KVERNELAND PICK-UP
Galvanized strippers.
2.3m extra wide pick-up • Five tine bars with 34 tines per bar and close 60mm tine spacing. • Each tine bar is supported by four ball bearings along its length. • Twin easy access cam tracks located at both ends of the pick-up. • Large diameter roller crop press for increased intake speeds. • Innovative inboard driveline design for reduced transport width. • Robust ¾” spec HBC drive chains
2.0m pick-up (EasyFeed intake) • Four tine bars each supported on three ball bearings • Close 60mm tine spacing • Innovative inboard driveline design for reduced transport width • Roller crop press for efficient crop flow • Robust ¾” HBC spec drive chains
Hydraulic pick-up lift with integrated suspension system for accurate ground following.
Compact internal drive system The Kverneland Densus pick-up features a patented internal drive system. This offers multiple advantages compared to conventional systems: • Overall width is reduced as the drive sprocket is contained within the guide flares, so manoeuvrability is improved and risk of pick-up wheels interferance with side obstacles is reduced. • The twin cam tracks are located on the outside of the pick-up frame, allowing for easy access to both the cam itself and the cam follower bearings. • The large diameter drive sprocket results in reduced wear potential compared to externally separated mounted sprockets. • There is no ‘dead area’ at the outside of the pick-up to potentially restrict crop flow. • The crop centralizing augers are driven on the same principle than pick-up transmission, using the internal drive chains. Pick-up sides are clean of any carters and transmission, avoiding any crop pollution and risk of mechanical damages, while maintenance is reduced to the very minimum.
Generous flotation tyres with simple height adjustment.
VARIABLE CHAMBER BALERS
9
Powered by FlippingBook