing depth of front and rear coulters.

A full range of options like pre-emergence markers, S-tine following harrow, road light kit, LED working lights are available to customise to individual needs.

Independent sowing from cultivation

Compact design with closed centre of gravity requires low power requirement

KVERNELAND SATIO

SATIO F WITH ELDOS

OPTIMUM SEED RATE WITH ELDOS

AUTOMATIC AND SAFE

ELDOS is the electric driven metering device for Kverneland pneumatic seed drills. It is state-of-the-art technology for perfect seed placement.

ELDOS is steered by Kverneland e-com or e-bas software. The e-com version is fully ISOBUS compatible . By the automatic section control, GEOCONTROL, the metering device stops/starts automatically. Double and/or missed seeding on headlands or odd-shaped fields is avoided. Special sensors ensure complete functionality from the tractor cab. The e-bas system includes the basic electronics to run and monitor the machine functions via the Focus 3 terminal. The e-bas system controls the ELDOS metering device, the tramlining, the hectare metre and fan speed control.

Self-controlled and fail-safe.

For even more precision, connect implement with an ISOBUS terminal. Kverneland Tellus 1200 the ISOBUS terminal with up to four fully customizable touch screens.

Calibration is automatic, and a range of interchangeable seed metering rotors can be swapped - even when the hopper is full - without the need for tools. Sensors monitor the metering rotors and the calibration flap and give a warning if the wrong metering rotors are accidentally installed or the flap is not closed.

A calibration bag and set of digital scales are supplied as standard.

Rotor 1 for high rate cereals

Rotor 2 for grass or similar

Rotor 3 for rape and small seeds

Rotor 4 for low rate cereals

Rotor 5 for maize, sunflowers and greening seeds

KVERNELAND SATIO

METERING DEVICE ELDOS

•Easy exchange of rotors

• Five rotors for all sorts of seeds and fertiliser

•Self-monitoring system

•Application rates from 1-400kg/ha (depending on working width and speed)

•Simple and automatic calibration

SATIO

KVERNELAND SATIO

SATIO

SATIO - THE RIGID SOLO SEED DRILL COMPACT AND LIGHTWEIGHT

The Kverneland Satio is the optimal choice for small and medium-sized farms and is characterised by its compact and lightweight design. The close centre of gravity allows low power requirement from 54kW. Working widths of 3.0 and 4.0m are available. The hopper of the Satio has a low filling height and offers a capacity of 750 litres which can be extended to 1,000 litres. The wheels run in the track of the tractor ensuring constant ground contact and drive the mechanical metering devise. They can be easily adjusted to suit any track width. Track eradicators loose the tracks before the seeds are placed. The mechanical metering offers seed rates from 2 to 380kg/ha. For the electronic control of the Kverneland Satio, the FGS and Signus systems are available. Therefore, only two single-acting control valves are required to steer the fan drive and track markers.

Equipped with clamped CX-II coulters the sowing depth can be adjust at each press wheel setting or via the coulter pressure adjustment. The S-tine following harrow provides the correct covering.

Signus

FGS

KVERNELAND SATIO

SATIO MECHANIC METERING DEVICE

MECHANICAL METERING DEVISE THE SYSTEM IN DETAIL

The central metering device accurately measures any desired volume of seed from 2kg/ha to 380kg/ha.

For the sowing of fine seeds, e.g. rape or grass, the metering device can be infintely adjusted to fine seed/micrometering by means of a spindle, without any need for tools.

The central, totally enclosed cell wheel of the metering device accurately measures the required volume of seed and discharges it into the venturi cone where it is mixed with the air stream and then conveyed through the diffusor tube and the seed delivery hoses to the coulters. The diffusor tube with the distributor is located protected inside the hopper and ensures precise diagonal distribution.

