Kverneland Semi-mounted reversible ploughs

Brochure Kverneland Semi-mounted reversible ploughs

NAME PRODUCT BROCHURE SUBLINE SEMI-MOUNTED REVERSIBLE PLOUGHS PROFITABLE PLOUGHING

SECTION OR VISION

WHEN FARMING

MEANS BUSINESS

Realising the full potential of farming is about growing and developing your business, not only your crop or livestock, but also your profit. Improve productivity and profitability by focusing on the positives and minimising disadvantageous aspects, through strong, dedicated management. Success springs from determination and clear targets, from laying down the appropriate strategy and allocating correct investments for the future. Quality results require the right ideas and equipment. When there is work to be done, you need the optimal setup and smart solutions that support you towards an easier, more profitable way of working. You need solutions that make tough and demanding conditions less complicated.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

SECTION OR VISION

Preparing and cultivating your soil in order to achieve the highest possible yield is about choosing the correct tillage system TILLAGE

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

ARABLE TILLAGE SYSTEMS

YOUR KVERNELAND

INTELLIGENT FARMING SOLUTIONS

Choose the best farming solution for you and your land. Combine the highest possible yields with sustainability. This will start with the correct tillage. The choices you make depend on various factors and should match your specific circumstances, like soil structure, crop rotation, residue management, economic and ecological viabilities.

The choice is yours!

You must consider environmental and legal issues. From conventional methods to conservation tillage: the balance of operations at the right time has to be found to achieve high yields with the best soil condition (air, moisture, biological activity, etc.) with a minimum amount of energy, time and investment. For this, Kverneland offers a full range of intelligent farming solutions.

Conventional Tillage

Conservation Tillage

Vertical Tillage / No-Till • Extensive method

Strip Tillage • Strip-wise loosening before or during seeding of up to 1/3 of the row width (Loibl, 2006). Up to 70% of the soil surface remains untouched • Strip-till combines the soil drying and warming benefits of conventional tillage with the soil-protecting advantages of no-till by disturbing only the area of the soil where the seeds are placed • Exact fertilising deposit • Soil protection against erosion and drought

Mulch Tillage • Reduced intensively in terms of depth and frequency • More than 30% of residues are left on soil surface • Extended repose period of the soil • Cultivator and/or discs incorporate the crop residues within the top 10cm of soil for stable bearing soil • Full-width tillage - seedbed preparation and seeding in one pass • Protection against soil erosions with reduced lost of soil and water • Improvement of soil moisture retention

Conventional Tillage • Intensive method of cultivation • Complete soil inversion e.g. by a plough • Less than 15-30% crop residues left on soil surface • Seedbed preparation done by an active tool or special seedbed harrow • High phytosanitary effect by reduced pressure of weed and fungi diseases - fewer herbicides and fungicides needed • Better dry-off and faster increase of soil temperature for better nutrients absorbation

• Working soil vertically avoids additional horizontal layers or density changes • Increasing water infiltration, root development and nutrient take-up • Plants’ roots dictate the overall health of the plant, as they deliver nutrients and water throughout, contributing to a higher yield • A strong set of roots make plants more resistant to wind and drought • Indirect energy input

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

ARABLE TILLAGE SYSTEMS

KVERNELAND’S INTELLIGENT FARMING SOLUTION

SOIL COVERAGE AFTER SEEDING

DEEP TILLAGE (NOT A MUST)

SEEDBED PREPARATION

BASIC TILLAGE

SEEDING

WEEDING

SPREADING

SPRAYING

up to 15% Conventional with soil inversion

15 - 30% Reduced Till without soil inversion

> 30% Mulch Seeding without soil inversion

> 30% Strip Tillage stripewise loosening

Intensive Tillage Extensive Tillage

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

SECTION OR VISION

ROBUST

HIGH PERFORMANCE

ECONOMIC TO RUN

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

INTRODUCTION

OPTIMISED ROBUSTNESS

TO MAXIMISE PROFITABILITY

Robust Developed over 140 years, the Kverneland Steel Technology remains unsurpassed within the plough industry. It guarantees extra robustness for extra life time to the plough.

