Kverneland rotopresse camera fissa

NAME PRODUCT BROCHURE SUBLINE FIXED CHAMBER BALERS 6250 PLUS/6350 PLUS/FLEXIWRAP

SECTION OR VISION

WHEN FARMING

MEANS BUSINESS

Realising the full potential of farming is about growing and developing your business, not only your crop or livestock, but also your profit. Improve productivity and profitability by focusing on the positives and minimising disadvantageous aspects, through strong, dedicated management. Success springs from determination and clear targets, from laying down the appropriate strategy and allocating correct investments for the future. Quality results require the right ideas and equipment. When there is work to be done, you need the optimal setup and smart solutions that support you towards an easier, more profitable way of working. You need solutions that make tough and demanding conditions less complicated.

FIXED CHAMBER BALERS

SECTION OR VISION

BALE

As a professional engaged in baling and wrapping, you pride yourself on providing the best result for your customers. The need to satisfy ever increasing demands, while simultaneously improving the quality of the job being carried out is a given.

FIXED CHAMBER BALERS

SECTION OR VISION

FIXED CHAMBER BALERS

KVERNELAND 6250 AND 6350 PLUS SERIES

HIGH OUTPUT, HIGH PERFORMANCE KVERNELAND 6250 & 6350 PLUS SERIES

Bale Production on a New Level Knowledge from many years experience in the baler business are incorporated into the latest Kverneland 6250 & 6350 Plus series fixed chamber balers. Their optimized design provides unrivalled bale quality, superb output and outstanding reliability. The production of high quality bales is key to efficient operation. Experienced professionals appreciate that well formed, dense bales don’t just look good, but they are better to wrap, stack and transport, giving benefits all the way down the line, maximising forage quality and feed value of valuable crops.

Cost effective and profitable

FIXED CHAMBER BALERS

KVERNELAND PICK-UP

CLEAN RAKING PERFORMANCE IN ALL CROPS

High capacity Pick-Up Wide 2.2m low profile pick-up provides clean raking performance at the highest working speeds in even the toughest of working conditions. Renewned reliability Despite their outstanding performance, Kverneland 6000 Plus series pick-ups have a strong reputation for reliability, which has now been further enhanced with an upgraded driveline. With a superior specification compared to competitive machines, Kverneland set new standards for performance: Each tine bar is supported on multiple bearings, while all 2.2m pick-ups feature twin cam tracks – a truly great combination that gets your crop off the ground with minimal maintenance during long working days. Compact transport width No need for the pick-up wheels to be removed or folded for transport, Kverneland’s unique compact internal drive system is a smart solution that reduces unproductive time between jobs.

Re-designed large diameter roller crop press facilitates crop flow at high intake speeds.

FIXED CHAMBER BALERS

KVERNELAND PICK-UP

2.2m Pick-up.

Patented internal drive system.

Large diameter easily adjustable guide wheels.

New upgraded ‘PLUS’ series specification includes: • 10mm longer pick-up tines • Wider galvanised strippers • 3/4” HBC Specification drive chains giving a boost to performance in heavy conditions 2.00m wide pick-up (Fork feeder model) • Four tine bars each supported on three ball bearings • Extra close 60mm tine spacing • Innovative inboard driveline design for reduced transport width • Crop deflector for efficient crop flow • New ¾” HBC Spec drive chains 2.2m extra wide pick-up (Rotor intake & double fork feeder models) • Five tine bars with 32 tines per bar • Each tine bar supported by four bearings along its length • Cam track located at both ends of the pick-up • New Plus series redesigned crop press with internal bearings and stronger side arms • Innovative inboard driveline design for reduced transport width. • No need to remove pick-up wheels for road transport • New ¾” HBC Spec drive chains

Clean raking performance in all crop.

