2300
KVERNELAND 2300 S VARIOMAT ® AND 2300 S
FOR EASY ADJUSTMENTS IN TOUGH CONDITIONS In addition, the Auto-line system corrects the pulling line automatically. This provides a real working comfort to the driver and low wear to soil parts.
Optimised robustness The Kverneland steel heat treatment technology applies to the complete plough to ensure its robustness and durability. The frame is not an exception. The 100 x 200 mm one box section frame is induction heat treated to gain the necessary strength for arduous conditions. No welding in order to avoid weaknesses. The headstock No 200 with its mono block turnover axle guarantees the required robustness for trouble free operations. Built for tough conditions, the Kverneland 2300 S series is available as a 3, 4, 4+1 and 5 furrow plough, recommended for 25-45 Hp per body. The Kverneland steel heat treatment technology and the design of the plough guarantee low lift and pulling requirements. Comfort with easy adjustments The Kverneland 2300 S series adapt to any tractors. For the Kverneland 2300 S Variomat model, when activating the Variomat ® , the front furrow is repositioned automatically. Therefore, the working width is kept equal from first to last body. It guarantees the precision of the overall ploughing performance. The working width varies from 30-50 cm or 35-55 cm for 85 cm or 100 cm interbody clearance.
High productivity The Variomat ® system allows easy adjustments to the preferred working widths. It optimises the fuel consumption in respect to the output, soil conditions and tractor capacity. One field can offer different soil conditions. The Variomat ® enables easy ploughing by changing the working width for the best result. The Auto-reset enables ploughing non stop in stony and heavy conditions. The plough and the tractor are protected while legs release independently one from another for a quality ploughing. The aero-profile legs limit potential blockage in high residues, manure, cover crops. Keep on ploughing efficiently with improved trash burying performance. Direct re-consolidation also contributes to a high productivity. Where you can plough, you can also use the Packomat. Save time: 2 operations in 1 pass only. Re-consolidating while ploughing. Cost efficient, Packomat does not increase pulling forces. The Kverneland packer arm and a wide range of Kverneland packers are also available.
For the stepwise model, Kverneland 2300 S, the interbody clearance is available as 85, 100 and 115 cm. The working width is easily adjusted by repositioning only 1 bolt per leg assembly from 30 to 55 cm depending on the interbody clearance. During turnover at headlands, an alignment cylinder incorporated within the main frame reduces stress on both tractor and plough. This optional memory system ensures that the desired furrow width setting is maintained following the plough reversing cycle. On sloping grounds, if the mechanical front furrow width adjustment is standard, a hydraulic cylinder is recommended. It controls the front furrow width "on the Move". A perfect ploughing implies setting skimmers at the correct depth. The skimmers slice off the top soil to place it efficiently at the bottom of the furrow. The adjustment of the depth of the Kverneland skimmers is central, easy and quick.
NEW GENERATION OF PLOUGHS
31
Powered by FlippingBook