Economic to run The design of a Kverneland plough combined to the specific heat treatments of each and every part ensures low running cost. Easy to lift, easy to pull for a low fuel consumption; optimised low wearing of parts. High performance Kverneland innovations and design of parts enable a quick set up and adjustments for the perfect ploughed field.

Kverneland ploughs adapt to any tractor brands!

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

HISTORY

PERFORMANCE DRIVEN

FOR THE FARMERS SATISFACTION

Kverneland is world renowned and unequalled in producing robust & light ploughs for high performance with low operating costs.

Innovation from the start In 1879 at the age of 25, Ole Gabriel Kverneland

founded his smithy business in a small village south of Stavanger, Norway. Brought up on a farm and educated in agriculture, he subsequently understood all the machinery requirements of farmers. He strongly believed in innovation and manage to produce a mouldboard plough able to withstand the very tough stony soil conditions of Norway. Over the years, he together with his team of engineers developed special steel heat treatment processes to allow his ploughs to work in the toughest of soil. Using these new steels of unique strength, Kverneland succeeded in manufacturing robust ploughs thus gaining a strong reputation for quality. Today, Kverneland is the leading manufacturer of ploughs with a very strong market position throughout the world.

Ole Gabriel Kverneland

Ole Gabriel Kverneland: black smith & ploughman. Here demonstrating how well balanced his ploughs are. Even today Kverneland R&D employees are ploughmen.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

THE CONTEXT typical arable land in Norway

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

HISTORY

PERFORMANCE DRIVEN

FOR THE FARMERS SATISFACTION

Customer orientated The tradition of customer orientated product development has resulted in the long record of innovations and in becoming a leading plough brand in the industry. High priority is given to building close relationships with end users. Systematic follow up of individual customer experience helps Kverneland to adapt products to better match farmer’s requirements.

Kverneland plough factory (Norway)

Forge (1879)

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

THE RESULT high performance ploughing

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

VARIOMAT ®

OPTIMISED PRODUCTIVITY

Efficient The patented Kverneland Variomat ® is the most reliable system on the market. It allows the optimal match between the soil conditions, the plough and the tractor for the optimal output. By varying the furrow width, the work can be kept straighter. It is also easier to work up to the hedges and around obstacles. By being able the adapt not only the depth but also the width of the furrows, the best results can hence be achieved. Two different systems Kverneland Variomat ® is available in two variants: with hydraulic or mechanical adjustment of the furrow width. The hydraulic variant allows adjustments of the furrow width easily from the driver’s seat "On the Move". The pulling line adjusts automatically thanks to the auto-line. Straight pull at all times The position of the headstock remains in the center of the tractor, all the time, ensuring a favorable and an even geometry of the three point linkage. Side pull and unnecessary high landside pressure are therefore avoided. Consequently: reduced wearing of parts, reduced fuel consumption and increased profits.

Optimise fuel consumption By adapting the working width to the soil conditions, the fuel consumption is optimised. Furthermore, when increasing the ploughing width, the fuel consumption per Ha gets reduced and hence profits are maximised. Maintenance free The Kverneland Variomat ® system is maintenance free thanks to a unique non wearing linkage joint between the beams and the mainframe section. The system consists of a robust 24 mm bolt, a distance tube, two special heat-treated cones and replaceable bushes. No need to spend time on lubrifications.

The heat-treatment of high quality steels and exacting manufacturing accuracy guarantee perfect beam and body alignment with minimum wear.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

VARIOMAT ®

"On the Move" working width adjustments

50 cm/20"

30 cm/12"

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

HEAT TREATMENTS

KVERNELAND STEEL TECHNOLOGY

FOR THE COMPLETE PLOUGH

Kverneland’s unique steel More than 140 years of experience in developing special steels and heat treatment processes have resulted in an unsurpassed quality and wear resistance. The heat treatment processes are carried out and adapted not only to a few selected parts but to the complete plough. This results in ploughs lighter than competitors´ and extremely robust while delivering outstanding performance. Induction hardened frame To guarantee the durability of the plough, Kverneland heat treats the frame as well. Most competitors do not. The induction process allows using lesser steel than competitors, therefore less weight to pull and lift while ensuring a higher resistance.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

HEAT TREATMENTS

HARD

as a diamond for optimum wear resistance

FLEXIBLE

to absorb shocks

Kverneland 12 hours carburising process results in creating 2 steels in 1 sole mouldboard. For the highest ploughing performance, Kverneland also grinds the body to ensure a uniform surface for an even furrow.