No tools required for adjustments

Setting for normal seed

Setting for fine seeds, with rotary brush

KVERNELAND SATIO

METERING DEVICE

Tramline valve

Distributor

Seed hopper

Corrugated tube

Seed tubes to the coulter

Fan

Conveyor pipe

KVERNELAND SATIO

1) Satio F good access to the ELDOS 2) Satio F LED working light 3) Satio F radar speed sensor 4) Satio F low level sensor (3 steps) 5) Satio F electric half-width shut-off, distribution head with 135mm tube, up to 8 shut-off valves) 6) Satio & Satio F: Option to change the track width 7) Satio & Satio F: Option road light kit for good visibility 8) Satio & Satio F: Option of pre-emergence marker 9) Satio distribution head with 100mm tube, up to 8 shut-off valves) 10) Satio low level sensor 11) Satio calibration flap underneath the mechanical metering device close automatically by starting the fan

10)

11)

KVERNELAND SATIO

ADJUSTMENT

USER-FRIENDLY ADJUSTMENTS

FOR PERFECT SOWING DEPTH

The Satio models are easily adjusted without tools to all soil conditions. This adaptability ensures efficient and convenient operation in diverse agricultural environments.

The sowing depth of the foldable models can be adjusted centrally via spacers without any tools. The value at the scale which can be changed by spacers must match with the scale value of the pointer adjusted via the top-link of the tractor to ensure an even sowing depth. In additon the Satio F and the sowing depth of the rigid Satio is adjusted at each coulter if a press wheel is available and/or with the central coulter pressure adjustment. The standard coulter pressure is adjusted mechanical via crank. An optional hydraulical version on the Satio F provides flexibility and customization according to soil specific operational needs. For reduce impact on the soil, the track-width is adjustable and the integrated track-eradicator loose the tractor and seeder tracks. The position of the mechanical metering device or ELDOS is designed for convenient and ergonomic access. This facilitating easy rest emptying and cleaning of the hopper. A protective toolbox with rotors, scale and calibration equipment is always to hand. An adjustable low level sensor can be set from the outside.

The pressure and height of the optional following harrow is adjusted by using a crank. The scale allows easy control, even if the complete harrow is lifted up. To adapt the agressiveness of the work, the angle of the tine segments can also be changed.

The pressure and height of the S-tine following harrow are adjusted using a crank. The angle can also be modified to customize the aggressiveness of the operation. The coulter pressure can be easily adjusted using a crank. Optionally, on the Satio F model, hydraulic adjustment is available. No additional tools needed.

KVERNELAND SATIO

Precise smooth running The 325mm steel disc and the flat

profile disc angle of 5.4° creates a narrow furrow which reduce power requirement.

User-friendly The CX-II coulter is completely maintenance free and very easy to set-up. A pre-loaded spring ensures an optimum penetration with up to 50kg. Optimum seed-to-soil contact The press wheels (Ø 250mm x 42mm) can be set in flexible or fixed position or can be lifted out of work depending on soil conditions. A scraper is available for sticky soils. Adjustment of seed depth The seed depth adjustment can be controlled centrally via spacers (Satio F), by the coulter pressure and individually at each coulter by hole/ pins system of the press wheel setting. Maximum clearance The coulter staggering of 445mm guaranties save soil flow even with higher rates of residues.

row distances 12.5 OR 25cm

CX-II COULTER

FOR PERFECT SEED PLACEMENT

The CX-II coulters, with or without press wheels, are clamped to the coulter bar which enables to change the row spacing. From factory a pre-setting of 12,5 or 25cm is offered. The CX-II coulters are staggered in two rows and ensuring a precise application. The flat cutting angle of the steel disc requires less coulter pressure to reach a constant sowing depth of up to 6cm and ensures smooth running. Thanks to the combination of steel disc and flexible plastic disc, there is no need for independent scrapers. The coulter is completely maintenance free!

Good penetration with less force

For wet and sticky soils, CX-II coulters without press wheels are available. The special curved disc design provides sufficient bearing capacity. Additional weight is saved and makes it cost-efficient.

