KV ECOMAT
KVERNELAND ECOMAT
FITTED WITH THE UNRIVALLED ECOMAT BODIES
Common to the Ecomat series Kverneland offers 2 Ecomat models: one for in-furrow operations and one for on-land operations. Both benefit from the same Ecomat bodies and accessories for the best soil preparations. The Ecomat models robustness and easy adjustments for the highest performance are identical to any Kverneland ploughs. Both are easy to pull and to lift for the lowest fuel consumption and the lowest wear of parts. Kverneland Ecomat Built around a robust 100 x 150 mm induction heat treated frame, this 5 to 8 furrow implement, has a working capacity of up to 4 m (65 cm interbody clearance). The Ecomat features the trouble free headstock 200 which is recommended for 18-30 Hp/body (110-130 Hp for 6 furrows and 150-180 Hp for 8 furrows). The Ecomat has low lifting capacities: the 1st leg being attached to the sliding rail, the gravity center is hence close to the headstock.
With the Variomat ® , it is easy to vary the working width «on the move» (12-20", 30-50cm). The pulling line remains correct at any times thanks to the Auto line which guarantees the automatic adjustment of the pulling line when changing the working width. The Auto-reset legs enable a quality result even in stony or heavy soil conditions. For a seed bed preparation, the average speed is 8 Km/h (2,5-3,5 ha/h) while for stubble 3-4 ha/h are expected at a 12 km/h speed. For an immediate soil re-consolidation, the Packomat is available. It does not induce any extra pulling forces or extra fuel consumption. Its transport is pragmatic: placed above the Ecomat, it follows the Ecomat in transport. Such transport is possible via the 3 point linkage or the transport wheel.
ECO-STUBBLE, ECO-TILLAGE, ECO-PLOUGHING
31
Powered by FlippingBook