FIXED CHAMBER BALERS

KVERNELAND INTAKE

EFFECTIVE INTAKE

SUPERIOR CAPACITY

Kverneland 6250 Plus Series – mixed chamber models are available with a choice of Fork Feeder or PowerFeed intake rotor. Kverneland 6350 Plus Series – full roller models are available with a choice of PowerFeed or Supercut intake systems.

Fork feeder.

Choice of Intake Systems With a variety of intake systems available, you can be sure there is one ideally suited to your workload. Each intake option has been perfectly matched to ensure optimum feeding of crop to the bale chamber to maximise capacity and enhance the bale formation process. Fork Feeder Intake System 6250 Plus models can be specified with a cost efficient fork feeder intake system. This provides direct feed transfer into the bale chamber. The wide opening allows high intake intake capacity, while also providing gentle handling of leaf loss sensitive crops.

FIXED CHAMBER BALERS

KVERNELAND INTAKE

Parallelogram DropFloor system for faster unblocking PowerFeed and SuperCut intake systems are equipped with the super effective Kverneland Parallelogram drop floor system*, which brings faster and easier clearing of block- ages. The system not only lowers the rear edge of the drop floor as per traditional systems, but also lowers the front section of the floor, where a blockage is more likely to occur.

PowerFeed Rotor Intake for Ultimate Capacity The Kverneland PowerFeed intake rotor provides huge feed capacity, handling both wet and dry crops in all conditions. The PowerFeed rotor with its 14 fully guided rotor tines forces crop into the bale chamber for higher intake speeds and provides instant bale rotation. SuperCut-14 The SuperCut-14 knife chopping system provides fast and efficient crop flow into the baler. With a chop length of 70mm it is the ideal solution for producing tight, dense bales, for improved fermentation and easier feeding with less wastage. Each individual knife is spring protected against foreign obstacles, with automatic reset. SuperCut-25 The SuperCut-25 knife pre-chopping system with a chop length of 40mm provides the ultimate solution for maximising silage quality. Group selection with choice of 25, 13, 12, 6 or 0 knives, gives maximum flexibility of operation. Dual Action Knife Protection The SuperCut-25 knife system is equipped with dual protection against obstacles. If a small obstruction hits a knife, it can pivot backwards without losing cut quality. If a larger obstacle is encountered, the knife pivots downwards, automatically resetting afterwards.

PowerFeed intake system.

Easier removal of all blockage types = More time baling

Drop Floor in working position.

SuperCut-14.

Drop Floor in mid position.

SuperCut-25.

Drop Floor in fully lowered position.

(*) Not available on 6250 Plus F & 6250 Plus R

FIXED CHAMBER BALERS

KVERNELAND DRIVELINE

DRIVELINE

FOR THE TOUGHEST CONDITIONS

6000 ‘PLUS’ series – designed for the toughest conditions Drive to the bale chamber is by oversize 1¼’’ chain which provides higher fatigue strength & increased wear resistance. Bale chamber driven rollers feature cast bearing housings and are greased from four handily positioned grease banks.

Efficiency and Performance are Unmatched

Steel hydraulic pipes for ultimate reliability Every step has been taken to maximise reliability. Rubber hoses have been eliminated from the hydraulic system wherever possible and replaced with steel pipes for ultimate durability. Automatic chain lube for extended life Correct lubrication of chains is crucial to extended lifetime. Kverneland PLUS series balers are equipped with an automatic system supplying oil to each individual chain. The system is equipped with a generous four litre capacity tank, while the quantity of oil delivered to each outlet can be individually fined tuned to vary the amount of oil provided.

Steel pipes for ultimate durability.

FIXED CHAMBER BALERS

KVERNELAND DRIVELINE

In todays world no-one can afford downtime. In a busy baling season timeliness is everything. To guarantee the lowest possible running costs, the Kverneland engineering team have boosted durability to new levels.

FIXED CHAMBER BALERS

KVERNELAND POWERBIND

POWERBIND:

GREAT LOOKING BALES – TIME AFTER TIME

Easy access storage for net and twine for long working days.