AUTO-RESET

KVERNELAND AUTO-RESET SYSTEM

EFFICIENT AND MAINTENANCE FREE

Release characteristics The diagram shows the differences between three different Auto-reset systems, and how the pressure varies as the body rises (1 cm). Conclusion The unique Kverneland leaf spring Auto-reset system is highly recommended.

Benefits from Kverneland Auto-reset When hitting an obstacle, the pressure on the point, frame, plough parts, decreases. The stress on the plough is therefore reduced which guarantees a longer life to the plough. Each body releases independently one from another to come back to the correct ploughing depth once the obstable passed. This ensures a quality ploughing.

2500

Hydraulic system

Release height (cm)

Coil spring system

2000

Kverneland Auto-reset (decompression system)

1500

Source: R&D Department, Kverneland Group, Klepp 2002

1000

500

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

BODIES

BODY NO. 28 AND BODY NO. 38

THE ANSWER FOR PLOUGHING WITH WIDE TYRES

Bodies No. 28 and No. 38 are Kverneland’s answer to ploughing with modern farm tractors equipped with wide tyres. Wide empty furrow Bodies No. 28 and No. 38 shape and action move the soil further away from the landside, increase the furrow bottom width by as much as 25% compared to body No. 9. This allows wide tractor tyres, like a 710 serie type, to work in the furrow without rolling down the previous furrow. Body No. 38 enables ploughing from shallow to deeper than body No. 28. Low pulling forces Body No. 28 is suitable for depths from 12 to 30 cm (5 to 12 inches) and widths from 30 to 55 cm (12 to 22 inches). Longer than body No. 8, it creates a flatter profile for an improved tilth. The furrow is well turned and packed. Bodies No. 28 & No. 38 clever design will require as little pulling force as body No. 8 or 9.

100

furrow profile body No. 28 working depth: 26 cm, buttom: 30 cm, width 73 cm

Body No. 28 • universal body – easy to pull • for any soil conditions

• recommended for tractors with large tyres • creates a flatter profile for improved tilth • perfect turning of the furrow slice

• working depth: 12-30 cm • working width: 30-55 cm • landside / mouldboard: 40°

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

BODIES

Body No. 30 • finger mouldboard with 4 exchangeable strips • plastic spacers • for any soil conditions • intensive crumbling

Body No. 8 • general purpose body • for light to heavy soils • working depth: 15-28 cm • working width: 30-50 cm • landside / mouldboard: 40°

Body No. 9 • universal body • for light and medium soil • easy to pull • working depth: 18-30 cm • working width: 30-50 cm • landside / mouldboard: 40°

• working depth: 18-35 cm • working width: 30-55 cm • landside / mouldboard: 46°

Body No. 38 • universal body – easy to pull • for any soil conditions • recommended for tractors with large tyres

Body No. 40 • for wet, sticky, abrasive, stony conditions • recommended for tractors with large tyres • crumble effect. Marked furrows at low speed (winter ploughing) • best cleaning effect in sticky conditions

Body No. 34 • plastic mouldboard • long and slim shape (similar to body No. 28) • for soils with high humus content without stones • advised for tractors with large tyres • easy pulling

• from deep to shallow ploughing • perfect turning of the furrow slice

• working depth: 12-35 cm • working width: 30-55 cm • landside / mouldboard: 40°

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

MAXIMISE PLOUGHING

ON-LAND/IN-FURROW

EASY TO ADJUST

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

PN/RN

KVERNELAND PN/RN

COST EFFICIENT, EASY TO ADJUST AND TO MAINTAIN

Optimise Profitability Kverneland PN/RN semi-mounted ploughs are robust, easy to handle, economic to run while delivering a high quality output. They offer a strong and simple construction via a standard 200 x 200 mm frame from 5 to 9 furrows, a manual working width adjustment and an automatic steered center wheel. The PN version is fitted with auto-reset beams for stony conditions whilst the RN has rigid beams with shearbolt protections. Maximise ploughing The centre mounted wheel provides easy ploughing out to fences, hedges and ditches. The wheel assembly is linked to the turnover mechanism ensuring a safe reversal of the plough. High manoeuvrability This unique headstock enables a minimum turning circle: the turning point of the plough is situated behind the headstock. The plough is linked to the tractor by means of a special joint for improved manoeuvrability. Headstock Cat. III or IV. In-Furrow and On-Land The In-Furrow models can be retrofitted with an On-Land kit while the On-Land models can also plough In-Furrow. Either way, the adjustment is hydraulic. The On-Land models suit tractors with up to 3,60 m outer wheel/track width.