Press wheels increase seed-to-soil contact and support the fine adjustment of the sowing depth. The depth adjustment is carried out without using any tools. Three adjustments adapted to soil condition guarantee perfect seed placement. For level and even ground it can be set in the fixed position. In cloddy or stony conditions it is set in the flexible position to ensure smooth running and a perfect ground following. In extreme wet conditions the press wheel can be lifted out. On slightly sticky soils an optional scraper is recommended.

The sowing depth at the CX-II coulters can be finely adjusted with a pin, offering 15 settings on the Satio and six on the Satio F. The Satio F also includes a central depth setting for enhanced precision.

Fixed

Flexible

Lifted

Clamped CX-II coulter

With press wheel

KVERNELAND SATIO

IM FARMING

ISOBUS

EASY ADJUSTMENTS

With ISOBUS compatibility, all hydraulic settings, including the ELDOS metering device (calibration,seed rate) can be adjusted on the go using the ISOBUS terminal. The driver has a comprehensive view of all settings and can monitor them during the sowing process. The Satio F requires one single-acting valve for the fan drive and three double-acting (DA) valves for track markers, folding, and hydraulic coulter pressure adjustments. These functions can be controlled from cab. Thanks to the ISOBUS functionality, they can be managed via the ISOBUS terminal.

Tellus 1200 - Multiple Screens, Even More Options Tellus 1200 the 12-inch universal Terminal offers intelligent hopper monitoring and precise variable rate application for fertiliser and seed. With an intuitive interface, multi-screen functionality, and GEOCONTROL compatibility, it delivers smart, all-in-one control beyond standard tractor systems.

Tellus 700 - Single Screen, Multiple Options Tellus 700 simplifies precision farming with smart features, custom mapping, and a user-friendly design. With ISOBUS compatibility and flexible packages, it boosts in-field efficiency and control.

Satio F functions steered with the ISOBUS terminal: • Folding, unfolding • Coulter pressure • Track marker arms • ELDOS metering device Compatible with all ISOBUS terminals.

The best overview in farm management

IsoMatch FarmCentre is a cloud-based farm management tool that works seamlessly with Tellus 700 and Tellus 1200 terminals. It allows you to monitor machine activity, send tasks remotely to the terminal, and access real-time data and job reports - anytime, anywhere for smarter, more efficient farming.

iM FARMING - smart, efficient, easy farming

All connections, whether hydraulic, ISOBUS or electric, are easily accessible and clearly arranged on the headstock.

KVERNELAND SATIO

FOCUS 3

ECONOMIC CONTROL SOLUTION

The Focus 3 terminal runs the e-bas system to control all basic electronic functions of the machines such as the ELDOS metering device, the hopper low level sensor and various tramlining systems. Focus 3 is not ISOBUS compatible and does not support GPS signals or applications. It displays information such as hectares, km/h, and fan speed on an easy-to-read digital screen. The Focus 3 also includes a full diagnostic function for testing machine sensors and outputs.

Kverneland Global 3 A precision GPS antenna delivering 30–50cm DGPS accuracy for guidance, section control, and advanced farming - boosting efficiency and minimising overlap.

NEW Kverneland Sync – the Implement Gateway Always Connected – Easy and Direct

iM CALCULATOR APP FREE TO DOWNLOAD

With Kverneland Sync, your implement stays connected to Kverneland online services, ensuring efficient, user-friendly data transfer to IsoMatch FarmCentre and ServiceCentre.

With GPS it is possible for the farmer to accurately seed, spread and spray without any overlap. The iM Calculator app calculates the cost saving by using those GPS functionalities . The iM Calculator app for tablets is free to download from the App Store or Google Play. Please find the online calculator on our homepage: http://imcalculator.kvernelandgroup.com/#/

GEOFENCING Protect your implement against theft with GEOFENCING and a backup battery, ensuring localization even when the implement is not connected to a tractor.