The PowerBind net wrap system spreads the net past the edge of the bale.

Storage for up to eight balls of twine.

Fast Acting Net Cycle Kverneland Plus chamber balers are equipped with the patented front mounted PowerBind net system. PowerBind eliminates troublesome feed rollers and has market leading cycle time. Minimum Time Stationary – Maximum Time Baling The net is continuously retained in the PowerBind injection arm. When the bale is 90% complete the arm moves forward ready for the net injection. When the bale is 100% complete net is fed directly onto the bale in a flat movement angle keeping the net tight at all times, providing accurate and extremely reliable net injection. PowerBind gives you the confidence of doing a professional job, without influence from wind or crop build-up.

FIXED CHAMBER BALERS

KVERNELAND POWERBIND

Low Net Loading Height PowerBind offers very low loading height for maximum convenience and time saving. To replace the empty roll just swing out the shaft and slide on a new roll.

Twine tying Double tube fast acting system. Simultaneous binding of both edges with crossing over of twines in the centre of the bale avoiding loose ends. Fully user programmable, enabling production of the best looking bales in all crop conditions.

The very low loading height and the very easy threading of the system mean minimum downtime and maximum time baling.

FIXED CHAMBER BALERS

KVERNELAND CONTROL

IN COMFORT SETTING AND CONTROL

Easy to Use Control Systems Kverneland 6200-6300 Plus Series balers feature a simple to use control system designed to make long working days as relaxing as possible. Clear colour screen displays with simple graphics show baling information at a glance, with all important settings made from the comfort of the tractor seat. Focus 3 Designed for easy operation with the following functions operated from the terminal: • Bale density adjustment

• Left & Right driving indication • Selection of net or twine tying

• Net and twine quantity adjustment • Tying information during tying cycle • Selection of manual or automatic tying • Five daily bale counters & total bale counter • Selection of knives, drop floor or pick-up (when present) ISOBUS (option) All models can be optionally specified with full ISOBUS compatibility for direct connection to an ISOBUS tractor, enabling the baler to work through the tractor terminal. In addition to direct connection to the tractor, ISO specified machines can also be supplied with either Tellus GO+ or IsoMatch Tellus Pro touch screen terminals.

Focus 3 terminal

Knife, drop floor & pick-up selection

Bale density adjustment

Bale growth indicator

Net quantity adjustment

6 5

Daily bale counter

Selection of net or twine tying

FIXED CHAMBER BALERS

KVERNELAND CONTROL

Tellus GO+ terminal.

IsoMatch Tellus terminal.

IsoMatch Tellus GO+* – Compact ISOBUS terminal IsoMatch Tellus GO+ is a full ISOBUS terminal. The compact design makes it easy to integrate in the tractor cab. Tellus GO+ is equipped with a 7-inch touch screen with hard keys combined with a rotary switch for direct access to main functions. IsoMatch Tellus Pro terminal* The IsoMatch Tellus Pro is a virtual terminal combining two Interface screens in one terminal. The 12” touch screen offers ergonomic use and is designed for clear viewing during long days of operation. With an ever increasing number of functionalities, such as rear view cameras, the Tellus Pro terminal allows the baler interface to be viewed in the top screen, with a camera display to monitor finished bales active in lower part.

(*) These fully ISO terminals can be fitted on variable chamber balers, provided units are factory ordered with ISOBUS compatibility option.

IsoMatch (Multi)Eye IsoMatch Eye and MultiEye are accessories for connecting up to four cameras to any IsoMatch terminal.

FIXED CHAMBER BALERS

SECTION OR VISION

COST EFFECTIVE and profitable

FIXED CHAMBER BALERS

KVERNELAND 6000 PLUS SERIES

PROFITABLE INVESTMENT KVERNELAND 6200-6300 PLUS SERIES

Decades of experience designing machines to perform all over the world go into building every Kverneland baler. The latest generation of Kverneland fixed chamber balers give you the assurance of unrivalled performance and an ability to cope with a wide variety of crop conditions. With an emphasis on high output and long lasting, reliable performance, a Kverneland fixed chamber baler will be a cost effective and profitable investment for your business.