For any conditions Generous underbeam clearances for trashy conditions:

• 70/75 cm for the PN • 70/80 cm for the RN Most models are extendable with one furrow (maximum 9 furrow plough). Optional equipment The Kverneland PN/RN are available with a choice of body types, skimmers and disc coulters, whilst hydraulic front furrow width adjustment is optional. Easy furrow width adjustment The furrow width can be adjusted from 35 to 45 cm (14, 16, 18”) in steps of 5 cm. The adjustment is carried out by repositioning only one bolt in each leg assembly.

The position of the wheel must be adjusted when altering the furrow width. This is easily done via a turnbuckle.

The front furrow adjustment can be done either via a turnbuckle or hydraulically.

Parking Optional parking stands for parking in butterfly position.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

EASY TO PULL

OPTIMISE PERFORMANCE

EASY TO MANOEUVRE

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

PG VARIOMAT ®

KVERNELAND PG VARIOMAT ®

FOR EASY PLOUGHING RIGHT OUT TO THE FIELD EDGE

PG offers good stability in work and in transport, tight turning circle for narrow headlands and the opportunity to plough right up to field boundaries.

Easy “On the Move” working width adjustments Kverneland Variomat ® adjustment is standard. Infinitely variable furrow widths from 35 to 50 cm (14 to 20”). The work rate can therefore be increased up to 30%. The Variomat ® cylinder is placed into the towing tube for best protection. This design protects the cylinder and hoses from possible damage and guarantees an operational simplicity. The mid frame wheel position and the compact headstock design (which places the front body as close to the tractor as possible) ensures tight turning ability both on headlands and into narrow gateways. Auto-Reset system The PG version is fitted with the well-known Kverneland Auto-reset leg protection for high ploughing performance. It also lingers the life time of both plough and tractor. Optimise performance The PG plough is easy to pull even with 8 furrows. Smooth turnovers, high manoeuvrability and “On the Move” working width adjustments make ploughing comfortable and performant.

Packer arm and packers available for immediate re-consolidation

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

OPTIMISED WEIGHT TRANSFER

HIGH PERFORMANCE

HIGH MANOEUVRABILITY

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

6300 S VARIOMAT ®

KVERNELAND 6300 S VARIOMAT ®

LOW OPERATING COST AND IDEAL WEIGHT TRANSFER

Maximise profitability The Kverneland 6300 S Variomat ® plough features a rear mounted wheel. It results in a well balance weight transfer from the wheel of the plough to the tractors rear wheels. Consequently, the plough is easy to pull. Fuel consumption is hence optimised to its strick minimum. The easy pulling effect minimises the wear of parts while the ploughing performance are maximised. The three point linkage feature prevents high forces on the tractor during ploughing and transportation which lingers the tractor life time. Choice of Cat. III/IV. Outstanding Kverneland auto-reset The aero-profile legs and the 80 cm under beam clearance enable easy ploughing in high residues. Not least, the famous Kverneland auto-reset system enables high ploughing performance even in heavy and stony soils conditions. Easy adjustment of releasing forces (P. 43) Variations “On the Move” The Kverneland 6300 S ploughs consist of robust 5-8 furrow models designed for large acreages. The Variomat ® facilitates easy “On the Move” working width changes whenever necessary. Easy furrow width adjustments As with all Kverneland ploughs, manual front furrow width adjustment is by means of a turnbuckle. For “On the Move” adjustments when ploughing on sloping ground, an hydraulic cylinder can be fitted as an alternative.

