Kverneland mounted reversible ploughs

HEADSTOCKS

ROBUST HEADSTOCKS

FOR MAXIMUM DURABILITY

Transport lock The headstocks are equipped with an integrated transport lock to transport the plough in the “butterfly” position. Front furrow width adjustment The width of the front furrow is adjusted separately, either with a turnbuckle or with a cylinder. Sequence valve The sequence valve controls the reversing cycle of the plough. It automatically activates an alignment valve which "narrows" the plough prior to reversal. After reversal, the plough returns to its working position. This system gives a smoother reversal of the plough bodies and is supplied as standard on all five and six furrow ED/LD ploughs. Memory valve The memory valve together with the memory-sequence valve, which is used on the large Variomat ® ploughs, is also activated during reversal. It closes the plough down

Three different headstocks The Kverneland program has three different headstocks. All of them are constructed from the highest quality steel and are subject to the special Kverneland heat treatment processes which infuse additional properties such as strength and hardness. Strong sealed roller bearings are used for years of trouble-free and maintenance free service. Smooth and safe turnover The headstocks employ a strong 80 mm turnover cylinder, positioned at the rear of the headstock mast to give correct and safe turnover, even for the largest ploughs. The design retains the proven Kverneland concept of having the centre of gravity close to the tractor in order to minimise lift requirement and to improve stability. Clever layout of hoses To avoid the risk of hose damage during the turnover operation, no hoses pass over the turning point of the headstock. Even the valve block is integrated.

to the narrowest ploughing width of 12” (30 cm) before reversing. Once the cycle is completed, it returns automatically to the pre-set furrow width. The memory valve is fitted to all five and six furrow EG/LB models. Also available for 4 furrow EG/LB and 4, 5, 6 furrow ES/LS models. Quick coupling All headstocks can be fitted with quick coupling cross shaft. Cross shaft The Kverneland cross shafts are supplied cat. II, III and IV.

KVERNELAND MOUNTED REVERSIBLE PLOUGHS