The Product Range:

Kverneland 6250 Plus RotaMax: Rollers and Chain & slat bale chamber for excellent crop handling in all conditions. Bale diameter 1.25m

Kverneland 6350 Plus PowerMax: Full roller bale chamber concept designed

for heavy silage bales. Bale diameter 1.25m

FIXED CHAMBER BALERS

KVERNELAND 6250 PLUS

FIXED CHAMBER BALERS

KVERNELAND 6250 PLUS

ROTAMAX MIXED CHAMBER

– MULTI-CROP FLEXIBILITY

Bale Size of 1.20 x 1.25m The Kverneland 6250 Plus has a bale chamber designed with five rollers in the front section of the bale chamber and chain and slats in the tailgate. This combined solution gives excellent crop handling in all conditions with consistent, high density bales in both wet and dry material. Rear Chains for Dense Core of the Bale The chain and slat system in the rear section gives an early and 100% regular bale rotation and hence faster bale formation leading to a denser core of the bale, even when working in very dry crops.

Rigid steel pipes for hydraulic circuits.

Main bale chamber drives are by heavy duty 1 ¼ ” pitch chain for a longer lifetime and reduced maintenance.

The RotaMax multi-crop bale chamber

.. and chain and slats in the tailgate.

The bale chamber concept consists of five rollers at the front…

RotaMax Bale Chamber: Roller front section with chain & slat tailgate for excellent low loss crop handling and reliable bale rotation even in the driest conditions.

Wellshaped and very tight bales

Front Rollers for Excellent Bale Finish and High Density The heavy duty rollers in the front section ensure a well- shaped and very tight bale. Reduced Crop Losses The tailgate section with chains and slats has a completely enclosed design, keeping crop losses to a minimum.

Automatic chain lubrication is standard on 6250 Plus.

Each roller is carried on heavy duty bearings.

FIXED CHAMBER BALERS

KVERNELAND 6350 PLUS

POWERMAX FULL ROLLER BALE CHAMBER

CONSISTENT PERFORMANCE IN ALL CONDITIONS

PowerMax full roller bale chamber for high density bale production

Full Roller Bale Chamber for Ultimum Versatility The bale chamber incorporates 17 heavy duty rollers with inner reinforcing discs. This is the ideal solution for producing well shaped and dense bales. The sturdy bale chamber driveline is conceived to withstand the most severe loads, with rollers mounted on heavy-duty remotely greased bearings.

Rigid steel pipes for hydraulic circuits.

Automatic chain lubrication with individually adjustable outlets.

Main bale chamber drives are by heavy duty 1 ¼ ” pitch chain for a longer lifetime and reduced maintenance.

All rollers are carried on heavy duty, greasable bearings. Bearings are easily serviced from centralized greasing banks.

FIXED CHAMBER BALERS

KVERNELAND 6350 PLUS

Top Performance in all Conditions The Kverneland 6350 Plus is the specialist baler for heavy silage conditions. The 17 small diameter ribbed profile rollers provide maximum density and superb bale rotation in all conditions, while at the same time keeping horsepower requirement to a minimum. Bale density can be selected from the comfort of the tractor cab for ultimate flexibility when working in changing crop conditions.

PowerMax Bale Chamber.

EFFICIENCY AND PERFORMANCE – are Unmatched

The optional bale ramp ensures the bale rolls clear of the tailgate to avoid having to reverse after completing each bale.

FIXED CHAMBER BALERS

SECTION OR VISION

HIGHER OUTPUT Lower labour cost

FIXED CHAMBER BALERS

KVERNELAND 6350 PLUS FLEXIWRAP SERIES

BALING AND WRAPPING SOLUTION KVERNELAND 6350 PLUS FLEXIWRAP SERIES

The 6350 Plus series FlexiWrap provides the optimum solution for integrated baling and wrapping in one pass. High capacity baling, combined with high speed wrapping for, fast and efficient operation.