High ploughing performance The large rear wheel enables a high stability especially in wet conditions. It limits sinking and compaction. High ploughing performance will also be achieved by adjusting skimmers to the correct depth. The Kverneland 6300 S is equipped with a right/left central skimmer adjustment system for quick operations (P. 43). Robust for long lasting The induction heat treated 200 x 200 mm frame, one box section with no welding that could weaken it, ensures the robustness of the plough. As for any Kverneland models, the Kverneland steel heat treatments are applied to the complete plough for an outstanding durability. Easy headland The rear wheel assembly is linked hydraulically to a robust turnover mechanism ensuring that the plough is always positioned correctly for re-entry into work. The hydraulic system provides a small reversing radius and an excellent manoeuvrability during work and transportation. Easy changeover from work to transport position For transport, the plough is placed in half-reversed position within seconds. Its low centre of gravity ensures a safe transport. Even where space is restricted, the plough can be steered with ease around obstacles.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

EASY TO OPERATE

FLEXIBLE

EFFICIENT

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

PW/RW AND PW/RW VARIOMAT ®

KVERNELAND PW/RW AND PW/RW VARIOMAT ® OPTIMISE PROFITABILITY

Efficient These ploughs are designed to maximise output and to keep ploughing performance at their highest level. The integrated Packomat enables the immediate re-consolidation of the soil: 2 operations in 1 pass. Productivity is maximised. Flexible The PW/RW ploughs offer different versions in size and features in order to adapt to your needs. The «3 in 1» concept gives the opportunity to either plough at maximum capacity or to uncouple the front from the rear parts. Hence, to adapt to any fields configurations and soils conditions thanks to a semi- mounted wagon plough or a mounted reversible plough.

Easy to operate Kverneland ploughs are designed for the simplest and most efficient way to be operated. The PW/RW ploughs benefit from the ATS / ISOBUS user friendly technology to be operated. For instance, only 3 finger tips on the Isomatch Tellus screen to turnover the plough (and Packomats) at headlands. And just a few minutes to uncouple the front from the rear part.

Both ploughs can also be used simultaneously in 2 different fields at the same time when needed.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

PW/RW AND PW/RW VARIOMAT ®

KVERNELAND PW/RW AND PW/RW VARIOMAT ® EFFICIENT AND FLEXIBLE

Quality ploughing The wagon plough follows the ground undulations in a smooth way thanks to the centre section consisting of a 3 point linkage system. It therefore behaves like a normal mounted plough. Increased output The plough is available with either manual adjustable working width or with the famous Kverneland Variomat ® system, allowing “On the Move” furrow width adjustments from the tractor seat. The ploughing width can be adjusted from 35 to 50 cm (14-20”). The output is then increased up to 30%. Robust design and very easy to operate Kverneland engineering skills have made it possible to construct a plough capable to withstand the high stresses on such a large reversible plough, particularly when ploughing at depth and at speed. Not least, the plough remains easy to operate.

A unique patented concept in building a semi-mounted reversible plough.

Kverneland “3 in 1” Concept The Kverneland PW/RW semi-mounted ploughs consist of a robust central wheel wagon plough at the front and a mounted reversible plough at the rear. The latter can be either a standard Kverneland mounted reversible EG/LB or ED/LD. Flexibility This unique design gives you the flexibility to choose the right combination of ploughs to suit any soil conditions: either the whole wagon plough or only the front or the rear plough: “3 ploughs in 1”. In some situations, it may be advantageous to use only the front part in very wet or very hard conditions, or due to the availability of a tractor. The heavy front section alone will provide optimum performance in any conditions.

The Kverneland PW features the renowned Auto-reset system while the RW model offers shearbolt leg protections.

Likewise, you can use the rear mounted reversible plough for ploughing smaller areas or headlands.

Simple and quick The rear plough can be uncoupled within a few minutes and be ready for use. Likewise, it only takes a short time to join them together. At any time, you have the freedom to choose.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

IM FARMING

KVERNELAND PW/RW AND PW/RW VARIOMAT ® EASY TO OPERATE

Optimised management A large plough may look very difficult to manage but the Kverneland PW/ RW “3 in 1” model is equipped with an advanced management system which makes it very easy to operate. You can choose between different systems: • ATS Control (Automatic Turning Sequence). Option: ISOBUS compatible • manual management with the addition of a valve controller • manual management via tractor control When equipped with the ATS system, the plough is very easy to operate on the headlands. It is only necessary to lift the plough at the front, press the ATS button 3 times and the plough reversing functions operate automatically in accordance to the driving on the headland. The plough will then be ready for the next ploughing operation. The rear plough section, equipped with an hydraulic toplink, is held in a raised position during the turning phase. This secures perfect “ins” and “outs” at the headlands. Safe and easy turning When turning on the headland, the centre section lowers the plough for optimum stability and safety. With 80% of the plough’s weight on the centre section, the tractor is free to make tight turns. The centre section design also provides excellent manoeuvrability during work and transport.

