Kverneland coltivatore turbo

TRIPLE FINGER HARROW

LEVELLING AND WEED CONTROL

A rear triple finger harrow is as option available on mounted Turbo version. It provides levelling and mechanical weed control by pulling the weeds out of the ground so that the roots dry out on the ground surface. This technique is particularly interesting for rhizome (quackgrass, bindwind …), and other weeds that could grow again if pressed by a packer straight after cultivation. The triple finger harrow can be adjusted by the setting angle and the hydraulic pressure via the parallelogram according to conditions. When using the cultivator for seed bed preparation, the triple finger harrow will perfectly support the required crumbling and levelling effect. The triple finger harrow is equipped with 750mm long fingers of 16mm diameter and individual spring- loaded protection. Depth wheels ensure the working depth of the cultivators. The triple finger harrow is hydraulically suspended: the pressure on the ground can be adjusted directly from the cab. For larger amounts of straw or residues, the operator can lift the finger harrow on the go by increasing the pressure in the system at any time with a manometer on the headstock to control it. Alternatively, when the finger harrow is being used for crumbling, the driver can reduce the pressure in the hydraulic system to increase the pressure of the finger harrow on the ground for more intensive work.

The single finger following harrow (Ø12 x 450mm) can be combined with all rollers. Interesting feature for shallow cultivation and mechanical weeding. The harrow also ensures an even levelled finish. SINGLE FINGER FOLLOWING HARROW

Mechanical weed control.

KVERNELAND TURBO