The Product Range:

Kverneland 6350 Plus FlexiWrap Full roller for baling and wrapping in one go. Bale diameter 1,25m

FIXED CHAMBER BALERS

KVERNELAND 6350 PLUS FLEXIWRAP SERIES

VERSATILE ONE-MAN BALING

AND WRAPPING COMBINATION

New Kverneland 6350 Plus series FlexiWrap models combine high density baling, fast, accurate bale transfer and a high speed twin satellite wrapper. They are the ideal solution for one-man operation. Designed for working in demanding conditions, the unique bale transfer solution provides trouble free operation even on steep slopes.

FIXED CHAMBER BALERS

KVERNELAND 6350 PLUS FLEXIWRAP SERIES

Strong and Durable Chassis Design New FlexiWrap Plus series models feature a revised wrap around chassis which has been optimised to minimise crop build-up. Durable tandem axles provide maximum stability on both road and field. Larger standard equipment 560/45R22.5 Vredestein flotation tyres provide a lighter footprint for reduced field compaction in wet conditions.

Bale turner option. During transport the kit is automatically pivoted into a safe position on the wrapping unit.

Twin satellite wrapper with 2 pre-stretchers and 4 endless belts for fast and stable wrapping.

Easy Change of Film Roll

Twin cassettes for 10 spare film rolls operated hydraulically.

FIXED CHAMBER BALERS

KVERNELAND 6350 PLUS FLEXIWRAP SERIES

INTEGRATED

BALER WRAPPER COMBINATION

Once the net is applied to the bale the wrapping table moves forward under the tailgate of the baler.

The bale is dropped directly onto the wrapping table.

As soon as the bale is transferred away from the baler, the tailgate automatically closes, and baling can resume.

The wrapping table moves rapidly to the pre-stretchers and wrapping starts instantly.

FIXED CHAMBER BALERS

KVERNELAND 6350 PLUS FLEXIWRAP SERIES

Fast and Accurate Bale Transfer Once the net is applied to the bale the wrapping table moves towards the tailgate, ready to receive the finished bale. When the tailgate opens the bale is dropped directly onto the table (no interferring steps from baler to wrapping table). This provides secure bale transfer with no risk of the bale rolling off the table, even when working in hilly conditions. Once the bale is on the wrapping table it is transferred quickly to the satellite wrapper and wrapping starts instantly. High Speed Wrapping The wrapping table with 4 endless belts rotates the bale evenly during wrapping with no risk of film damage. The twin pre-stretchers ensure high speed wrapping, so the wrapping process will finish before the new bale is ready. The pre-stretchers are positioned close to the bale, to limit the amount of air trapped under the film during wrapping.

Kverneland 6350 Plus series Flexiwrap models provide a truly versatile baling and wrapping solution. With the ability to handle multiple crop types, a Vicon Flexiwrap gives you the opportunity to take on every baling task.

Handle Everything from the Comfort of the Tractor Seat Fully automatic control of baling and wrapping from the Tellus Pro terminal. Flexiwrap models are fully ISOBUS compatible, enabling direct connection to any ISOBUS tractor. On completion of bale formation, the wrapper triggers tailgate opening, bale transfer commences and the wrapping cycle starts. The complete machine functions fully automatically. Baler and wrapper status are continuously displayed on separate areas of the large Tellus Pro touch screen for maximum operator convenience.

Full ISOBUS compatibility as standard.

High speed wrapping – no risk of film damage

The wrapped bale can be unloaded automatically or manually anytime during formation of the next bale. Manual drop allows the driver to drop the bale in the most convenient place, for example dropped in line for easy pick-up. The low mounted wrapping table gently unloads the bale. In addition the FlexiWrap can be fitted with a bale turner. The bale is tipped off gently on its end, where the highest number of film layers are applied.