Generous clearance Choose between an underbeam clearance of 70 or 75 cm on the PW and 70 or 80 cm on the RW, for trashy conditions. The PW/RW “3 in 1” plough are available with a choice of bodies, skimmers, disc coulters and wheel equipments to suit all soils and tractor types. 3 versions for the PW/RW ploughs: • In-Furrow • In-Furrow and narrow On-Land (approx. 3.2 m track width) • On-land (approx. 4.5 m track width) Off-set adjustment to correct the driving position is via in-cab hydraulic control. Safe in transport Changeover from work to transport is carried out in a few seconds: the plough is turned half way and then lowered on its centre section. In “butterfly” position the plough is very stable and manoeuvrable with approximately 20% of its weight being transferred on to the tractor’s linkage. As an option, both PW/RW can be equipped with brakes and full road lightings.

Transport position

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

IM FARMING

EASY SHORT HEADLANDS

IsoMatch Tellus 1200 • User friendly touch screen

ATS display control

EASY HANDLING

100% INTEGRATED

ECONOMIC

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

PACKOMAT

KVERNELAND PACKOMAT

EFFICIENT SOIL PREPARATION

100% integrated Packer Packomat follows the plough from transport to work. Compared to other packers, the Packomat offers high productivity gains. Easy handling From the tractor cabin, it is easy to position the Packomat for transport or work or even lifted for ploughing on field bounderies. Optimised levelling Choice of front harrows to crush clods and ring diameters to re-consolidate the soil.

Ploughing and re-consolidating are two operations carried out in only one pass with no extra cost. Packomat contributes to maximise profitability. Efficient Packomat works in any ploughing conditions. Soil preparation can be extended to seedbed. Available from 4 to 12 furrow Kverneland ploughs, Packomat is an efficient tool. No need for extra manpower for a safe transport. Agronomic benefits The combination of ploughing and re-consolidating is both efficient and environmentally friendly. Soils are loosened, organic matters are incorporated to enrich the soils. Weeds are controlled mechanically. The elevation of temperature of the ploughed soil is actually positive. The associated water evaporation is limited by the immediate re-consolidation by the Packomat rings. Water capilarity is hence re-established for the benefit of the soil life.

Packomat is a Kverneland invention

Maximised profits Packomat contributes to the balance of the plough in work. No extra pulling forces are needed and hence no extra fuel. The landside pressure is actually reduced and therefore the wear of the landsides.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

KNOCK-ON ®

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

KNOCK-ON ®

KVERNELAND KNOCK-ON ®

QUICK & EASY

Smart The Knock-on ® system consists of only 2 parts: a holder fixed to a regular Kverneland share and a Knock-on ® point. Clever Kverneland Knock-on ® is a universal system. Plough Knock-on ® points can also be used for cultivators. Long lasting Knock-on ® benefits from the Kverneland steel technology (quality steels + Kverneland heat treatments). The quality of the steel combined with a clever design ensure a long life to the Knock-on ® system. Therefore, Knock-on ® points can be used in any soil conditions. Quick Knock-on ® points are changed in a few seconds. It makes sense to save 90% of your time in changing points when working in abrasive soils (points wear quicker) or when having a 5+ furrow plough.

Easy The only tools needed are a chisel and a hammer (2 kg). Field tests reveal that, as an average, 3 points can be mounted on the same Knock-on ® holder. No bolt to unscrew helps save time. In addition, when the holder is worn out, it is normally also time to change the share, without unscrewing the holder. Very handy!

Agronomic benefits

Good soil penetration & Stable in work Knock-on ® has been tested in several soil conditions. Even in the hardest soils, the points ensure a good penetration. Low pulling forces Kverneland bodies are reknown for their unrivalled low pulling forces. With Knock-on ® points, the pulling forces remain low and hence the fuel consumption. Soil flow protection The clever design of Knock-on ® actually protects the other parts of the body while allowing an efficient soil flow.