Task Management Enhance reporting and transparency with real-time tracking, performance measurement, and secure data storage in IsoMatch FarmCentre. Perfect for managing logistics and invoicing in machine cooperations.

Remote Service Minimize downtime with remote diagnostics via ServiceCentre, enabling technicians to quickly resolve electronic issues from a distance. See how it works on YouTube.

Save seeds and money!

KVERNELAND SATIO

PARTS & SERVICE

ORIGINAL PARTS & SERVICE

LET’S FOCUS ON YOUR BUSINESS

KVERNELAND SATIO

PARTS & SERVICE

MYKVERNELAND

SMARTER FARMING ON THE GO

A personalised online platform tailored to your machine needs With MYKVERNELAND you will benefit from easy access to Kverneland’s online service tools. First hand access to information on future developments and updates, Operator and spare parts manuals, FAQs and local VIP offers. All info gathered in one place.

KVERNELAND SATIO

TECHNICAL DATA

TECHNICAL DATA Model

Satio

Satio F

Maschine type

Satio 1030

Satio 1040

Satio 1050 F

Satio 1060 F

Frame

mounted

mounted foldable

Working width (m) Transport width (m) Hopper capacity (l) Hopper extensions (l) Quick emptying chute Low level sensor Linkage top

3.0 3.0

4.0 4.0

5.0 3.0

6.0 3.0

750

1,700

250

CAT II / CAT III

Linkage low Wheel type

CAT II / CAT III N / CAT III

26x12.00

Metering device & Tramline system Drive 1000 rpm Drive 540 rpm Hydraulic fan drive ELDOS electric driven metering device (no.)

- -

(1)

Radar speed sensor

Mechanic metering device (no.)

(1)

Micro metering e-bas electronic (Focus 3)

- -

e-com electronic (Tellus 1200/Tellus 700)

FGS - Tramline system Signus - Tramline system Metering device control Seed rate adjustment Seed quantity (min. - max.) Shut-off valves for tramlines ⌀ Distribution tube (mm) Electric half-width shut-off Mechanic half-width shut-off

- -

2 - 380kg/ha

1 - 400kg/ha

100

135

Pre-emergence marker

KVERNELAND SATIO

TECHNICAL DATA

Model

Satio

Satio F

Maschine type

Satio 1030

Satio 1040

Satio 1050 F

Satio 1060 F

Frame

mounted

mounted foldable

Working width (m)

3.0

4.0

5.0

6.0

Coulters & adjustments No. of coulters 12.5cm distance (no.) No. of coulters 25cm distance (no.)

(24) (12)

(32) (16)

(40) (20)

(48) (24)

CX-II coulter incl. press wheel CX-II coulter special disc shape without press wheel CX-II coulter disc Ø (mm)

325

Press wheel Ø (mm)

250 x 42

Coulter pressure CX-II disc coulter (kg)

5 - 50

Mechanic coulter pressure adjustment by crank Hydraulic coulter pressure adjustment

- -

Mechanic central seed depth setting

Others S-tine following harrow (10mm) Track eradicator Calibration kit Toolbox Hydr. folding track marker with notched disc Loading step / Platform LED working lights Road light kit Oil charge hydr. fan 4400 U/min (l/min)

Sync

Min. power requirement (HP/kW)

73/54

98/72

122/90

146/108

Weight (kg)

780 - 1260

880 - 1450

1370 - 2160

1450 - 2350

Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute basis for any legal claim against Kverneland Group. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group reserves the right at any time to make changes to the design or specifications shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary, e.g. for maintenance purposes, please contact proper assistance or supervision of a technical assistant. © Kverneland Group Soest GmbH Standard equipment Option - Not available

KVERNELAND SATIO

KVERNELAND SATIO 09.2026

WHEN FARMING MEANS BUSINESS

kverneland.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24