FIXED CHAMBER BALERS

PARTS & SERVICE

ORIGINAL PARTS & SERVICE

LET’S FOCUS ON YOUR BUSINESS

FIXED CHAMBER BALERS

PARTS & SERVICE

MYKVERNELAND

SMARTER FARMING ON THE GO

A personalised online platform tailored to your machine needs With MYKVERNELAND you will benefit from easy access to Kverneland’s online service tools. Receive first hand access to information on future developments and updates, operator and spare part manuals, FAQs and local VIP offers. All information is gathered in one place.

FIXED CHAMBER BALERS

TECHNICAL DATA

6000 Plus Fixed Chamber Series

6350 Plus SC14 FlexiWrap

6350 Plus SC25 FlexiWrap

Model

6250 Plus F

6250 Plus R 6250 Plus SC14 6350 Plus R 6350 Plus SC14 6350 Plus SC25

Dimensions & Weight Length m

4.10 2.52 2.30 2320

4.10 2.52 2.30 2620

4.10 2.52 2.30 2900

4.10 2.52 2.30 2840

4.10 2.52 2.30 3040

4.10 2.52 2.30 3340

7.45 2.98 3.10 5840

7.45 2.98 3.10 6140

Width m Height m

Weight appr. kg Bale Chamber Rollers (nb)

Slats (nb)

Diameter (m)

1.25 1.20

Width (m) Bale ramp

Tear drop plate Central roller bearing greasing system

Pick-up Working width (cm)

200

220

Tine rows (nb)

Tine spacing (mm) Crop deflector Roller crop press

2 Pneumatic gauge wheels Intake Fork Feeder

- -

- - -

- -

- - -

PowerFeed Rotor SuperCut 14 knives

- - - - - - -

- - - - - -

- - - - -

SuperCut 25 knives Single knife protection Double knife protection Knife group selection

- - - -

- -

Drop floor

Driveline 1 ¼" main chain Automatic chain lube system Shear bolt protection

Cam clutch protection

FIXED CHAMBER BALERS

TECHNICAL DATA

6000 Plus Fixed Chamber Series

6350 Plus SC14 FlexiWrap

6350 Plus SC25 FlexiWrap

Model

6250 Plus F

6250 Plus R 6250 Plus SC14 6350 Plus R 6350 Plus SC14 6350 Plus SC25

Binding (PowerBind) Net only variant Net & Twine variant

3 rolls

8 balls + 3 rolls 8 balls + 3 rolls 8 balls + 3 rolls 8 balls + 3 rolls 8 balls + 3 rolls

Wrapping Unit Support rollers / belts (nb)

- - - - -

2 / 4

2 Film pre-stretchers

2 Film cutters

Film roll magazine

Bale turner

Operation Focus 3 terminal (non Isobus versions only) Isobus compatibility option IsoMatch Tellus Go (only with Isobus option) IsoMatch Tellus (only with Isobus option) Hydraulic outlets

2SA

1SA+1DA

1DA+1DA

Wheels and Axles 11.5/80-15

- - -

15.0/55-17 19.0/45-17

- - - - -

500/50-17 (* tandem axle)

- - - -

- -

(*)

550/45-22.5

Hydraulic brakes

Air brakes

Others Reversible drawbar PTO (rpm)

540

Min. power requirements (kW/hp) Automatic bearing greasing system

37/50

45/60

51/70

59/80

73/100

82/110

Standard equipment Option

- Not available

Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute basis for any legal claim against Kverneland Group. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group reserves the right at any time to make changes to the design or specifications shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary, e.g. for maintenance purposes, please contact proper assistance or supervision of a technical assistant. © Kverneland Group Ravenna S.r.I.

FIXED CHAMBER BALERS

KVERNELAND FIXED CHAMBER BALERS 01/08.2021 / B-0203-EN

WHEN FARMING MEANS BUSINESS

kverneland.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32