Soil flow protects other parts.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

QUICK-FIT

KVERNELAND QUICK-FIT

FOR TOUGH CONDITIONS

High quality for low wear The patented Quick-Fit system consists of a share, a special holder and a very unique point. All parts are made of Kverneland Top Quality Steel which benefit from a unique Kverneland heat treatment to guaranty their robustness and low wear for an optimal life time. The share and holder are bolted to the body, while the Quick-Fit point is fitted to the holder by a unique locking system. It fits just by a few sharp taps with a hammer. Not least, when the points need to be changed, it is simply removed by means of a taper drift and a hammer. Maximise productivity The Quick-Fit points take far less time to change than conventional equivalents. Hence the machine is back in work much quicker. One farmer from North Yorkshire, UK, comments “We have reduced downtime from about 30 minutes to five minutes when changing points on our 8 furrow reversible plough ... the Quick-Fit system is also quite versatile. If we are in some very hard, dry conditions and are struggling for penetration, we can simply knock-off a set of partly worn points and put on new ones while in the field to get the plough in the ground.”

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

XHD CARBIDE

XHD CARBIDE REINFORCED PARTS STRONGER THAN EVER

Additional protection of steel body

Extremely shock resistant

Avoids wearing the steel point

Corner Tiles make the difference The traditional method of reinforcing steel parts is to apply flat tungsten carbide tiles to the surface of the cutting edge. However, these only protect the surface - not the cutting edge. All cutting edges of the Kverneland XHD range are equipped with Corner Tiles. These specially designed tiles wrap around the leading edge, protecting both the surface and edge from wear and damage. The result is a sharper, long lasting edge – that remains resistant to shocks and breakages from hard impacts.

Kverneland’s XHD Carbide reinforced parts are designed with the most extreme conditions in mind. With a lifetime up to 8 to 10 times the life* of the standard parts, they keep costs and downtime to a minimum. Kverneland`s tried and proved heat treatment processes paired with groundbreaking new designed Tungsten Carbide tiles will provide the best weapon against abrasive soils.

*Based on average test conditions. Depending on soil type, moisture content, machine type, working speed, working depth, machine width and mounting position.

ACCESSORIES

TO MAXIMISE EFFICIENCY

Manure skimmer

Maize skimmer

Easy adjustable skimmers To ensure optimum positioning of the skimmer, a quick adjusting system is incorporated on all plough models. The skimmers are available in two versions: standard manure and maize skimmers for those difficult conditions with large amounts of trash.

Trashboards Particularly useful when large quantities of surface trash are present (manure, straw etc.)

Shares Shares with Reversible Points: The most cost efficient system to plough in difficult conditions like hard or abrasive soils. Shares with Flush Fit Points: Recommended for ploughing in sticky soil conditions. The point is fixed by means of a single bolt and is therefore quickly replaced.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

ACCESSORIES

Plain disc coulter

Notched disk coulter

Disc Coulters Available in sizes 45, 50 and 55 cm (18, 20 or 22") diameter, plain or notched. Disc coulters are mounted on single arms. Easy to adjust to suit all conditions.

Sword Share Knives These are an alternative to disc coulters, either to reduce weight or to avoid blockage from trash and stones. It can only be used on ploughs fitted with reversible points.

Landside Knives A very good alternative to disc coulters, either to reduce weight or to avoid blockage from trash and stones. A good combination with skimmers.

Eco share Designed to 10 cm below the normal ploughing depth. Also an alternative for up to 10 cm narrower ploughing depth.

Furrow Opener For use on the rear body to increase the width of the furrow bottom in order to accept tractors with larger tyres: up to 30” wide for example.

Furrow Splitter Bolted to any parts of the mouldboard or share, the furrow splitter is designed to cut through heavy soils making it easier for the following operations.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

ACCESSORIES

LEG PROTECTIONS

LINGER THE EQUIPTMENT LIFE TIME

HD package with 9 leaves (900 kp)

Double spring package with 14 leaves (1400 kp)

Auto-reset protection: add extra leaves when needed The standard Auto-reset system includes 7 Kverneland heat treated springs (640 kp). For heavier to extreme soil conditions, extra leaf springs are added for up to 1400 kp.

Shear bolt legs Release pressure: 4500 kg

Hydraulic stone protection Adjustable release pressure from 600 to 2100 kg

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

ACCESSORIES

FOR EXTRA BENEFITS

Aero-profile legs protected by: • mechanical leaf spring Auto-reset system • easy adjustable releasing forces (add/remove springs)

Release force (kN)

Type

Standard pack, 6 leaf springs HD pack, 7 leaf springs XHD pack, 8 leaf springs Double pack, 6+4 leaf springs

11,2 12,7 14,4 16,9

Central adjustment of skimmers • Right/left skimmers adjust simultaneously, centrally

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

ACCESSORIES

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

ACCESSORIES

WIDE CHOICE OF WHEELS

Model

400 x 22.5

500 x 22.5

440/80 x 24

PN/RN PG 6300 S Variomat PW/RW

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

PARTS & SERVICE

ORIGINAL PARTS & SERVICE

LET’S FOCUS ON YOUR BUSINESS

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

PARTS & SERVICE

MYKVERNELAND

SMARTER FARMING ON THE GO

A personalised online platform tailored to your machine needs With MYKVERNELAND you will benefit from easy access to Kverneland’s online service tools. Receive first hand access to information on future developments and updates, operator and spare parts manuals, FAQs and local VIP offers. All information is gathered in one place.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

TECHNICAL DATA

Model

Interbody clearance (cm)

Type of beam

Working width (cm)

Underbeam clearance (cm)

No. of furrows

Weight (kg) Horse power requirement (hp) 4 5 6 7 8 91011124 5 6 7 8 9101112

PN PN RN RN

100 115 100 115 100 115 100 115 100 100 100 115 100 115

Autom. Autom.

35-40-45

70/75 70/75 70/80 70/80 70/75 70/75

5-9 5-7 5-9 5-7 6-8 5-8 6-8 5-7

– 2820 3090 3360 3630 3900 –

– – – – – – – –

125 150 175 200 225 –

– – – – – – – –

40-45

– 2920 3200 3500 –

–

125 150 175 –

–

Shearbolt Shearbolt

35-40-45

– 2650 2885 3120 3360 3600 –

125 150 175 200 225 –

40-45 35-50 35-50 35-55 35-55 35-50 35-50 35-50 35-50 35-50 35-50

– 2750 3000 3250 –

–

– – – – –

125 150 175 –

–

– – – – –

PG V PG V

Autom. Autom. Autom. Autom. Autom.

–

– 2940 3370 3800 –

–

150 175 200 –

– 2970 3060 3150 3240 –

125 150 175 200 –

6300 S V 6300 S V

80 80

–

– 3340 3720 4100 –

–

150 175 200 –

– 3060 3430 3820 –

–

125 150 175 –

–

PW RW

70/75 70/80 70/75 70/75 70/80 70/80

7-12 7-12 7-12 7-10 7-12 7-10

– – – – – –

– 5045 5510 6015 6480 6945 7440 – – 4695 5130 5565 6050 6495 6940 – – 5150 5630 6150 6630 7130 7620 –

– – – – – –

210 240 270 300 330 360 210 240 270 300 330 360 210 240 270 300 330 360

Shearbolt

PW V PW V RW V RW V

Autom. Autom.

– 5185 5670 6195 6680 –

–

210 240 270 300 –

–

Shearbolt Shearbolt

– 4800 5250 5700 6200 6660 7120 –

210 240 270 300 330 360

– 4835 5290 5745 6250 –

–

210 240 270 300 –

–

Weights are given for ploughs with 100 cm ‘interbody clearance’ without optional equipment. For ploughs with 115 cm clearance, please add 15 kg/body.

Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute basis for any legal claim against Kverneland Group. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group reserves the right at any time to make changes to the design or specifications shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary, e.g. for maintenance purposes, please contact proper assistance or supervision of a technical assistant. © Kverneland Group Operations Norway. ® = trademark protection in the EU.

KVERNELAND SEMI-MOUNTED REVERSIBLE PLOUGHS

KVERNELAND SMRP 772307 10/09/2025

WHEN FARMING MEANS BUSINESS kverneland.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48